Skip to contentSkip to conversation

spidev t20 on 2.6.36.2 kernel problem

DISCUSSION Горюнов Михаил 2 participants 6 messages Apr 3, 2013 – Apr 4, 2013 5 messages not in the archive Tegra architecture support

lore
Share & tools
lore
#0 lore raw

Hello!
BOARD: QuadMo747-X/T20
i get kernel 2.6.36.2 from nvidia tegra partners: Toradex Colibri (http://developer.toradex.com/software-resources/arm-family/linux/source-code/linux-(colibri-t20)-source-code), and SecoQseven (http://www.secoqseven.com/en/download/downloads.html)

I build kernel with option "User mode SPI device support" Example of my board-harmony.c file in attachment

While

echo -ne "x5c">/dev/spidev1.1 &
kernel module interface spi freezes. (bash not responding, and ignore SIGKILL) if i run spidev_test.c from Documentation/spi folder - process spidev_test freezes

/*
* arch/arm/mach-tegra/board-harmony.h
*
* Copyright (C) 2010 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms. *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/

#ifndef _MACH_TEGRA_BOARD_HARMONY_H
#define _MACH_TEGRA_BOARD_HARMONY_H

void harmony_pinmux_init(void);
void harmony_power_off_init(void);
int harmony_regulator_init(void);
int harmony_panel_init(void);
int harmony_sdhci_init(void);

#endif

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw

Sorry, the file board-harmony.c in an attachment

03.04.2013, 10:56, "Goryunov Michael" <[email protected]>:

Quoted 4 lines

Hello!
BOARD: QuadMo747-X/T20
i get kernel 2.6.36.2 from nvidia tegra partners: Toradex Colibri (http://developer.toradex.com/software-resources/arm-family/linux/source-code/linux-(colibri-t20)-source-code), and SecoQseven (http://www.secoqseven.com/en/download/downloads.html)

Quoted 8 lines

I build kernel with the option "User mode SPI device support" Example of my board-harmony.c file in attachment

While

echo-ne "x5c">/dev/spidev1.1 &
kernel module interface spi freezes. (bash is not responding, and ignore SIGKILL) if i run spidev_test.c from Documentation/spi folder - process spidev_test freezes

/*
* arch/arm/mach-tegra/board-harmony.c
*
* Copyright (C) 2010 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms. *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/clk.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/dma-mapping.h>
#include <linux/pda_power.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-tegra.h>
#include <linux/tegra_usb.h>
#include <linux/usb/android_composite.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/usb_phy.h>
#include <asm/setup.h>

#include <mach/suspend.h>
#include <mach/audio.h>
#include <mach/i2s.h>
#include <mach/tegra_das.h>
#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/nand.h>
#include <mach/clk.h>
#include <mach/pci.h>

#include "clock.h"
#include "board.h"
#include "board-harmony.h"
#include "clock.h"
#include "devices.h"
#include "gpio-names.h"
#include <mach/spdif.h>

#include <linux/spi/spi.h>

/* NVidia bootloader tags */
#define ATAG_NVIDIA 0x41000801

#define ATAG_NVIDIA_RM 0x1
#define ATAG_NVIDIA_DISPLAY 0x2
#define ATAG_NVIDIA_FRAMEBUFFER 0x3
#define ATAG_NVIDIA_CHIPSHMOO 0x4
#define ATAG_NVIDIA_CHIPSHMOOPHYS 0x5
#define ATAG_NVIDIA_PRESERVED_MEM_0 0x10000
#define ATAG_NVIDIA_PRESERVED_MEM_N 2
#define ATAG_NVIDIA_FORCE_32 0x7fffffff

#ifdef CONFIG_TEGRA_OSC_CRYSTAL_FREQ_12MHZ
#define OSC_CTL_FREQ 12000000
#else
#ifdef CONFIG_TEGRA_OSC_CRYSTAL_FREQ_13MHZ
#define OSC_CTL_FREQ 13000000
#endif
#endif

//Catani

#define EXT_MEM_CTRL_BASE               0x7000F400
#define EXT_MEM_FBIO_CFG5_0             0x00000104
#define EXT_MEM_ODT_WRITE_0             0x000000B0
#define EXT_MEM_ODT_READ_0              0x000000B4

