Update scsi.h CDBs and MANAGEMENT_[IN,OUT] defines
PATCH 1/1 Update scsi.h CDBs and MANAGEMENT_[IN,OUT] defines
Hi James,
This patch adds a handful of CDB defines that where missing from include/scsi/scsi.h. I am using these with TCM v3.2 inside of the various CDB exclusion tables listed by SPC-4 for target mode persistent reservations.
It also adds the remaining missing MANAGEMENT_IN and MANAGEMENT_OUT defines, as only the ALUA related MI_REPORT_TARGET_PGS and MO_SET_TARGET_PGS are currently defined in the upstream tree.
Please consider this for v2.6.32.
--nab
include/scsi/scsi.h +24 -0
@@ -106,29 +106,53 @@ struct scsi_cmnd;#define PERSISTENT_RESERVE_OUT 0x5f#define VARIABLE_LENGTH_CMD 0x7f#define REPORT_LUNS 0xa0 +#define SECURITY_PROTOCOL_IN 0xa2#define MAINTENANCE_IN 0xa3#define MAINTENANCE_OUT 0xa4#define MOVE_MEDIUM 0xa5#define EXCHANGE_MEDIUM 0xa6#define READ_12 0xa8#define WRITE_12 0xaa +#define READ_MEDIA_SERIAL_NUMBER 0xab#define WRITE_VERIFY_12 0xae#define SEARCH_HIGH_12 0xb0#define SEARCH_EQUAL_12 0xb1#define SEARCH_LOW_12 0xb2 +#define SECURITY_PROTOCOL_OUT 0xb5#define READ_ELEMENT_STATUS 0xb8#define SEND_VOLUME_TAG 0xb6#define WRITE_LONG_2 0xea +#define EXTENDED_COPY 0x83 +#define RECEIVE_COPY_RESULTS 0x84 +#define ACCESS_CONTROL_IN 0x86 +#define ACCESS_CONTROL_OUT 0x87#define READ_16 0x88#define WRITE_16 0x8a +#define READ_ATTRIBUTE 0x8c +#define WRITE_ATTRIBUTE 0x8d#define VERIFY_16 0x8f#define SERVICE_ACTION_IN 0x9e/* values for service action in */ #define SAI_READ_CAPACITY_16 0x10 +/* values for VARIABLE_LENGTH_CMD service action codes +* see spc4r17 Section D.3.5, table D.7 and D.8 */ +#define VLC_SA_RECEIVE_CREDENTIAL 0x1800/* values for maintenance in */ +#define MI_REPORT_IDENTIFYING_INFORMATION 0x05#define MI_REPORT_TARGET_PGS 0x0a +#define MI_REPORT_ALIASES 0x0b +#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c +#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d +#define MI_REPORT_PRIORITY 0x0e +#define MI_REPORT_TIMESTAMP 0x0f +#define MI_MANAGEMENT_PROTOCOL_IN 0x10/* values for maintenance out */ +#define MO_SET_IDENTIFYING_INFORMATION 0x06#define MO_SET_TARGET_PGS 0x0a +#define MO_CHANGE_ALIASES 0x0b +#define MO_SET_PRIORITY 0x0e +#define MO_SET_TIMESTAMP 0x0f +#define MO_MANAGEMENT_PROTOCOL_OUT 0x10/* Values for T10/04-262r7 */ #define ATA_16 0x85/* 16-byte pass-thru */