Skip to contentSkip to conversation

ARM Add New Board GEC2410

PATCH New Hui.Tang 3 participants 5 messages Nov 4, 2009 – Nov 18, 2009

Subsystems (2)
lore
Share & tools
lore

Hui.Tang

author
#0 lore raw

PATCH 1/4 ARM Add New Board GEC2410

This patch add a new ARM board GEC2410.
checkpatch.pl shows that all things are fine.

total: 0 errors, 0 warnings, 1268 lines checked

0001-ARM-Add-New-Board-GEC2410.patch has no obvious style problems and is ready for submission.

=========================================================

---
 MAINTAINERS                           |    4 +
 MAKEALL                               |    1 +
 Makefile                              |    7 +
 board/gec/gec2410/Makefile            |   54 ++++++
 board/gec/gec2410/README              |   85 +++++++++
 board/gec/gec2410/config.mk           |   34 ++++
 board/gec/gec2410/gec2410.c           |  313 +++++++++++++++++++++++++++++++++
 board/gec/gec2410/gec2410_mem.h       |  122 +++++++++++++
 board/gec/gec2410/lowlevel_init.S     |   95 ++++++++++
 board/gec/gec2410/u-boot-nand.lds     |   61 +++++++
 cpu/arm920t/s3c24x0/timer.c           |    3 +-
 include/configs/gec2410.h             |  262 +++++++++++++++++++++++++++
 nand_spl/board/gec/gec2410/Makefile   |  103 +++++++++++
 nand_spl/board/gec/gec2410/config.mk  |   40 +++++
 nand_spl/board/gec/gec2410/u-boot.lds |   60 +++++++
 15 files changed, 1243 insertions(+), 1 deletions(-)
 create mode 100644 board/gec/gec2410/Makefile
 create mode 100644 board/gec/gec2410/README
 create mode 100644 board/gec/gec2410/config.mk
 create mode 100644 board/gec/gec2410/gec2410.c
 create mode 100644 board/gec/gec2410/gec2410_mem.h
 create mode 100644 board/gec/gec2410/lowlevel_init.S
 create mode 100644 board/gec/gec2410/u-boot-nand.lds
 create mode 100644 include/configs/gec2410.h
 create mode 100644 nand_spl/board/gec/gec2410/Makefile
 create mode 100644 nand_spl/board/gec/gec2410/config.mk
 create mode 100644 nand_spl/board/gec/gec2410/u-boot.lds
MAINTAINERS +4 -0
index d70a9d2..6ecba41 100644
@@ -429,6 +429,10 @@ Timur Tabi <[email protected]>
 	MPC8349E-mITX	MPC8349
 	MPC8349E-mITX-GP MPC8349
 
+Hui Tang <[email protected]>
+
+	gec2410		ARM920T
+
 Erik Theisen <[email protected]>
 
 	W7OLMC		PPC4xx
MAKEALL +1 -0
index d63c5c2..fffa58a 100755
@@ -548,6 +548,7 @@ LIST_ARM9="			\
 	cp926ejs		\
 	cp946es			\
 	cp966			\
+	gec2410			\
 	imx27lite		\
 	lpd7a400		\
 	mv88f6281gtw_ge		\
Makefile +7 -0
index bcb3fe9..2de0b1d 100644
@@ -2951,6 +2951,13 @@ davinci_dm365evm_config :	unconfig
 davinci_dm6467evm_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
 
+gec2410_config	:	unconfig
+	@mkdir -p $(obj)include $(obj)board/gec/gec2410
+	@mkdir -p $(obj)nand_spl/board/gec/gec2410
+	@echo "RAM_TEXT = 0x33e00000" >> $(obj)board/gec/gec2410/config.tmp
+	@$(MKCONFIG) $(@:_config=) arm arm920t gec2410 gec s3c24x0
+	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
 imx27lite_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
 