#define EXT_MEM_TIMING_CTRL_0 0x00000028

static void harmony_ODT_disable(void)

{
        u32 volatile reg;
        static void __iomem *mc = IO_ADDRESS(EXT_MEM_CTRL_BASE);

        //printk (KERN_ERR "Shutting down ODT");
        reg = 0x00000083;
        __raw_writel(reg, mc + EXT_MEM_FBIO_CFG5_0);
        reg = 0x00000000;
        __raw_writel(reg, mc + EXT_MEM_ODT_WRITE_0);
        reg = 0x00000000;
        __raw_writel(reg, mc + EXT_MEM_ODT_READ_0);
        reg = 0x00000001;
        __raw_writel(reg, mc + EXT_MEM_TIMING_CTRL_0);
}

// Deasserisce PERST1
static void pcie_reset(void)

{
        u32 volatile reg;
        static void __iomem *mc = IO_ADDRESS(0x6000d00c);

        reg = __raw_readl(mc);
        reg |= 0x00000002;
        __raw_writel(reg, mc);

        reg = __raw_readl(mc + 0x10);
        reg |= 0x00000002;
        __raw_writel(reg, mc + 0x10);

        reg = __raw_readl(mc + 0x20);
        reg |= 0x00000002;
        __raw_writel(reg, mc + 0x20);
}
struct tag_tegra {
	__u32 bootarg_key;
	__u32 bootarg_len;
	char bootarg[1];
};

static int __init parse_tag_nvidia(const struct tag *tag)

{
	return 0;
}

__tagtable(ATAG_NVIDIA, parse_tag_nvidia);

static struct tegra_nand_chip_parms nand_chip_parms[] = {
	/* Samsung K5E2G1GACM */
	[0] = {
	       .vendor_id = 0xEC,
	       .device_id = 0xAA,
	       .read_id_fourth_byte = 0x15,
	       .capacity  = 256,
	       .timing = {
			  .trp = 21,
			  .trh = 15,
			  .twp = 21,
			  .twh = 15,
			  .tcs = 31,
			  .twhr = 60,
			  .tcr_tar_trr = 20,
			  .twb = 100,
			  .trp_resp = 30,
			  .tadl = 100,
			  },
	       },
	/* Hynix H5PS1GB3EFR */
	[1] = {
	       .vendor_id = 0xAD,
	       .device_id = 0xDC,
	       .read_id_fourth_byte = 0x95,
	       .capacity  = 512,
	       .timing = {
			  .trp = 12,
			  .trh = 10,
			  .twp = 12,
			  .twh = 10,
			  .tcs = 20,
			  .twhr = 80,
			  .tcr_tar_trr = 20,
			  .twb = 100,
			  .trp_resp = 20,
			  .tadl = 70,
			  },
	       },
};
struct tegra_nand_platform harmony_nand_data = {
	.max_chips = 8,
	.chip_parms = nand_chip_parms,
	.nr_chip_parms = ARRAY_SIZE(nand_chip_parms),
	.wp_gpio = TEGRA_GPIO_PC7,
};

static struct resource resources_nand[] = {
[0] = {
.start = INT_NANDFLASH,
.end = INT_NANDFLASH,
.flags = IORESOURCE_IRQ,
},
};

struct platform_device tegra_nand_device = {
	.name = "tegra_nand",
	.id = -1,
	.num_resources = ARRAY_SIZE(resources_nand),
	.resource = resources_nand,
	.dev = {
		.platform_data = &harmony_nand_data,
	},
};
static struct plat_serial8250_port debug_uart_platform_data[] = {
	{
	 .membase = IO_ADDRESS(TEGRA_UARTC_BASE),
	 .mapbase = TEGRA_UARTC_BASE,
	 .irq = INT_UARTC,
	 .flags = UPF_BOOT_AUTOCONF,
	 .iotype = UPIO_MEM,
	 .regshift = 2,
	 .uartclk = 216000000,
	 }, {
	     .flags = 0
	 }
};
static struct platform_device debug_uart = {
	.name = "serial8250",
	.id = PLAT8250_DEV_PLATFORM,
	.dev = {
		.platform_data = debug_uart_platform_data,
		},
};

