Skip to contentSkip to conversation

Incorrectly detected em28xx device

DISCUSSION Matthias Bläsing 2 participants 3 messages Sep 18, 2009 1 message not in the archive Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hello,

when I plugin my usb video grabber, it is misdetected (this email is the reaction to the request in the module output):

Sep 18 20:27:19 prometheus kernel: [15016.458509] em28xx: New device @ 480 Mbps (eb1a:2860, interface 0, class 0)
Sep 18 20:27:19 prometheus kernel: [15016.458516] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
Sep 18 20:27:19 prometheus kernel: [15016.458563] em28xx #0: chip ID is em2860
Sep 18 20:27:19 prometheus kernel: [15016.548934] em28xx #0: board has no eeprom
Sep 18 20:27:19 prometheus kernel: [15016.562331] em28xx #0: found i2c device @ 0x4a [saa7113h]
Sep 18 20:27:19 prometheus kernel: [15016.595202] em28xx #0: Your board has no unique USB ID.
Sep 18 20:27:19 prometheus kernel: [15016.595207] em28xx #0: A hint were successfully done, based on i2c devicelist hash.
Sep 18 20:27:19 prometheus kernel: [15016.595209] em28xx #0: This method is not 100% failproof.
Sep 18 20:27:19 prometheus kernel: [15016.595210] em28xx #0: If the board were missdetected, please email this log to:
Sep 18 20:27:19 prometheus kernel: [15016.595212] em28xx #0: ^IV4L Mailing List  <[email protected]>
Sep 18 20:27:19 prometheus kernel: [15016.595214] em28xx #0: Board detected as PointNix Intra-Oral Camera
Sep 18 20:27:19 prometheus kernel: [15016.595217] em28xx #0: Registering snapshot button...
Sep 18 20:27:19 prometheus kernel: [15016.595289] input: em28xx snapshot button as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.4/input/input19
Sep 18 20:27:20 prometheus kernel: [15016.980420] saa7115 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)
Sep 18 20:27:21 prometheus kernel: [15017.696774] em28xx #0: Config register raw data: 0x00
Sep 18 20:27:21 prometheus kernel: [15017.696777] em28xx #0: No AC97 audio processor
Sep 18 20:27:21 prometheus kernel: [15017.796516] em28xx #0: v4l2 driver version 0.1.2
Sep 18 20:27:21 prometheus kernel: [15018.076600] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0
Sep 18 20:27:21 prometheus kernel: [15018.076630] usbcore: registered new interface driver em28xx
Sep 18 20:27:21 prometheus kernel: [15018.076633] em28xx driver loaded

The correct functionality can be accessed, when explicitly called with card=35 as paramter:

[ 1014.939536] em28xx: New device @ 480 Mbps (eb1a:2860, interface 0, class 0)
[ 1014.939549] em28xx #0: Identified as Typhoon DVD Maker (card=35)
[ 1014.939734] em28xx #0: chip ID is em2860
[ 1015.029084] em28xx #0: board has no eeprom
[ 1015.393031] saa7115 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)
[ 1016.100782] em28xx #0: Config register raw data: 0x00
[ 1016.100789] em28xx #0: No AC97 audio processor
[ 1016.204578] em28xx #0: v4l2 driver version 0.1.2
[ 1016.484275] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0

It would be very nice, if this could be auto-detected. If you need more information, please CC me.

Greetings

Matthias

#1 lore raw

2009/9/18 Matthias Bläsing <[email protected]>:

Quoted 39 lines

Hello,

when I plugin my usb video grabber, it is misdetected (this email is the reaction to the request in the module output):