board/gec/gec2410/Makefile new file +54 -0

54 lines not on this page · raw message

board/gec/gec2410/README new file +85 -0

85 lines not on this page · raw message

board/gec/gec2410/config.mk new file +34 -0
new file mode 100644
index 0000000..f32ee2e
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <[email protected]>
+# David Mueller, ELSOFT AG, <[email protected]>
+#
+# GuangDong Embedded Software Center GEC2410 board with S3C2410X (ARM920T) cpu
+#
+# see http://www.gd-emb.com/sales_detail/menu-2410.html for more information on GEC2410
+#
+
+#
+# GEC2410 has 1 bank of 64 MB DRAM
+#
+# 3000'0000 to 3400'0000
+#
+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
+# optionally with a ramdisk at 3080'0000
+#
+# we load ourself to 33e0'0000
+#
+# download area is 3300'c000
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef CONFIG_NAND_SPL
+TEXT_BASE = $(RAM_TEXT)
+else
+TEXT_BASE = 0
+endif
+
+LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot-nand.lds
+
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/gec/gec2410
board/gec/gec2410/gec2410.c new file +313 -0

313 lines not on this page · raw message

board/gec/gec2410/gec2410_mem.h new file +122 -0

122 lines not on this page · raw message

board/gec/gec2410/lowlevel_init.S new file +95 -0

95 lines not on this page · raw message

board/gec/gec2410/u-boot-nand.lds new file +61 -0

61 lines not on this page · raw message

cpu/arm920t/s3c24x0/timer.c +2 -1
index 20cedd4..d463a03 100644
@@ -188,7 +188,8 @@ ulong get_tbclk(void)
 	tbclk = timer_load_val * 100;
 #elif defined(CONFIG_SBC2410X) || \
       defined(CONFIG_SMDK2410) || \
-      defined(CONFIG_VCMA9)
+      defined(CONFIG_VCMA9) || \
+      defined(CONFIG_GEC2410)
 	tbclk = CONFIG_SYS_HZ;
 #else
 #	error "tbclk not configured"
include/configs/gec2410.h new file +262 -0

262 lines not on this page · raw message

nand_spl/board/gec/gec2410/Makefile new file +103 -0

103 lines not on this page · raw message

nand_spl/board/gec/gec2410/config.mk new file +40 -0
new file mode 100644
index 0000000..7db7fd1
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2006
+# Stefan Roese, DENX Software Engineering, sr at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# GEC2410 Study Platform (gec2410) board
+
+# TEXT_BASE for SPL:
+#
+# On S3C2410 platforms the SPL is located in SRAM@0.
+#
+TEXT_BASE = 0
+
+include $(TOPDIR)/board/$(BOARDDIR)/config.mk
+
+# PAD_TO used to generate a 4kByte binary needed for the combined image
+# -> PAD_TO = TEXT_BASE + 4096
+PAD_TO	:= 0x00001000
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
nand_spl/board/gec/gec2410/u-boot.lds new file +60 -0

60 lines not on this page · raw message

Signature · 1 line
1.6.0.4
#1 lore raw

PATCH 1/4 ARM Add New Board GEC2410

Dear Hui Tang,

2009/11/4 Hui.Tang <[email protected]>:

Quoted 6 lines

This patch add a new ARM board GEC2410.
checkpatch.pl shows that all things are fine.

total: 0 errors, 0 warnings, 1268 lines checked

0001-ARM-Add-New-Board-GEC2410.patch has no obvious style problems and is ready for submission.

please move this checkpatch msg to under the "---" line.

Quoted 297 lines

=========================================================

---

?MAINTAINERS ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?4 +
?MAKEALL ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
?Makefile ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?7 +
?board/gec/gec2410/Makefile ? ? ? ? ? ?| ? 54 ++++++
?board/gec/gec2410/README ? ? ? ? ? ? ?| ? 85 +++++++++
?board/gec/gec2410/config.mk ? ? ? ? ? | ? 34 ++++
?board/gec/gec2410/gec2410.c ? ? ? ? ? | ?313 +++++++++++++++++++++++++++++++++
?board/gec/gec2410/gec2410_mem.h ? ? ? | ?122 +++++++++++++
?board/gec/gec2410/lowlevel_init.S ? ? | ? 95 ++++++++++
?board/gec/gec2410/u-boot-nand.lds ? ? | ? 61 +++++++
?cpu/arm920t/s3c24x0/timer.c ? ? ? ? ? | ? ?3 +-
?include/configs/gec2410.h ? ? ? ? ? ? | ?262 +++++++++++++++++++++++++++
?nand_spl/board/gec/gec2410/Makefile ? | ?103 +++++++++++
?nand_spl/board/gec/gec2410/config.mk ?| ? 40 +++++
?nand_spl/board/gec/gec2410/u-boot.lds | ? 60 +++++++

