arm: A320: driver for FTMAC100 ethernet controller

From: Po-Yu Chuang <[email protected]>

This patch adds an FTMAC100 ethernet driver for Faraday A320 evaluation board.

---
 drivers/net/Makefile   |    1 +
 drivers/net/ftmac100.c |  278 ++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/ftmac100.h |  154 ++++++++++++++++++++++++++
 include/netdev.h       |    1 +
 4 files changed, 434 insertions(+), 0 deletions(-)
 create mode 100644 drivers/net/ftmac100.c
 create mode 100644 drivers/net/ftmac100.h

index 34b56d8..1c6e402 100644
@@ -39,6 +39,7 @@ COBJS-$(CONFIG_EEPRO100) += eepro100.o
 COBJS-$(CONFIG_ENC28J60) += enc28j60.o
 COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o
 COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
+COBJS-$(CONFIG_FTMAC100) += ftmac100.o
 COBJS-$(CONFIG_GRETH) += greth.o
 COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
 COBJS-$(CONFIG_KIRKWOOD_EGIGA) += kirkwood_egiga.o

index 3e66586..50329a3 100644
@@ -51,6 +51,7 @@ int eepro100_initialize(bd_t *bis);
 int eth_3com_initialize (bd_t * bis);
 int fec_initialize (bd_t *bis);
 int fecmxc_initialize (bd_t *bis);
+int ftmac100_initialize(bd_t *bits);
 int greth_initialize(bd_t *bis);
 void gt6426x_eth_initialize(bd_t *bis);
 int inca_switch_initialize(bd_t *bis);

1.6.3.3

Hello Po-Yu,

Applied to net repo.

thanks,
Ben