PCAP RTC driver (for 2.6.32).
PATCH 1/1 PCAP RTC driver (for 2.6.32).
RTC driver for PCAP2 PMIC.
This patch was sent some time ago and acked by Alessandro, but we had to change some stuff on the core driver and consequently on this driver too, so I'm submitting it again for review (sorry).
--- drivers/rtc/Kconfig | 7 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-pcap.c | 222 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 230 insertions(+), 0 deletions(-)
drivers/rtc/Kconfig +7 -0
@@ -759,4 +759,11 @@ config RTC_DRV_PS3 This driver can also be built as a module. If so, the module will be called rtc-ps3. +config RTC_DRV_PCAP + tristate "PCAP RTC" + depends on EZX_PCAP + help + If you say Y here you will get support for the RTC found on + the PCAP2 ASIC used on some Motorola phones. + endif # RTC_CLASS
drivers/rtc/Makefile +1 -0
@@ -52,6 +52,7 @@ obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o +obj-$(CONFIG_RTC_DRV_PCAP) += rtc-pcap.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o
drivers/rtc/rtc-pcap.c new file +222 -0
222 lines not on this page · raw message
Signature · 4 lines
tg: (3ef3153..) ezx/pcap_rtc (depends on: ezx/local/pcap) -- Daniel Ribeiro
Quoted 8 lines · On Thu, 25 Jun 2009 17:45:49 -0300 Daniel Ribeiro <[email protected]> wrote:
RTC driver for PCAP2 PMIC.
This patch was sent some time ago and acked by Alessandro, but we had to change some stuff on the core driver and consequently on this driver too, so I'm submitting it again for review (sorry).
Signed-off-by guiming zhuo <[email protected]>Signed-off-by Daniel Ribeiro <[email protected]>
Signature · 6 lines
Best regards, Alessandro Zummo, Tower Technologies - Torino, Italy http://www.towertech.it
Em Qui, 2009-06-25 às 22:53 +0200, Alessandro Zummo escreveu:
Quoted 11 lines
Quoted 8 lines
RTC driver for PCAP2 PMIC.
This patch was sent some time ago and acked by Alessandro, but we had to change some stuff on the core driver and consequently on this driver too, so I'm submitting it again for review (sorry).
Signed-off-by guiming zhuo <[email protected]>Signed-off-by Daniel Ribeiro <[email protected]>Acked-by Alessandro Zummo <[email protected]>
Wow, this was fast! Thanks! :)
Alessandro, as there are no dependencies on other subsystems, it would be good if this driver gets merged through your tree. Is this ok for you?
Signature · 1 line
Daniel Ribeiro
Quoted 9 lines · On Thu, 25 Jun 2009 18:16:09 -0300 Daniel Ribeiro <[email protected]> wrote:
Quoted 3 lines
Acked-by Alessandro Zummo <[email protected]>Wow, this was fast! Thanks! :)
Alessandro, as there are no dependencies on other subsystems, it would be good if this driver gets merged through your tree. Is this ok for you?
Usually, when I Ack-by and the patch is available on linux-kernel, Andrew
picks it up.
Signature · 6 lines
Best regards, Alessandro Zummo, Tower Technologies - Torino, Italy http://www.towertech.it
Quoted 8 lines · On Thu, 25 Jun 2009 17:45:49 -0300 Daniel Ribeiro <[email protected]> wrote:
RTC driver for PCAP2 PMIC.
This patch was sent some time ago and acked by Alessandro, but we had to change some stuff on the core driver and consequently on this driver too, so I'm submitting it again for review (sorry).
Signed-off-by guiming zhuo <[email protected]>Signed-off-by Daniel Ribeiro <[email protected]>
The above paragraph contains nothing which is relevant to the final commit changelog, so I removed it. I thus ended up without any changelog at all.
Oh well - perhaps there wasn't much to say anyway.