?15 files changed, 1243 insertions(+), 1 deletions(-) ?create mode 100644 board/gec/gec2410/Makefile ?create mode 100644 board/gec/gec2410/README ?create mode 100644 board/gec/gec2410/config.mk ?create mode 100644 board/gec/gec2410/gec2410.c ?create mode 100644 board/gec/gec2410/gec2410_mem.h ?create mode 100644 board/gec/gec2410/lowlevel_init.S ?create mode 100644 board/gec/gec2410/u-boot-nand.lds ?create mode 100644 include/configs/gec2410.h ?create mode 100644 nand_spl/board/gec/gec2410/Makefile ?create mode 100644 nand_spl/board/gec/gec2410/config.mk ?create mode 100644 nand_spl/board/gec/gec2410/u-boot.lds

MAINTAINERS +0 -0
index d70a9d2..6ecba41 100644
@@ -429,6 +429,10 @@ Timur Tabi <[email protected]>

? ? ? ?MPC8349E-mITX ? MPC8349
? ? ? ?MPC8349E-mITX-GP MPC8349

MAINTAINERS +4 -0
+Hui Tang <[email protected]>
+
+ ? ? ? gec2410 ? ? ? ? ARM920T
+

?Erik Theisen <[email protected]>

? ? ? ?W7OLMC ? ? ? ? ?PPC4xx

MAKEALL +1 -0
index d63c5c2..fffa58a 100755
@@ -548,6 +548,7 @@ LIST_ARM9=" ? ? ? ? ? ? ? ? \
 ? ? ? ?cp926ejs ? ? ? ? ? ? ? ?\
 ? ? ? ?cp946es ? ? ? ? ? ? ? ? \
 ? ? ? ?cp966 ? ? ? ? ? ? ? ? ? \
+ ? ? ? gec2410 ? ? ? ? ? ? ? ? \
 ? ? ? ?imx27lite ? ? ? ? ? ? ? \
 ? ? ? ?lpd7a400 ? ? ? ? ? ? ? ?\
 ? ? ? ?mv88f6281gtw_ge ? ? ? ? \
Makefile +0 -0
index bcb3fe9..2de0b1d 100644
@@ -2951,6 +2951,13 @@ davinci_dm365evm_config : ? ? ? ?unconfig

?davinci_dm6467evm_config : ? ? unconfig
? ? ? ?@$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci

Makefile +7 -0
+gec2410_config : ? ? ? unconfig
+ ? ? ? @mkdir -p $(obj)include $(obj)board/gec/gec2410
+ ? ? ? @mkdir -p $(obj)nand_spl/board/gec/gec2410
+ ? ? ? @echo "RAM_TEXT = 0x33e00000" >> $(obj)board/gec/gec2410/config.tmp
+ ? ? ? @$(MKCONFIG) $(@:_config=) arm arm920t gec2410 gec s3c24x0
+ ? ? ? @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+

?imx27lite_config: ? ? ?unconfig
? ? ? ?@$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27

