Skip to contentSkip to conversation

v4l: saa7134: support ir-remote for 10moons TM300

PATCH Nickolay V. Shmyrev 2 participants 2 messages May 11, 2007

lore
Share & tools
lore
#0 lore raw
Quoted 9 lines · Nickolay V. Shmyrev
Quoted 7 lines

Great, now another correction, sorry for not noticing it before. With correction of bit 0x4 -> 0x2 your remote is exactly the same as ir_codes_encore_enltv so probably there is sense just to reuse old codes. Elencore mask should be reduced too. I also wonder aren't we talking about the same card here.

Quoted 3 lines

It's interesting. I checked the source code, but I don't think that Elencore and TM300 is the same card. In fact, they have different tuner modules. Or they use the same ir-remote?

Probably just remote is the same.

#1 lore raw
Quoted 1 line · Nickolay V. Shmyrev

Probably just remote is the same.

Thanks for you correction.
So, if I set the mask_keycode to "0x5f80000", all the key codes of TM300 will be exactly same as Encore's boards. Then the remote will work with a small patch applied.
I'll test it later.