Quoted 59 lines
diff -puN
drivers/rtc/Kconfig~pcap-rtc-driver-for-2632drivers/rtc/Kconfigdrivers/rtc/Kconfig renamed from drivers/rtc/Kconfig~pcap-rtc-driver-for-2632 +7
-0@@ -778,4 +778,11 @@ config RTC_DRV_PS3 This driver can also be built as a module. If so, the module will be called rtc-ps3. +config RTC_DRV_PCAP + tristate "PCAP RTC" + depends on EZX_PCAP + help + If you say Y here you will get support for the RTC found on + the PCAP2 ASIC used on some Motorola phones. + endif # RTC_CLASSdiff -puN
drivers/rtc/Makefile~pcap-rtc-driver-for-2632drivers/rtc/Makefiledrivers/rtc/Makefile renamed from drivers/rtc/Makefile~pcap-rtc-driver-for-2632 +1
-0@@ -53,6 +53,7 @@ obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max obj-$(CONFIG_RTC_DRV_MSM6242) += rtc-msm6242.o obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o +obj-$(CONFIG_RTC_DRV_PCAP) += rtc-pcap.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.odiff -puN
/dev/nulldrivers/rtc/rtc-pcap.cdrivers/rtc/rtc-pcap.c new file +29
-0@@ -0,0 +1,222 @@ +/* +* pcap rtc code for Motorola EZX phones +* +* Copyright (c) 2008 guiming zhuo <[email protected]> +* Copyright (c) 2009 Daniel Ribeiro <[email protected]> +* +* Based on Motorola's rtc.c Copyright (c) 2003-2005 Motorola +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/mfd/ezx-pcap.h> +#include <linux/rtc.h> +#include <linux/platform_device.h> + +struct pcap_rtc { +struct pcap_chip *pcap; +struct rtc_device *rtc; +}; + +static irqreturn_t pcap_rtc_irq (int irq,void *_pcap_rtc) +{ +struct pcap_rtc *pcap_rtc = _pcap_rtc;
drivers/rtc/rtc-pcap.c line 39
Quoted 10 lines
drivers/rtc/rtc-pcap.c new file +10
-0+unsigned long rtc_events =0 ; + +if (irq ==pcap_to_irq (pcap_rtc->pcap,PCAP_IRQ_1HZ )) + rtc_events |=RTC_IRQF |RTC_UF ; +else if (irq ==pcap_to_irq (pcap_rtc->pcap,PCAP_IRQ_TODA )) + rtc_events |=RTC_IRQF |RTC_AF ; + +rtc_update_irq (pcap_rtc->rtc,1 , rtc_events); +return IRQ_HANDLED ; +}
This could be coded more simply:
unsigned long rtc_events; if (irq == pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_1HZ)) rtc_events = RTC_IRQF | RTC_UF; else if (irq == pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_TODA)) rtc_events = RTC_IRQF | RTC_AF;
Quoted 8 lines
drivers/rtc/rtc-pcap.c new file +8
-0+static int pcap_rtc_read_alarm (struct device *dev,struct rtc_wkalrm *alrm) +{ +struct platform_device *pdev =to_platform_device (dev); +struct pcap_rtc *pcap_rtc =platform_get_drvdata (pdev); +struct rtc_time *tm = &alrm->time; +unsigned long secs; +u32 tmp; +
drivers/rtc/rtc-pcap.c line 58
Quoted 10 lines
drivers/rtc/rtc-pcap.c new file +10
-0+ezx_pcap_read (pcap_rtc->pcap,PCAP_REG_RTC_TODA , &tmp); + secs = tmp &PCAP_RTC_TOD_MASK ; + +ezx_pcap_read (pcap_rtc->pcap,PCAP_REG_RTC_DAYA , &tmp); + secs += (tmp &PCAP_RTC_DAY_MASK ) *SEC_PER_DAY ; + +rtc_time_to_tm (secs, tm); + +return 0 ; +}
SEC_PER_DAY is defined in include/linux/mfd/ezx-pcap.h. It should not be, because it is not specific to that driver and can be used elsewhere in the kernel.