board/gec/gec2410/Makefile new file +54 -0
new file mode 100644
index 0000000..052f600
@@ -0,0 +1,54 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2009
+# Hui Tang <[email protected]>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB ? ?= $(obj)lib$(BOARD).a
+
+COBJS ?:= gec2410.o
+SOBJS ?:= lowlevel_init.o
+
+SRCS ? := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS ? := $(addprefix $(obj),$(COBJS))
+SOBJS ?:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB): ? ? ? ?$(obj).depend $(OBJS) $(SOBJS)
+ ? ? ? $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ ? ? ? rm -f $(SOBJS) $(OBJS)
+
+distclean: ? ? clean
+ ? ? ? rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
board/gec/gec2410/README new file +85 -0
new file mode 100644
index 0000000..952aae8
@@ -0,0 +1,85 @@
+U-Boot for GEC2410
+
+------------------------------------------------
+The supported features of the GEC2410 board are:
+ ? ?CPU (Samsung S3C2410 SoC)
+ ? ?SDRAM (64 MB , 2 pcs K4S561632, 32 bit)
+ ? ?NAND FLASH (64MB , 1 pcs K9F1208)
+ ? ?NOR FLASH (only on rev1.1 board, 2MB , 1 pcs SST39VF1601)
+ ? ?ETHERNET (10M , 1 pcs CS8900)
+
+
+------------------------------------------------
+Memory Map from CPU point of view:
+
+for NAND FLASH boot:
+ ? ?Start ? ? ? Size ? Access to
+ ? ?-----------------------------------------------------
+ ? ?0x00000000 ?64MB ? NAND FLASH (first 4K SRAM for stepptingstone)
+ ? ?0x19000300 ? ? ? ? CS8900 I/O base
+ ? ?0x30000000 ?64MB ? SDRAM
+ ? ?0x48000000 ?128MB ?Special Function Registers Area
+
+
+for NOR FLASH boot:
+ ? ?Start ? ? ? Size ? Access to
+ ? ?-----------------------------------------------------
+ ? ?0x00000000 ?2MB ? ?NOR FLASH
+ ? ?0x19000300 ? ? ? ? CS8900 I/O base
+ ? ?0x30000000 ?64MB ? SDRAM
+ ? ?0x40000000 ?4KB ? ?BootSRAM
+ ? ?0x48000000 ?128MB ?Special Function Registers Area
+
+
+------------------------------------------------
+Setting the board Jumpers & Switches:
+
+ ? In order to get the board running with the default configuration the
+ ? jumpers need to be set as follows:
+
+ ?Core board Jumpers:
+ ? JP1 close ? (Set boot mode, close for booting from NAND FLASH,
+ ? ? ? ? ? ? ? ?otherwise from NOR FLASH)
+
+ ?Main board Jumpers:
+ ? J1 ? ? ? ? ?close ? (Set beep, close for enabling beep, or disabling beep)
+ ? J18 ? ? ? ? 1-2 ? ? (1-2 set RXD2 as UART; 2-3 set RXD2 as IrDA)
+ ? J9,J10 ? ? ?2-3 ? ? (1-2 set USB HOST 1 to Host mode;
+ ? ? ? ? ? ? ? ? ? ? ? ?2-3 set USB HOST 1 to Device mode)
+ ? J13 ? ? ? ? 1-2 ? ? (1-2 set LCD working power to 5V;
+ ? ? ? ? ? ? ? ? ? ? ? ?2-3 set LCD working power to 3.3V)
+
+ ?Core board Switches:
+ ? S1 ? ? ? ? ?open ? ?(Reset button)
+
+ ?Main board Switches:
+ ? K1~K16 ? ? ?open ? ?(4x4 keyboard)
+
+
+------------------------------------------------
+LED & Connector Interfaces:
+
+ ?Core board LEDs:
+ ? D1,D2 ? ? ? I/O port
+ ? D3 ? ? ? ? ?PWREN pin LED
+ ? D4 ? ? ? ? ?Core board power
+
+ ?Main board LEDs:
+ ? D1~D4 ? ? ? GPIO
+ ? D5,D6 ? ? ? Ethernet
+ ? D11 ? ? ? ? Main board power
+
+ ?Core board Connector Interfaces:
+ ? J1 ? ? ? ? ?JTAG (20 pins)
+
+ ?Main board Connector Interfaces:
+ ? RJ1 ? ? ? ? Ethernet (RJ45)
+ ? J2 ? ? ? ? ?Audio In
+ ? J3 ? ? ? ? ?Audio Out
+ ? J4 ? ? ? ? ?Serial Port 1
+ ? J5 ? ? ? ? ?Serial Port 2
+ ? U4 ? ? ? ? ?IrDA Port
+ ? J7 ? ? ? ? ?USB HOST 0
+ ? J9 ? ? ? ? ?USB HOST 1 / USB DEVICE
+ ? J11 ? ? ? ? USB DEVICE
+ ? J20 ? ? ? ? GPIO Pins
board/gec/gec2410/config.mk new file +34 -0
new file mode 100644
index 0000000..f32ee2e
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <[email protected]>
+# David Mueller, ELSOFT AG, <[email protected]>
+#
+# GuangDong Embedded Software Center GEC2410 board with S3C2410X (ARM920T) cpu
+#
+# see http://www.gd-emb.com/sales_detail/menu-2410.html for more information on GEC2410
+#
+
+#
+# GEC2410 has 1 bank of 64 MB DRAM
+#
+# 3000'0000 to 3400'0000
+#
+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
+# optionally with a ramdisk at 3080'0000
+#
+# we load ourself to 33e0'0000
+#
+# download area is 3300'c000
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef CONFIG_NAND_SPL
+TEXT_BASE = $(RAM_TEXT)
+else
+TEXT_BASE = 0
+endif
+
+LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot-nand.lds
+
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/gec/gec2410
board/gec/gec2410/gec2410.c new file +23 -0
new file mode 100644
index 0000000..a9b6290
@@ -0,0 +1,313 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <[email protected]>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <[email protected]>
+ *
+ * (C) Copyright 2009
+ * Hui Tang, <[email protected]>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
+ * GNU General Public License for more details.