/* PDA power */
static struct pda_power_pdata pda_power_pdata = {
};

static struct platform_device pda_power_device = {
	.name = "pda_power",
	.id = -1,
	.dev = {
		.platform_data = &pda_power_pdata,
		},
};

static struct platform_device tegra_rfkill =

{
	.name = "tegra_rfkill",
	.id   = -1,
};
static struct i2c_board_info harmony_i2c_bus1_board_info[] = {
	{
	 I2C_BOARD_INFO("wm8903", 0x1a),
	 },
};
static struct tegra_i2c_platform_data harmony_i2c1_platform_data = {
	.adapter_nr = 0,
	.bus_count = 1,
	.bus_clk_rate = {400000, 0},
};
static const struct tegra_pingroup_config i2c2_ddc = {
	.pingroup = TEGRA_PINGROUP_DDC,
	.func = TEGRA_MUX_I2C2,
};
static const struct tegra_pingroup_config i2c2_gen2 = {
	.pingroup = TEGRA_PINGROUP_PTA,
	.func = TEGRA_MUX_I2C2,
};
static struct tegra_i2c_platform_data harmony_i2c2_platform_data = {
	.adapter_nr = 1,
	.bus_count = 2,
	.bus_clk_rate = {400000, 100000},
	.bus_mux = {&i2c2_ddc, &i2c2_gen2},
	.bus_mux_len = {1, 1},
};
static struct tegra_i2c_platform_data harmony_i2c3_platform_data = {
	.adapter_nr = 3,
	.bus_count = 1,
	.bus_clk_rate = {400000, 0},
};
static struct tegra_i2c_platform_data harmony_dvc_platform_data = {
	.adapter_nr = 4,
	.bus_count = 1,
	.bus_clk_rate = {400000, 0},
	.is_dvc = true,
};
static struct tegra_utmip_config utmi_phy_config[] = {
    [0] = {
            .hssync_start_delay = 0,
            .idle_wait_delay = 17,
            .elastic_limit = 16,
            .term_range_adj = 6,
            .xcvr_setup = 15,
            .xcvr_lsfslew = 2,
            .xcvr_lsrslew = 2,
    },
    [1] = {
            .hssync_start_delay = 0,
            .idle_wait_delay = 17,
            .elastic_limit = 16,
            .term_range_adj = 6,
            .xcvr_setup = 9,
            .xcvr_lsfslew = 2,
            .xcvr_lsrslew = 2,
    },
};
static struct tegra_ulpi_config ulpi_usb2_config = {
	.reset_gpio = TEGRA_GPIO_PV1,
	.clk = "clk_dev2",
};
static struct tegra_ehci_platform_data tegra_ehci_pdata[] = {
    [0] = {
            .phy_config = &utmi_phy_config[0],
            .operating_mode = TEGRA_USB_DEVICE,
            .power_down_on_bus_suspend = 0,
    },
    [1] = {
            .phy_config = &ulpi_usb2_config,
            .operating_mode = TEGRA_USB_HOST,
            .power_down_on_bus_suspend = 1,
    },
    [2] = {
            .phy_config = &utmi_phy_config[1],
            .operating_mode = TEGRA_USB_HOST,
            .power_down_on_bus_suspend = 0,
    },
};
static struct tegra_audio_platform_data tegra_audio_pdata = {
        .dma_on         = true, /* use dma by default */
        .i2s_clk_rate   = 24576000,
        .dap_clk        = "clk_dev1",
        .audio_sync_clk = "audio",
        .mode           = I2S_BIT_FORMAT_I2S,
        .fifo_fmt       = I2S_FIFO_16_LSB,
        .bit_size       = I2S_BIT_SIZE_16,
};
static struct tegra_das_platform_data tegra_das_pdata = {
        .tegra_dap_port_info_table = {
                [0] = {
                        .dac_port = tegra_das_port_none,
                        .codec_type = tegra_audio_codec_type_none,
                        .device_property = {
                                .num_channels = 0,
                                .bits_per_sample = 0,
                                .rate = 0,
                                .dac_dap_data_comm_format = 0,
                        },
                },
                /* AC97 <--> DAC1 <--> DAP1 <--> Hifi Codec */
                [1] = {
                        .dac_port = tegra_das_port_ac97,
                        .codec_type = tegra_audio_codec_type_hifi,
                        .device_property = {
                                .num_channels = 2,
                                .bits_per_sample = 16,
                                .rate = 44100,
                                .dac_dap_data_comm_format = dac_dap_data_format_pcm,
                        },
                },
                [2] = {
                        .dac_port = tegra_das_port_none,
                        .codec_type = tegra_audio_codec_type_none,
                        .device_property = {
                                .num_channels = 0,
                                .bits_per_sample = 0,
                                .rate = 0,
                                .dac_dap_data_comm_format = 0,
                        },
                },
                [3] = {
                        .dac_port = tegra_das_port_none,
                        .codec_type = tegra_audio_codec_type_none,
                        .device_property = {
                                .num_channels = 0,
                                .bits_per_sample = 0,
                                .rate = 0,
                                .dac_dap_data_comm_format = 0,
                        },
                },
                [4] = {
                        .dac_port = tegra_das_port_none,
                        .codec_type = tegra_audio_codec_type_none,
                        .device_property = {
                                .num_channels = 0,
                                .bits_per_sample = 0,
                                .rate = 0,
                                .dac_dap_data_comm_format = 0,
                        },
                },
        },
  .tegra_das_con_table = {
                [0] = {
                        .con_id = tegra_das_port_con_id_hifi,
                        .num_entries = 2,
                        .con_line = {
                                [0] = {tegra_das_port_ac97, tegra_das_port_dap1, true},
                                [1] = {tegra_das_port_dap1, tegra_das_port_ac97, false},
                        },
                },
        }
};
static struct tegra_audio_platform_data tegra_spdif_audio_pdata = {
	.tdm_enable = true,
	.num_slots = 4,
	.dma_on = 0,
	.fifo_fmt = 0,
	.mode = SPDIF_BIT_MODE_MODE16BIT,
};