I'd suggest that we
- define SECS_PER_DAY in include/linux/time.h
- remove the private definitions of SECS_PER_DAY from arch/m68k/mac/misc, arch/parisc/include/asm/rtc.h, arch/ia64/hp/sim/boot/fw-emu.c, fs/udf/udftime.c, fs/fat/misc.c and wherever else it appears, make those files use the common definition
- migrate rtc-pcap.c from SEC_PER_DAY over to the common SECS_PER_DAY.
- Then do it all again for SECS_PER_MIN and SECS_PER_HOUR.
What a mess.
None of the above is applicable in the context of this patch.
drivers/rtc/rtc-pcap.c line 66
Quoted 7 lines
drivers/rtc/rtc-pcap.c new file +7
-0+static int pcap_rtc_set_alarm (struct device *dev,struct rtc_wkalrm *alrm) +{ +struct platform_device *pdev =to_platform_device (dev); +struct pcap_rtc *pcap_rtc =platform_get_drvdata (pdev); +struct rtc_time *tm = &alrm->time; +unsigned long secs; +u32 tmp;
"tmp" is a poor identifier. We had an opportunity here to use an identifier which would communicate useful information to the reader. But we blew it and used the information-free "tmp" instead.
Something like
u32 time_of_day; /* In seconds since midnight */
would be nice. If that is indeed what the variable contains. How would I know? It's called 'tmp" and is undescribed!
Quoted 33 lines
drivers/rtc/rtc-pcap.c new file +33
-0+rtc_tm_to_time (tm, &secs); + + tmp = secs %SEC_PER_DAY ; +ezx_pcap_write (pcap_rtc->pcap,PCAP_REG_RTC_TODA , tmp); + + tmp = secs /SEC_PER_DAY ; +ezx_pcap_write (pcap_rtc->pcap,PCAP_REG_RTC_DAYA , tmp); + +return 0 ; +} + +static int pcap_rtc_read_time (struct device *dev,struct rtc_time *tm) +{ +struct platform_device *pdev =to_platform_device (dev); +struct pcap_rtc *pcap_rtc =platform_get_drvdata (pdev); +unsigned long secs; +u32 tmp; + +ezx_pcap_read (pcap_rtc->pcap,PCAP_REG_RTC_TOD , &tmp); + secs = tmp &PCAP_RTC_TOD_MASK ; + +ezx_pcap_read (pcap_rtc->pcap,PCAP_REG_RTC_DAY , &tmp); + secs += (tmp &PCAP_RTC_DAY_MASK ) *SEC_PER_DAY ; + +rtc_time_to_tm (secs, tm); + +return rtc_valid_tm (tm); +} + +static int pcap_rtc_set_mmss (struct device *dev,unsigned long secs) +{ +struct platform_device *pdev =to_platform_device (dev); +struct pcap_rtc *pcap_rtc =platform_get_drvdata (pdev);
drivers/rtc/rtc-pcap.c line 110
Quoted 10 lines
drivers/rtc/rtc-pcap.c new file +10
-0+u32 tmp; + + tmp = secs %SEC_PER_DAY ; +ezx_pcap_write (pcap_rtc->pcap,PCAP_REG_RTC_TOD , tmp); + + tmp = secs /SEC_PER_DAY ; +ezx_pcap_write (pcap_rtc->pcap,PCAP_REG_RTC_DAY , tmp); + +return 0 ; +}
etceteras
drivers/rtc/rtc-pcap.c line 124
Quoted 13 lines
drivers/rtc/rtc-pcap.c new file +13
-0+static inline int pcap_rtc_irq_enable (struct device *dev,int pirq, +unsigned int en) +{ +struct platform_device *pdev =to_platform_device (dev); +struct pcap_rtc *pcap_rtc =platform_get_drvdata (pdev); + +if (en) +enable_irq (pcap_to_irq (pcap_rtc->pcap, pirq)); +else +disable_irq (pcap_to_irq (pcap_rtc->pcap, pirq)); + +return 0 ; +}
Inlining this function probably made the code larger and slower.
