saa7134 - ir remote for sinovideo 1300
PATCH 1/1 saa7134 - ir remote for sinovideo 1300
Have a tv tuner believe to be sinovideo 1300, and the remote has h-338 in the back, the tuner is detected as saa7134 proteus 2309, and working fine, the patch is for the remote.
following buttons supposed to be working: all the number button, channel up and down, volumn up and down, off, mute, full screen, recall, snapshot, tv. Some buttons do not have valid entry for tvtime, so I did not map them(record, stop ...)
to apply, use command
modprobe saa7134 card=157
if it does not work, use
modprobe saa7134 card=157 ir_debug=1
and send me(yahoo.com) the output of dmesg(after modprobe and after a button is pressed)
include/media/ir-common.h 2009-07-16 01:37:41.000000000 -0400 renamed from include/media/ir-common.h 2009-07-08 19:28:50.000000000 -0400 +1 -0
@@ -162,6 +162,7 @@ extern IR_KEYTAB_TYPE ir_codes_kworld_plus_tv_analog[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_kaiomy[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_dm1105_nec[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_sinovideo_1300[IR_KEYTAB_SIZE]; #endif /*
drivers/media/common/ir-keymaps.c 2009-07-16 13:17:30.000000000 -0400 renamed from drivers/media/common/ir-keymaps.c 2009-07-08 19:28:49.000000000 -0400 +32 -0
@@ -62,6 +62,38 @@ }; EXPORT_SYMBOL_GPL(ir_codes_proteus_2309); + +IR_KEYTAB_TYPE ir_codes_sinovideo_1300[IR_KEYTAB_SIZE] = { + /* numeric */ + [ 0x00 ] = KEY_0, + [ 0x01 ] = KEY_1, + [ 0x02 ] = KEY_2, + [ 0x03 ] = KEY_3, + [ 0x04 ] = KEY_4, + [ 0x05 ] = KEY_5, + [ 0x06 ] = KEY_6, + [ 0x07 ] = KEY_7, + [ 0x08 ] = KEY_8, + [ 0x09 ] = KEY_9, + + [ 0x5c ] = KEY_POWER, /* power */ + [ 0x20 ] = KEY_F, /* full screen */ + [ 0x0f ] = KEY_BACKSPACE, /* recall */ + [ 0x1b ] = KEY_M, /* mute */ + [ 0x41 ] = KEY_RECORD, /* record */ + [ 0x43 ] = KEY_STOP, /* stop */ + [ 0x16 ] = KEY_S, /* snapshot */ + [ 0x1a ] = KEY_Q, /* off */ + [ 0x2e ] = KEY_RED, + [ 0x1f ] = KEY_DOWN, /* channel - */ + [ 0x1c ] = KEY_UP, /* channel + */ + [ 0x10 ] = KEY_LEFT, /* volume - */ + [ 0x1e ] = KEY_RIGHT, /* volume + */ + [ 0x14 ] = KEY_F1, + [ 0x15 ] = KEY_I, /* tv */ +}; + +EXPORT_SYMBOL_GPL(ir_codes_sinovideo_1300); /* Matt Jesson <[email protected] */ IR_KEYTAB_TYPE ir_codes_avermedia_dvbt[IR_KEYTAB_SIZE] = { [ 0x28 ] = KEY_0, //'0' / 'enter'
drivers/media/video/saa7134/saa7134-cards.c 2009-07-15 22:37:16.000000000 -0400 renamed from drivers/media/video/saa7134/saa7134-cards.c 2009-07-08 19:28:49.000000000 -0400 +38 -0
@@ -4744,6 +4744,37 @@ .gpio = 0x01, }, }, + [SAA7134_BOARD_SINOVIDEO_1300] = { + .name = "Sinovideo 1300", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + .mute = { + .name = name_mute, + .amux = LINE1, + }, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -5838,6 +5869,12 @@ .subvendor = 0x1461, /* Avermedia Technologies Inc */ .subdevice = 0xf31d, .driver_data = SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x0919, + .subdevice = 0x2003, + .driver_data = SAA7134_BOARD_SINOVIDEO_1300, }, { /* --- boards without eeprom + subsystem ID --- */
@@ -6133,6 +6170,7 @@ case SAA7134_BOARD_REAL_ANGEL_220: case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG: case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS: + case SAA7134_BOARD_SINOVIDEO_1300: dev->has_remote = SAA7134_REMOTE_GPIO; break; case SAA7134_BOARD_FLYDVBS_LR300:
drivers/media/video/saa7134/saa7134.h 2009-07-16 15:31:54.000000000 -0400 renamed from drivers/media/video/saa7134/saa7134.h 2009-07-08 19:28:49.000000000 -0400 +1 -0
@@ -280,6 +280,7 @@ #define SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS 154 #define SAA7134_BOARD_HAUPPAUGE_HVR1120 155 #define SAA7134_BOARD_HAUPPAUGE_HVR1110R3 156 +#define SAA7134_BOARD_SINOVIDEO_1300 157 #define SAA7134_MAXBOARDS 32 #define SAA7134_INPUT_MAX 8
drivers/media/video/saa7134/saa7134-input.c 2009-07-16 15:08:50.000000000 -0400 renamed from drivers/media/video/saa7134/saa7134-input.c 2009-03-23 19:12:14.000000000 -0400 +154 -2
189 lines not on this page · raw message