static char *usb_functions[] = { "mtp", "usb_mass_storage" };

static struct android_usb_product usb_products[] = {
        {
                .product_id     = 0x7102,
                .num_functions  = ARRAY_SIZE(usb_functions),
                .functions      = usb_functions,
        },
};

static struct android_usb_platform_data andusb_plat = {

	.vendor_id              = 0x0955,
	.product_id             = 0x7102,
	.manufacturer_name      = "NVidia",
	.product_name           = "SECO Quadmo747-X/T20",
	.serial_number          = NULL,

.num_products = ARRAY_SIZE(usb_products), .products = usb_products, .num_functions = ARRAY_SIZE(usb_functions), .functions = usb_functions,
};

static struct platform_device androidusb_device = {
        .name   = "android_usb",
        .id     = -1,
        .dev    = {
                .platform_data  = &andusb_plat,
        },
};

static void harmony_usb_init(void)

{
    tegra_ehci2_device.dev.platform_data=&tegra_ehci_pdata[1];
    platform_device_register(&tegra_ehci2_device);
    tegra_ehci3_device.dev.platform_data=&tegra_ehci_pdata[2];
    platform_device_register(&tegra_ehci3_device);
}
static struct platform_device *harmony_devices[] __initdata = {
	&debug_uart,
	&tegra_uartb_device,
	&tegra_rfkill,
	&tegra_nand_device,
	&tegra_udc_device,
	&androidusb_device,
	&pda_power_device,
	&pmu_device,
	&tegra_spi_device1,
	&tegra_spi_device2,
	&tegra_spi_device3,
	&tegra_spi_device4,
	&tegra_gart_device,
	//&tegra_i2s_device1,
	//&tegra_i2s_device2,
	&tegra_ac97_device,
	&tegra_das_device,
	&tegra_avp_device,

#ifdef CONFIG_TEGRA_ALSA_SPDIF
&tegra_spdif_input_device,
#endif
};

static void harmony_i2c_init(void)

{
	tegra_i2c_device1.dev.platform_data = &harmony_i2c1_platform_data;
	tegra_i2c_device2.dev.platform_data = &harmony_i2c2_platform_data;
	tegra_i2c_device3.dev.platform_data = &harmony_i2c3_platform_data;
	tegra_i2c_device4.dev.platform_data = &harmony_dvc_platform_data;

	i2c_register_board_info(0, harmony_i2c_bus1_board_info, 1);

	platform_device_register(&tegra_i2c_device1);
	platform_device_register(&tegra_i2c_device2);
	platform_device_register(&tegra_i2c_device3);
	platform_device_register(&tegra_i2c_device4);
}

static void __init tegra_harmony_fixup(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)