Sep 18 20:27:19 prometheus kernel: [15016.458509] em28xx: New device @ 480 Mbps (eb1a:2860, interface 0, class 0)
Sep 18 20:27:19 prometheus kernel: [15016.458516] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
Sep 18 20:27:19 prometheus kernel: [15016.458563] em28xx #0: chip ID is em2860
Sep 18 20:27:19 prometheus kernel: [15016.548934] em28xx #0: board has no eeprom
Sep 18 20:27:19 prometheus kernel: [15016.562331] em28xx #0: found i2c device @ 0x4a [saa7113h]
Sep 18 20:27:19 prometheus kernel: [15016.595202] em28xx #0: Your board has no unique USB ID.
Sep 18 20:27:19 prometheus kernel: [15016.595207] em28xx #0: A hint were successfully done, based on i2c devicelist hash.
Sep 18 20:27:19 prometheus kernel: [15016.595209] em28xx #0: This method is not 100% failproof.
Sep 18 20:27:19 prometheus kernel: [15016.595210] em28xx #0: If the board were missdetected, please email this log to:
Sep 18 20:27:19 prometheus kernel: [15016.595212] em28xx #0: ^IV4L Mailing List  <[email protected]>
Sep 18 20:27:19 prometheus kernel: [15016.595214] em28xx #0: Board detected as PointNix Intra-Oral Camera
Sep 18 20:27:19 prometheus kernel: [15016.595217] em28xx #0: Registering snapshot button...
Sep 18 20:27:19 prometheus kernel: [15016.595289] input: em28xx snapshot button as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.4/input/input19
Sep 18 20:27:20 prometheus kernel: [15016.980420] saa7115 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)
Sep 18 20:27:21 prometheus kernel: [15017.696774] em28xx #0: Config register raw data: 0x00
Sep 18 20:27:21 prometheus kernel: [15017.696777] em28xx #0: No AC97 audio processor
Sep 18 20:27:21 prometheus kernel: [15017.796516] em28xx #0: v4l2 driver version 0.1.2
Sep 18 20:27:21 prometheus kernel: [15018.076600] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0
Sep 18 20:27:21 prometheus kernel: [15018.076630] usbcore: registered new interface driver em28xx
Sep 18 20:27:21 prometheus kernel: [15018.076633] em28xx driver loaded

The correct functionality can be accessed, when explicitly called with card=35 as paramter:

[ 1014.939536] em28xx: New device @ 480 Mbps (eb1a:2860, interface 0, class 0)
[ 1014.939549] em28xx #0: Identified as Typhoon DVD Maker (card=35)
[ 1014.939734] em28xx #0: chip ID is em2860
[ 1015.029084] em28xx #0: board has no eeprom
[ 1015.393031] saa7115 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)
[ 1016.100782] em28xx #0: Config register raw data: 0x00
[ 1016.100789] em28xx #0: No AC97 audio processor
[ 1016.204578] em28xx #0: v4l2 driver version 0.1.2
[ 1016.484275] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0
Quoted 5 lines

It would be very nice, if this could be auto-detected. If you need more information, please CC me.

Greetings

Matthias

Hi Matthias,

I fixed this a couple of months ago. Just update to the latest v4l-dvb tree.

Devin

Signature · 2 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
#3 lore raw
In reply to a message not in the archive

2009/9/18 Matthias Bläsing <[email protected]>:

Quoted 30 lines

Hey David,

thanks for this very fast reply.

Am Freitag, den 18.09.2009, 15:01 -0400 schrieb Devin Heitmueller:

Quoted 16 lines

2009/9/18 Matthias Bläsing <[email protected]>:

Quoted 7 lines

Hello,

when I plugin my usb video grabber, it is misdetected (this email is the reaction to the request in the module output):

[Syslog Entries]

The correct functionality can be accessed, when explicitly called with

Quoted 6 lines

card=35 as paramter:

[Syslog Entries]

It would be very nice, if this could be auto-detected. If you need more information, please CC me.

Quoted 7 lines
Quoted 3 lines

Greetings

Matthias

Hi Matthias,

I fixed this a couple of months ago.  Just update to the latest v4l-dvb tree.

Quoted 6 lines

will/was this be merged to the mainline kernel? I'm currently running the ubuntu build of 2.6.30 and am about to switch to 2.6.31.

Thanks for the information so far.

Matthias

It went into v4l-dvb on June 6th, and was submitted upstream to Linus for 2.6.31 on June 16th.

Devin

Signature · 2 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com