rt2x00: rt73usb doesn't receive PS Poll frames in the AP mode
Dear colleagues,
I've discovered that a rt73 usb wi-fi stick in the AP mode doesn't receive PS Poll frames from a station. The station sends a PS Poll frame, but the mac80211 stack doesn't see it.
More details can be found here:
http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=5&t=5486&start=10,
issue #1.
I've found that the FIF_CONTROL flag isn't passed to the rt2x00's configure_filter function (namely rt2x00mac_configure_filter) by the mac80211 stack even if the device is configured as an access point. So, the hardware is configured by the driver to filter out control frames according to the flags given.
And here is my question: what would be the correct behaviour?
A) The mac80211 stack should pass the FIF_CONTROL flag to the driver when the device is configured in the AP mode.
B) The driver should configure the hardware to receive PS Poll frames by itself when the device is configured in the AP mode, even if the FIF_CONTROL flag isn't passed by the mac80211 stack.
Best regards,
Igor Perminov
Quoted 6 lines · Igor Perminov
And here is my question: what would be the correct behaviour?
A) The mac80211 stack should pass theFIF_CONTROLflag to the driver when the device is configured in the AP mode.
B) The driver should configure the hardware to receive PS Poll frames by itself when the device is configured in the AP mode, even if theFIF_CONTROLflag isn't passed by the mac80211 stack.
Hmm. Passing up *all* control frames wouldn't really be good -- think of all the ACK frames. Do you have filters per frame type?
Maybe we should introduce a FIF_PSPOLL flag?
johannes
Quoted 6 lines
Hmm. Passing up *all* control frames wouldn't really be good -- think of all the ACK frames. Do you have filters per frame type?
Maybe we should introduce a
FIF_PSPOLLflag?johannes
As I see from the rt2x00 source code, older Ralink devices have common filter for all control frames. Newer devices (including rt73usb one) can filter ACK/CTS and other control frames separately. And the rt2800 device has a separate filter for PS Poll frames.
I agree, we should filter out the ACK frames where it is possible.
And in case we introduce the FIF_PSPOLL flag, what the exact semantics will it have? When the FIF_CONTROL flag is passed to a driver, but the FIF_PSPOLL one isn't, should the driver filter out PS Poll frames (a) or not (b)?
May be it would be better to take into account the FIF_PSPOLL flag when the FIF_CONTROL one isn't passed only (choice b) to be compatible with the current implementation? I.e. the device should receive PS Poll frames if either FIF_CONTROL or FIF_PSPOLL is passed (or both of them, of course).
Quoted 4 lines · Igor Perminov
And in case we introduce the
FIF_PSPOLLflag, what the exact semantics will it have? When theFIF_CONTROLflag is passed to a driver, but theFIF_PSPOLLone isn't, should the driver filter out PS Poll frames (a) or not (b)?
Like all filter flags, FIF_PSPOLL would mean "give us PSPOLL frames please", so (b).
Quoted 5 lines
May be it would be better to take into account the
FIF_PSPOLLflag when theFIF_CONTROLone isn't passed only (choice b) to be compatible with the current implementation? I.e. the device should receive PS Poll frames if eitherFIF_CONTROLorFIF_PSPOLLis passed (or both of them, of course).
I think it might make more sense to just set FIF_PSPOLL in mac80211 if FIF_CONTROL is being set for some reason.
johannes
Quoted 9 lines · Johannes Berg
Quoted 4 lines · Igor Perminov
And in case we introduce the
FIF_PSPOLLflag, what the exact semantics will it have? When theFIF_CONTROLflag is passed to a driver, but theFIF_PSPOLLone isn't, should the driver filter out PS Poll frames (a) or not (b)?Like all filter flags,
FIF_PSPOLLwould mean "give us PSPOLL frames please", so (b).
And one more question.
How will a driver behave in case a device has no a separate hardware filter for PS Poll frames? I.e. what value should the driver return from configure_filter in total_flags?
In case there is one common filter for all control frames, it's an easy thing. If FIF_CONTROL or FIF_PSPOLL are passed to driver's configure_filter in total_flags, both of them should be set there and the filter should be configured to pass through all control frames.
And suppose a device has two filters: one for ACK frames and one for all other control frames.
Suppose FIF_CONTROL is passed in total_flags only. In that case the driver sets FIF_PSPOLL there and configures both filters to pass through frames. Right?
And what if FIF_PSPOLL is passed in total_flags only? In that case the ACK filter should be configured to filter out ACK frames (otherwise it would have performance overhead at least). And the second filter is configured to pass through frames only (i.e. all control frames except for ACK). So, the driver will receive not only PS Poll control frames, but some others.
The question here is: should the driver set FIF_CONTROL in total_flags or not in that case?
Igor
Quoted 9 lines · Igor Perminov
How will a driver behave in case a device has no a separate hardware filter for PS Poll frames? I.e. what value should the driver return from
configure_filterintotal_flags?In case there is one common filter for all control frames, it's an easy thing. If
FIF_CONTROLorFIF_PSPOLLare passed to driver'sconfigure_filterintotal_flags, both of them should be set there and the filter should be configured to pass through all control frames.
Quoted 13 lines
And suppose a device has two filters: one for ACK frames and one for all other control frames.
SupposeFIF_CONTROLis passed intotal_flagsonly. In that case the driver setsFIF_PSPOLLthere and configures both filters to pass through frames. Right?
And what ifFIF_PSPOLLis passed intotal_flagsonly? In that case the ACK filter should be configured to filter out ACK frames (otherwise it would have performance overhead at least). And the second filter is configured to pass through frames only (i.e. all control frames except for ACK). So, the driver will receive not only PS Poll control frames, but some others.
The question here is: should the driver setFIF_CONTROLintotal_flagsor not in that case?
Huh this is getting complicated.
I think that driver behave as follows:
* PSPOLL: configure control, no-ack, set PSPOLL * CONTROL: configure control, ack, set CONTROL * PSPOLL | CONTROL: configure control, ack, set PSPOLL | CONTROL
Although I guess it could also set PSPOLL to indicate that is being passed. OTOH, I don't think CONTROL by itself makes any sense to pass in, so the second case won't really happen anyway.
johannes