{
	mi->nr_banks = 2;
	mi->bank[0].start = PHYS_OFFSET;
	mi->bank[0].size = 448 * SZ_1M;
	mi->bank[1].start = SZ_512M;
	mi->bank[1].size = SZ_512M;
}
static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = {
	/* name         parent          rate            enabled */
	{ "clk_dev1",   NULL,           26000000,       true},
	{ "clk_m",      NULL,           OSC_CTL_FREQ,   true},
	{ "3d",         "pll_m",        266400000,      true},
	{ "2d",         "pll_m",        266400000,      true},
	{ "vi",         "pll_m",        50000000,       true},
	{ "vi_sensor",  "pll_m",        111000000,      false},
	{ "epp",        "pll_m",        266400000,      true},
	{ "mpe",        "pll_m",        111000000,      false},
	{ "pll_c",      "clk_m",        600000000,      true},
	{ "pll_c_out1", "pll_c",        240000000,      true},
	{ "vde",        "pll_m",        240000000,      false},
	{ "pll_p",      "clk_m",        216000000,      true},
	{ "pll_p_out1", "pll_p",        28800000,       true},
	{ "pll_a",      "pll_p_out1",   56448000,       true},
	{ "pll_a_out0", "pll_a",        11289600,       true},
	{ "i2s1",       "pll_a_out0",   11289600,       true},
	{ "audio",      "pll_a_out0",   11289600,       true},
	{ "audio_2x",   "audio",        22579200,       false},
	{ "pll_p_out2", "pll_p",        48000000,       true},
	{ "pll_p_out3", "pll_p",        72000000,       true},
	{ "i2c1_i2c",   "pll_p_out3",   72000000,       true},
	{ "i2c2_i2c",   "pll_p_out3",   72000000,       true},
	{ "i2c3_i2c",   "pll_p_out3",   72000000,       true},
	{ "dvc_i2c",    "pll_p_out3",   72000000,       true},
	{ "csi",        "pll_p_out3",   72000000,       false},
	{ "pll_p_out4", "pll_p",        108000000,      true},
	{ "pll_p_out4", "pll_p",        24000000,      true},
	//{ "sclk",       "pll_p_out4",   108000000,      true},
	//{ "hclk",       "sclk",         108000000,      true},
	//{ "pclk",       "hclk",         54000000,       true},
	{ "spdif_in",   "pll_p",        36000000,       false},
	{ "csite",      "pll_p",        144000000,      true},
	{ "uartd",      "pll_p",        216000000,      true},
	{ "host1x",     "pll_p",        144000000,      true},
	{ "disp1",      "pll_p",        216000000,      true},
	{ "pll_d",      "clk_m",        594000000,      false},
	{ "pll_d_out0", "pll_d",        297000000,      false},
	{ "dsi",        "pll_d",        594000000,      false},
	{ "pll_u",      "clk_m",        OSC_CTL_FREQ*40,true},
	{ "clk_d",      "clk_m",        OSC_CTL_FREQ*2, true},
	{ "timer",      "clk_m",        OSC_CTL_FREQ,   true},
	{ "i2s2",       "clk_m",        11289600,       false},
	{ "spdif_out",  "clk_m",        OSC_CTL_FREQ,   false},
	{ "spi",        "clk_m",        OSC_CTL_FREQ,   false},