Quoted 87 lines
drivers/rtc/rtc-pcap.c new file +87
-0+static int pcap_rtc_alarm_irq_enable (struct device *dev,unsigned int en) +{ +return pcap_rtc_irq_enable (dev,PCAP_IRQ_TODA , en); +} + +static int pcap_rtc_update_irq_enable (struct device *dev,unsigned int en) +{ +return pcap_rtc_irq_enable (dev,PCAP_IRQ_1HZ , en); +} + +static const struct rtc_class_ops pcap_rtc_ops = { + .read_time = pcap_rtc_read_time, + .read_alarm = pcap_rtc_read_alarm, + .set_alarm = pcap_rtc_set_alarm, + .set_mmss = pcap_rtc_set_mmss, + .alarm_irq_enable = pcap_rtc_alarm_irq_enable, + .update_irq_enable = pcap_rtc_update_irq_enable, +}; + +static int __devinit pcap_rtc_probe (struct platform_device *pdev) +{ +struct pcap_rtc *pcap_rtc; +int timer_irq, alarm_irq; +int err = -ENOMEM ; + + pcap_rtc =kmalloc (sizeof (struct pcap_rtc ),GFP_KERNEL ); +if (!pcap_rtc) +return err; + + pcap_rtc->pcap =platform_get_drvdata (pdev); + + pcap_rtc->rtc =rtc_device_register ("pcap" , &pdev->dev, + &pcap_rtc_ops,THIS_MODULE ); +if (IS_ERR (pcap_rtc->rtc)) { + err =PTR_ERR (pcap_rtc->rtc); + goto fail_rtc; + } + +platform_set_drvdata (pdev, pcap_rtc); + + timer_irq =pcap_to_irq (pcap_rtc->pcap,PCAP_IRQ_1HZ ); + alarm_irq =pcap_to_irq (pcap_rtc->pcap,PCAP_IRQ_TODA ); + + err =request_irq (timer_irq, pcap_rtc_irq,0 ,"RTC Timer" , pcap_rtc); +if (err) + goto fail_timer; + + err =request_irq (alarm_irq, pcap_rtc_irq,0 ,"RTC Alarm" , pcap_rtc); +if (err) + goto fail_alarm; + +return 0 ; +fail_alarm: +free_irq (timer_irq, pcap_rtc); +fail_timer: +rtc_device_unregister (pcap_rtc->rtc); +fail_rtc: +kfree (pcap_rtc); +return err; +} + +static int __devexit pcap_rtc_remove(struct platform_device *pdev) +{ +struct pcap_rtc *pcap_rtc =platform_get_drvdata (pdev); + +free_irq (pcap_to_irq (pcap_rtc->pcap,PCAP_IRQ_1HZ ), pcap_rtc); +free_irq (pcap_to_irq (pcap_rtc->pcap,PCAP_IRQ_TODA ), pcap_rtc); +rtc_device_unregister (pcap_rtc->rtc); +kfree (pcap_rtc); + +return 0 ; +} + +static struct platform_driver pcap_rtc_driver = { + .remove =__devexit_p (pcap_rtc_remove), + .driver = { + .name ="pcap-rtc" , + .owner =THIS_MODULE , + }, +}; + +static int __init rtc_pcap_init (void ) +{ +return platform_driver_probe (&pcap_rtc_driver, pcap_rtc_probe); +} + +static void __exit rtc_pcap_exit(void)
drivers/rtc/rtc-pcap.c
Quoted 10 lines
drivers/rtc/rtc-pcap.c new file +10
-0+{ +platform_driver_unregister (&pcap_rtc_driver); +} + +module_init (rtc_pcap_init); +module_exit (rtc_pcap_exit); + +MODULE_DESCRIPTION ("Motorola pcap rtc driver" ); +MODULE_AUTHOR ("guiming zhuo <[email protected]>" ); +MODULE_LICENSE("GPL");>
It's a nice little driver.
