Winfast TV USB 2

Good day,

I see the following when I plug in my Winfast TV USB 2 card, can you please assist? The correct card is card 7

Sincerely,

Marc

[ 1162.712014] usb 1-9: new high speed USB device using ehci_hcd and
address 13
[ 1162.844616] usb 1-9: configuration #1 chosen from 1 choice
[ 1162.844693] em28xx: New device @ 480 Mbps (eb1a:2800, interface 0,
class 0)
[ 1162.844784] em28xx #0: em28xx chip ID = 2
[ 1162.996010] em28xx #0: board has no eeprom
[ 1162.996016] em28xx #0: Identified as Unknown EM2800 video grabber
(card=0)
[ 1172.224012] em28xx #0: Your board has no unique USB ID and thus need
a hint to be detected.
[ 1172.224019] em28xx #0: You may try to use card=<n> insmod option to
workaround that.
[ 1172.224021] em28xx #0: Please send an email with this log to:
[ 1172.224024] em28xx #0: 	V4L Mailing List
<[email protected]>
[ 1172.224027] em28xx #0: Board eeprom hash is 0x00000000
[ 1172.224029] em28xx #0: Board i2c devicelist hash is 0x1b800080
[ 1172.224032] em28xx #0: Here is a list of valid choices for the
card=<n> insmod option:
[ 1172.224036] em28xx #0:     card=0 -> Unknown EM2800 video grabber
[ 1172.224038] em28xx #0:     card=1 -> Unknown EM2750/28xx video
grabber
[ 1172.224041] em28xx #0:     card=2 -> Terratec Cinergy 250 USB
[ 1172.224043] em28xx #0:     card=3 -> Pinnacle PCTV USB 2
[ 1172.224046] em28xx #0:     card=4 -> Hauppauge WinTV USB 2
[ 1172.224048] em28xx #0:     card=5 -> MSI VOX USB 2.0
[ 1172.224051] em28xx #0:     card=6 -> Terratec Cinergy 200 USB
[ 1172.224053] em28xx #0:     card=7 -> Leadtek Winfast USB II

Hello Marc,

Do you actually know that the card=7 modprobe option works? The device profile for card 7 has a valid USB ID (0413:6023), suggesting that you might have a different version of the board.

Can you take the unit apart and take some hi-resolution pictures of the PCB? That will tell us whether it is actually the same hardware.

Devin

Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com