Skip to contentSkip to conversation

amcc-common.h: Use filenames from environment variables for update procedure.

PATCH New Detlev Zundel 3 participants 3 messages Sep 2, 2009 – Sep 8, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 amcc-common.h: Use filenames from environment variables for update procedure.

Using a separate "u-boot" environment variable allows to easily specify different filenames for the update procedure. This is also in line with many other board configurations defining an "update" script.

---
 include/configs/amcc-common.h |    8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)
include/configs/amcc-common.h +5 -3
index a2b7ee8..51128a3 100644
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2008
+ * (C) Copyright 2008, 2009
  * Stefan Roese, DENX Software Engineering, sr at denx.de.
  *
  * Common configuration options for all AMCC boards
@@ -271,7 +271,8 @@
 		"bootm ${kernel_addr_r}\0"
 
 #define CONFIG_AMCC_DEF_ENV_NOR_UPD					\
-	"load=tftp 200000 " xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"	\
+	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"			\
+	"load=tftp 200000 ${u-boot}\0"					\
 	"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"	\
 		"era " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"		\
 		"cp.b ${fileaddr} " xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize};" \
@@ -279,7 +280,8 @@
 	"upd=run load update\0"						\
 
 #define CONFIG_AMCC_DEF_ENV_NAND_UPD					\
-	"nload=tftp 200000 " xstr(CONFIG_HOSTNAME) "/u-boot-nand.bin\0"	\
+	"u-boot-nand=" xstr(CONFIG_HOSTNAME) "/u-boot-nand.bin\0"	\
+	"nload=tftp 200000 ${u-boot-nand}\0"				\
 	"nupdate=nand erase 0 100000;nand write 200000 0 100000;"	\
 		"setenv filesize;saveenv\0"				\
 	"nupd=run nload nupdate\0"
Signature · 1 line
1.6.0.6
#1 lore raw

PATCH 1/1 amcc-common.h: Use filenames from environment variables for update procedure.

Dear Detlev Zundel,

Quoted 9 lines · In message <[email protected]> you wrote:

Using a separate "u-boot" environment variable allows to easily specify different filenames for the update procedure. This is also in line with many other board configurations defining an "update" script.

---
 include/configs/amcc-common.h |    8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"One planet is all you get."
Applied
#2 lore raw

PATCH 1/1 amcc-common.h: Use filenames from environment variables for update procedure.

In reply to Detlev Zundel
Quoted 3 lines · On Wednesday 02 September 2009 17:24:57 Detlev Zundel wrote:

Using a separate "u-boot" environment variable allows to easily specify different filenames for the update procedure. This is also in line with many other board configurations defining an "update" script.

Applied to ppc4xx. Thanks.

Cheers,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de