Quoted 3 lines · Andrew Morton
drivers/rtc/rtc-pcap.c
Quoted 3 lines
diff -puN
/dev/nulldrivers/rtc/rtc-pcap.cdrivers/rtc/rtc-pcap.c new file +0
-0
[]
Quoted 16 lines
drivers/rtc/rtc-pcap.c line 39
Quoted 13 lines
drivers/rtc/rtc-pcap.c new file +13
-0+static irqreturn_t pcap_rtc_irq (int irq,void *_pcap_rtc) +{ +struct pcap_rtc *pcap_rtc = _pcap_rtc; +unsigned long rtc_events =0 ; + +if (irq ==pcap_to_irq (pcap_rtc->pcap,PCAP_IRQ_1HZ )) + rtc_events |=RTC_IRQF |RTC_UF ; +else if (irq ==pcap_to_irq (pcap_rtc->pcap,PCAP_IRQ_TODA )) + rtc_events |=RTC_IRQF |RTC_AF ; + +rtc_update_irq (pcap_rtc->rtc,1 , rtc_events); +return IRQ_HANDLED ; +}This could be coded more simply:
Quoted 6 lines
unsigned long rtc_events; if (irq == pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_1HZ)) rtc_events = RTC_IRQF | RTC_UF; else if (irq == pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_TODA)) rtc_events = RTC_IRQF | RTC_AF;
else
rec_events = 0;
Quoted 2 lines
drivers/rtc/rtc-pcap.c line 38
Quoted 2 lines
drivers/rtc/rtc-pcap.c new file +2
-0+rtc_update_irq (pcap_rtc->rtc,1 , rtc_events); +return IRQ_HANDLED ;
Does that buy any clarity?
Hi Andrew,
Em Sex, 2009-06-26 às 13:23 -0700, Andrew Morton escreveu:
Quoted 8 lines
This could be coded more simply:
unsigned long rtc_events; if (irq == pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_1HZ)) rtc_events = RTC_IRQF | RTC_UF; else if (irq == pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_TODA)) rtc_events = RTC_IRQF | RTC_AF;
This would make gcc complain about rtc_events being used uninitialized.
Quoted 13 lines
SEC_PER_DAYis defined ininclude/linux/mfd/ezx-pcap.h. It should not be, because it is not specific to that driver and can be used elsewhere in the kernel.I'd suggest that we
- define
SECS_PER_DAYininclude/linux/time.h- remove the private definitions of
SECS_PER_DAYfromarch/m68k/mac/misc,arch/parisc/include/asm/rtc.h,arch/ia64/hp/sim/boot/fw-emu.c,fs/udf/udftime.c,fs/fat/misc.cand wherever else it appears, make those files use the common definition
Quoted 6 lines
- migrate
rtc-pcap.cfromSEC_PER_DAYover to the commonSECS_PER_DAY.- Then do it all again for
SECS_PER_MINandSECS_PER_HOUR.What a mess.
I can't work on this right now, but i will be happy to reserve some hours for this next month if nobody else does it before.
Quoted 10 lines
"tmp" is a poor identifier. We had an opportunity here to use an identifier which would communicate useful information to the reader. But we blew it and used the information-free "tmp" instead.
Something like
u32
time_of_day; /* In seconds since midnight */would be nice. If that is indeed what the variable contains. How would I know? It's called 'tmp" and is undescribed!
Hum.. I used tmp because the variable is reused and it may be "days since 1/1/1970" or "seconds since today's 00:00:00". I will add some comments to make this clear.
Quoted 4 lines
drivers/rtc/rtc-pcap.c line 114
Quoted 3 lines
drivers/rtc/rtc-pcap.c new file +3
-0+static inline int pcap_rtc_irq_enable (struct device *dev,int pirq, +unsigned int en) +{Inlining this function probably made the code larger and slower.
Right, i will amend this.
I see that you have already added it to the -mm tree. Do you prefer an incremental patch to address your comments or should I send a patch to replace the current version?