	{ "xio",        "clk_m",        OSC_CTL_FREQ,   false},
	{ "twc",        "clk_m",        OSC_CTL_FREQ,   false},
	{ "sbc1",       "clk_m",        OSC_CTL_FREQ,   false},
	{ "sbc2",       "clk_m",        OSC_CTL_FREQ,   false},
	{ "sbc3",       "clk_m",        OSC_CTL_FREQ,   false},
	{ "sbc4",       "clk_m",        OSC_CTL_FREQ,   false},
	{ "ide",        "clk_m",        OSC_CTL_FREQ,   false},
	{ "ndflash",    "clk_m",        108000000,      true},
	{ "vfir",       "clk_m",        OSC_CTL_FREQ,   false},
	{ "sdmmc1",     "clk_m",        48000000,       true},
	{ "sdmmc2",     "clk_m",        48000000,       true},
	{ "sdmmc3",     "clk_m",        48000000,       false},
	{ "sdmmc4",     "clk_m",        48000000,       true},
	{ "la",         "clk_m",        OSC_CTL_FREQ,   false},
	{ "owr",        "clk_m",        OSC_CTL_FREQ,   false},
	{ "nor",        "clk_m",        12000000,       false},
	{ "mipi",       "clk_m",        OSC_CTL_FREQ,   false},
	{ "i2c1",       "clk_m",        3000000,        false},
	{ "i2c2",       "clk_m",        3000000,        false},
	{ "i2c3",       "clk_m",        3000000,        false},
	{ "dvc",        "clk_m",        3000000,        false},
	{ "uarta",      "clk_m",        OSC_CTL_FREQ,   false},
	{ "uartb",      "pll_p",        216000000,      true},
	{ "uartc",      "pll_p",        216000000,      true},
	{ "uarte",      "clk_m",        OSC_CTL_FREQ,   false},
	{ "cve",        "clk_m",        OSC_CTL_FREQ,   false},
	{ "tvo",        "clk_m",        OSC_CTL_FREQ,   false},
	{ "hdmi",       "clk_m",        OSC_CTL_FREQ,   false},
	{ "tvdac",      "clk_m",        OSC_CTL_FREQ,   true},
	{ "disp2",      "clk_m",        OSC_CTL_FREQ,   true},
	{ "usbd",       "clk_m",        OSC_CTL_FREQ,   false},
	{ "usb2",       "clk_m",        OSC_CTL_FREQ,   false},
	{ "usb3",       "clk_m",        OSC_CTL_FREQ,   true},
	{ "isp",        "clk_m",        OSC_CTL_FREQ,   false},
	{ "csus",       "clk_m",        OSC_CTL_FREQ,   false},
	{ "pwm",        "clk_32k",      32768,          false},
	{ "clk_32k",    NULL,           32768,          true},
	{ "pll_s",      "clk_32k",      32768,          false},
	{ "rtc",        "clk_32k",      32768,          true},
	{ "kbc",        "clk_32k",      32768,          true},
	{ "spdif_in",	"pll_m",		22579000,		true},
	{ "spdif_out",	"pll_a_out0",	5644800,		true},
	{"ac97",        "pll_a_out0",   24576000,       true},
	{ NULL,         NULL,           0,              0},
};
static struct tegra_suspend_platform_data harmony_suspend = {
	.cpu_timer = 5000,
	.cpu_off_timer = 5000,
	.core_timer = 0x7e7e,
	.core_off_timer = 0x7f,
	.separate_req = true,
	.corereq_high = false,
	.sysclkreq_high = true,
	.suspend_mode = TEGRA_SUSPEND_LP0,
};

