Skip to contentSkip to conversation

Question about big-endian for u-boot

U-Boot patrick_ye at ulinkcom.com 2 participants 2 messages Jul 27, 2009

lore
Share & tools
lore
#0 lore raw

Hi?Dear Sir:

I want to port u-boot to ARM4510 with big-endian, but I failed.

The error shows like this:

/root/usr/local/arm/3.3.2/bin/arm-linux-ld: common/libcommon.a(crc16.o)? compile with little-endian but the target is big-endian.

I have modified CFLAGS and AFLAGS by adding option ?-mbig-endian? and u-boot.lds by modifying OUTPUT-FORMAT. Some C files and assambly files are passed but only some lib failed(just like above).

Would you please give your suggestion? Thank you!

Patrick

#1 lore raw

Dear patrick_ye at ulinkcom.com,

Quoted 8 lines · In message <1248658716$21135$30104770@[email protected]> you wrote:

I want to port u-boot to ARM4510 with big-endian, but I failed.

The error shows like this:

/root/usr/local/arm/3.3.2/bin/arm-linux-ld:
common/libcommon.a(crc16.o)??
compile with little-endian but the target is big-endian.

Either you have misconfigured U-Boot, or your tool chain - or both.

Quoted 7 lines

I have modified CFLAGS and AFLAGS by adding option ??-mbig-endian?? and
u-boot.lds by modifying OUTPUT-FORMAT. Some C files and assambly files are
passed but only some lib failed(just like above).

Would you please give your suggestion? Thank you!

Check what other BE boards are doing...

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The following statement is not true.  The previous statement is true.