Add "chip_config" command for PPC4xx bootstrap configuration
PATCH v4 1/1 Add "chip_config" command for PPC4xx bootstrap configuration
This patch adds a generic command for programming I2C bootstrap eeproms on PPC4xx. An implementation for Canyonlands board is included.
The command name is intentionally chosen not to be PPC4xx specific. This way other CPU's/SoC's can implement a similar command under the same name, perhaps with a different syntax.
Usage on Canyonlands:
=> chip_config
Available configurations (I2C address 0x52):
600-nor - NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100 600-nand - NAND CPU: 600 PLB: 200 OPB: 100 EBC: 100 800-nor - NOR CPU: 800 PLB: 200 OPB: 100 EBC: 100 800-nand - NAND CPU: 800 PLB: 200 OPB: 100 EBC: 100 1000-nor - NOR CPU:1000 PLB: 200 OPB: 100 EBC: 100 1000-nand - NAND CPU:1000 PLB: 200 OPB: 100 EBC: 100 1066-nor - NOR CPU:1066 PLB: 266 OPB: 88 EBC: 88 *** 1066-nand - NAND CPU:1066 PLB: 266 OPB: 88 EBC: 88
=> chip_config 600-nor
Using configuration:
600-nor - NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100
done (dump via 'i2c md 52 0.1 10')
Reset the board for the changes to take effect
Other 4xx boards will be migrated to use this command soon as well.
sdfsdf
sdfsdf
---
v4:
- Command name changed from cpu_config to chip_config
- Used eeprom_read/eeprom_write if available
- Added CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET
v3:
- Line length of one printf reduced
v2:
- Patch authorship changes to Stefan
- s-o-b from Dirk added
- Added current configuration detection
- Minor coding style cleanup
board/amcc/canyonlands/Makefile | 5 +- board/amcc/canyonlands/bootstrap.c | 195 ---------------------------------- board/amcc/canyonlands/chip_config.c | 55 ++++++++++ cpu/ppc4xx/Makefile | 3 + cpu/ppc4xx/cmd_chip_config.c | 142 ++++++++++++++++++++++++ include/asm-ppc/ppc4xx_config.h | 42 +++++++ include/configs/canyonlands.h | 6 + 7 files changed, 251 insertions(+), 197 deletions(-) delete mode 100644 board/amcc/canyonlands/bootstrap.c create mode 100644 board/amcc/canyonlands/chip_config.c create mode 100644 cpu/ppc4xx/cmd_chip_config.c create mode 100644 include/asm-ppc/ppc4xx_config.h
board/amcc/canyonlands/Makefile +3 -2
@@ -25,10 +25,11 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o -COBJS += bootstrap.o +COBJS-y := $(BOARD).o +COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o SOBJS := init.o +COBJS := $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS))
board/amcc/canyonlands/bootstrap.c deleted +0 -195
195 lines not on this page · raw message
board/amcc/canyonlands/chip_config.c new file +55 -0
55 lines not on this page · raw message
cpu/ppc4xx/Makefile +3 -0
@@ -41,6 +41,9 @@ endif COBJS += 4xx_pci.o COBJS += 4xx_pcie.o COBJS += bedbug_405.o +ifdef CONFIG_CMD_CHIP_CONFIG +COBJS += cmd_chip_config.o +endif COBJS += commproc.o COBJS += cpu.o COBJS += cpu_init.o
cpu/ppc4xx/cmd_chip_config.c new file +142 -0
142 lines not on this page · raw message
include/asm-ppc/ppc4xx_config.h new file +42 -0
42 lines not on this page · raw message
include/configs/canyonlands.h +6 -0
@@ -330,6 +330,11 @@#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 +/* I2C bootstrap EEPROM */ +#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52 +#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 +#define CONFIG_4xx_CONFIG_BLOCKSIZE 16 +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ #define CONFIG_DTT_LM75 1/* ON Semi's LM75 */ #define CONFIG_DTT_AD7414 1/* use AD7414 */
@@ -442,6 +447,7 @@/* * Commands additional to the ones defined in amcc-common.h */ +#define CONFIG_CMD_CHIP_CONFIG #if defined(CONFIG_ARCHES )#define CONFIG_CMD_DTT #define CONFIG_CMD_PCI
Signature · 1 line
1.6.3.3
PATCH v4 1/1 Add "chip_config" command for PPC4xx bootstrap configuration
<snip>
Quoted 7 lines
Other 4xx boards will be migrated to use this command soon as well.
Signed-off-by Stefan Roese <[email protected]>Signed-off-by Dirk Eibach <[email protected]>Cc Matthias Fuchs <[email protected]>
Quoted 7 lines
sdfsdf
Signed-off-by Stefan Roese <[email protected]>sdfsdf
Signed-off-by Stefan Roese <[email protected]>
Hi Stefan,
Looks like there's some squashed commit remnants above?
Best,
Peter
PATCH v4 1/1 Add "chip_config" command for PPC4xx bootstrap configuration
Quoted 11 lines · On Monday 20 July 2009 07:24:41 Peter Tyser wrote:
<snip>
Quoted 9 lines
Other 4xx boards will be migrated to use this command soon as well.
Signed-off-by Stefan Roese <[email protected]>Signed-off-by Dirk Eibach <[email protected]>Cc Matthias Fuchs <[email protected]>sdfsdf
Quoted 8 lines
Quoted 5 lines
Signed-off-by Stefan Roese <[email protected]>sdfsdf
Signed-off-by Stefan Roese <[email protected]>Hi Stefan,
Looks like there's some squashed commit remnants above?
Ups. Will resend in a short while. Thanks.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================