Thanks for the review! :)
Signature · 1 line
Daniel Ribeiro
Quoted 5 lines · On Fri, 26 Jun 2009 20:57:38 -0300 Daniel Ribeiro <[email protected]> wrote:
Hi Andrew,
Em Sex, 2009-06-26
__s13:23 -0700, Andrew Morton escreveu:Quoted 2 lines
This could be coded more simply:
Quoted 8 lines
Quoted 6 lines
unsigned long rtc_events; if (irq == pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_1HZ)) rtc_events = RTC_IRQF | RTC_UF; else if (irq == pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_TODA)) rtc_events = RTC_IRQF | RTC_AF;This would make gcc complain about
rtc_eventsbeing used uninitialized.
So initialise it ;)
It's the "|=" which is strange and a bit misleading - it's a coding trick which doesn't reflect what is happening at a functional level.
But it's a minor point.
Quoted 15 lines
Quoted 15 lines
SEC_PER_DAYis defined ininclude/linux/mfd/ezx-pcap.h. It should not be, because it is not specific to that driver and can be used elsewhere in the kernel.I'd suggest that we
- define
SECS_PER_DAYininclude/linux/time.h- remove the private definitions of
SECS_PER_DAYfromarch/m68k/mac/misc,arch/parisc/include/asm/rtc.h,arch/ia64/hp/sim/boot/fw-emu.c,fs/udf/udftime.c,fs/fat/misc.cand wherever else it appears, make those files use the common definition- migrate
rtc-pcap.cfromSEC_PER_DAYover to the commonSECS_PER_DAY.
Quoted 7 lines
Quoted 4 lines
- Then do it all again for
SECS_PER_MINandSECS_PER_HOUR.What a mess.
I can't work on this right now, but i will be happy to reserve some hours for this next month if nobody else does it before.
Well, whatever. Lots of people could pick up this projectlet.
Quoted 6 lines
Quoted 6 lines
"tmp" is a poor identifier. We had an opportunity here to use an identifier which would communicate useful information to the reader. But we blew it and used the information-free "tmp" instead.
Something like
Quoted 7 lines
Quoted 4 lines
u32
time_of_day; /* In seconds since midnight */would be nice. If that is indeed what the variable contains. How would I know? It's called 'tmp" and is undescribed!
Hum.. I used tmp because the variable is reused and it may be "days since 1/1/1970" or "seconds since today's 00:00:00".
That's even worse!
Quoted 1 line
I will add some comments to make this clear.
It'd be clearest to create two appropriately-named variables. This shouldn't affect emitted code unless gcc is busted.
Quoted 1 line
I see that you have already added it to the -mm tree.
Yes, I often do that. To get a bit of early testing and so the whole thing doesn't get lost. Also so that I remember that I've reviewed it once.
Quoted 3 lines
Do you prefer an
incremental patch to address your comments or should I send a patch to replace the current version?
A replacement is OK at this early stage. I will turn that into an incremental here so that I can see what you did.
PATCH v2 1/1 PCAP RTC driver (for 2.6.32)
RTC driver for PCAP2 PMIC.
--- drivers/rtc/Kconfig | 7 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-pcap.c | 224 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 232 insertions(+), 0 deletions(-)
drivers/rtc/Kconfig +7 -0
@@ -759,4 +759,11 @@ config RTC_DRV_PS3 This driver can also be built as a module. If so, the module will be called rtc-ps3. +config RTC_DRV_PCAP + tristate "PCAP RTC" + depends on EZX_PCAP + help + If you say Y here you will get support for the RTC found on + the PCAP2 ASIC used on some Motorola phones. + endif # RTC_CLASS
drivers/rtc/Makefile +1 -0
@@ -52,6 +52,7 @@ obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o +obj-$(CONFIG_RTC_DRV_PCAP) += rtc-pcap.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o
drivers/rtc/rtc-pcap.c new file +224 -0
224 lines not on this page · raw message
Signature · 4 lines
tg: (943d39a..) ezx/pcap_rtc (depends on: ezx/local/pcap) -- Daniel Ribeiro