#if defined(CONFIG_TEGRA_PCI)

static struct tegra_pci_platform_data harmony_pci_platform_data = {
	.port_status[0] = 1,
	.port_status[1] = 1,
	.use_dock_detect = 0,
	.gpio           = TEGRA_NR_GPIOS+2,
};

static void harmony_pcie_init(void)

{
	tegra_pci_device.dev.platform_data = &harmony_pci_platform_data;
	platform_device_register(&tegra_pci_device);
}

#endif

static struct spi_board_info tegra_spi_device __initdata = {

	 .modalias = "spidev",
	 .bus_num = 1,
	 .chip_select = 1,
	 .mode = SPI_MODE_0,
	 .max_speed_hz = 1000000,
	 .platform_data = NULL,
	 .irq = 0,

};

static void __init harmony_spidev_init(void)

{
	spi_register_board_info(&tegra_spi_device, 1);
}

static void __init tegra_harmony_init(void)

{
	tegra_common_init();

	tegra_init_suspend(&harmony_suspend);

	tegra_clk_init_from_table(harmony_clk_init_table);

	harmony_pinmux_init();
	//pcie_reset(); // deasserisce PERST1 // BSC
	harmony_regulator_init();

	//tegra_i2s_device1.dev.platform_data = &tegra_audio_pdata[0];
	//tegra_i2s_device2.dev.platform_data = &tegra_audio_pdata[1];
	tegra_das_device.dev.platform_data = &tegra_das_pdata;
	tegra_ac97_device.dev.platform_data = &tegra_audio_pdata;
	tegra_spdif_input_device.name = "spdif";
	tegra_spdif_input_device.dev.platform_data = &tegra_spdif_audio_pdata;

	platform_add_devices(harmony_devices, ARRAY_SIZE(harmony_devices));

	harmony_usb_init();
	harmony_panel_init();
	harmony_sdhci_init();
	harmony_i2c_init();
	harmony_spidev_init();
	harmony_power_off_init();
	harmony_ODT_disable(); //Catani
#if defined(CONFIG_TEGRA_PCI)
	harmony_pcie_init();

#endif
}

MACHINE_START(HARMONY, "harmony")

    .boot_params  = 0x00000100,
    .phys_io      = IO_APB_PHYS,
    .io_pg_offst  = ((IO_APB_VIRT) >> 18) & 0xfffc,
    .fixup        = tegra_harmony_fixup,
    .init_irq     = tegra_init_irq,

.init_machine = tegra_harmony_init,
.map_io = tegra_map_common_io,
.timer = &tegra_timer,
MACHINE_END

#3 lore raw
In reply to a message not in the archive
Quoted 3 lines · Горюнов Михаил

Hello!
BOARD: QuadMo747-X/T20
i get kernel 2.6.36.2 from nvidia tegra partners: Toradex Colibri (http://developer.toradex.com/software-resources/arm-family/linux/source-code/linux-(colibri-t20)-source-code), and SecoQseven (http://www.secoqseven.com/en/download/downloads.html)

For that kernel, you will need to get support from whoever supplied the kernel; Toradex or Seco.

If you can reproduce the problem using an upstream kernel instead, then this list may be an appropriate place to get support. Feel free to ask questions about porting the upstream kernel to your board here.

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#6 lore raw
Quoted 7 lines · Mikhail Goryunov

03.04.2013, 20:48, "Stephen Warren" <[email protected]>:

Quoted 6 lines · Goryunov Mikhail
Quoted 4 lines

Hello!
BOARD: QuadMo747-X/T20
i get kernel 2.6.36.2 from nvidia tegra partners: Toradex Colibri (http://developer.toradex.com/software-resources/arm-family/linux/source-code/linux-(colibri-t20)-source-code), and SecoQseven (http://www.secoqseven.com/en/download/downloads.html)

Quoted 8 lines
Quoted 6 lines

For that kernel, you will need to get support from whoever supplied the kernel; Toradex or Seco.

If you can reproduce the problem using an upstream kernel instead, then this list may be an appropriate place to get support. Feel free to ask questions about porting the upstream kernel to your board here.

Upstream kernel is something, which is located at kernel.org ?

Yes.

A message that is not in the archive (sent off-list or not yet received): [email protected]

#8 lore raw

By the way in the upstream kernel 3.8.5 in my opinion there is no header file with registers of tegra t20?

04.04.2013, 21:36, "Stephen Warren" <[email protected]>:

Quoted 20 lines · Mikhail Goryunov
Quoted 6 lines

03.04.2013, 20:48, "Stephen Warren" <[email protected]>:

Quoted 4 lines · Goryunov Mikhail
Quoted 3 lines

Hello!
BOARD: QuadMo747-X/T20
i get kernel 2.6.36.2 from nvidia tegra partners: Toradex Colibri (http://developer.toradex.com/software-resources/arm-family/linux/source-code/linux-(colibri-t20)-source-code), and SecoQseven (http://www.secoqseven.com/en/download/downloads.html)

Quoted 7 lines
Quoted 6 lines

For that kernel, you will need to get support from whoever supplied the kernel; Toradex or Seco.

If you can reproduce the problem using an upstream kernel instead, then this list may be an appropriate place to get support. Feel free to ask questions about porting the upstream kernel to your board here.

The Upstream kernel is something, which is located at kernel.org ?

Yes.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): [email protected]

#10 lore raw
Quoted 1 line · Mikhail Goryunov

By the way in the upstream kernel 3.8.5 in my opinion there is no header file with registers of tegra t20?

Which aspect of the registers?

If you mean the base address of each HW module: that is described in device-tree now. See arch/arm/boot/dts/tegra20.dtsi.

If you mean the individual register fields for each module, those are part of the individual drivers; either in the .c file or an accompanying .h file. For example, drivers/gpio/gpio-tegra.c or sound/soc/tegra/tegra20_i2s.h.