board/gec/gec2410/gec2410.c line 33

Quoted 10 lines
board/gec/gec2410/gec2410.c new file +10 -0
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <s3c2410.h>

s3c2410.h is moved to include/asm-arm/arch-s3c24x0/ please fix it to #include <asm/arch/s3c2410.h>

Quoted 244 lines
board/gec/gec2410/gec2410.c new file +244 -0
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define FCLK_SPEED 1
+
+#if FCLK_SPEED == 0 ? ? ? ? ? ?/* Fout = 203MHz, Fin = 12MHz for Audio */
+#define M_MDIV 0xC3
+#define M_PDIV 0x4
+#define M_SDIV 0x1
+#elif FCLK_SPEED == 1 ? ? ? ? ?/* Fout = 202.8MHz */
+#define M_MDIV 0xA1
+#define M_PDIV 0x3
+#define M_SDIV 0x1
+#endif
+
+#define USB_CLOCK 1
+
+#if USB_CLOCK == 0
+#define U_M_MDIV ? ? ? 0xA1
+#define U_M_PDIV ? ? ? 0x3
+#define U_M_SDIV ? ? ? 0x1
+#elif USB_CLOCK == 1
+#define U_M_MDIV ? ? ? 0x48
+#define U_M_PDIV ? ? ? 0x3
+#define U_M_SDIV ? ? ? 0x2
+#endif
+
+static inline void delay(unsigned long loops)
+{
+ ? ? ? __asm__ volatile ("1:\n"
+ ? ? ? ? "subs %0, %1, #1\n"
+ ? ? ? ? "bne 1b" : "=r" (loops) : "0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init(void)
+{
+ ? ? ? struct s3c24x0_clock_power * const clk_power =
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? s3c24x0_get_base_clock_power();
+ ? ? ? struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+
+ ? ? ? /* to reduce PLL lock time, adjust the LOCKTIME register */
+ ? ? ? writel(0xFFFFFF, &clk_power->LOCKTIME);
+
+ ? ? ? /* configure MPLL */
+ ? ? ? writel(((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV), &clk_power->MPLLCON);
+
+ ? ? ? /* some delay between MPLL and UPLL */
+ ? ? ? delay(4000);
+
+ ? ? ? /* configure UPLL */
+ ? ? ? writel(((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV),
+ ? ? ? ? ? ? ? &clk_power->UPLLCON);
+
+ ? ? ? /* some delay between MPLL and UPLL */
+ ? ? ? delay(8000);
+
+ ? ? ? /* set up the I/O ports */
+ ? ? ? /* configure GPA port */
+ ? ? ? /*====================================*
+ ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE *
+ ? ? ? ?*====================================*
+ ? ? ? ?* GPA22 ? ? ? ?nFCE ? ? ? ? ? ?1
+ ? ? ? ?* GPA21 ? ? ? ?nRSTOUT ? ? ? ? 1
+ ? ? ? ?* GPA20 ? ? ? ?nFRE ? ? ? ? ? ?1
+ ? ? ? ?* GPA19 ? ? ? ?nFWE ? ? ? ? ? ?1
+ ? ? ? ?* GPA18 ? ? ? ?ALE ? ? ? ? ? ? 1
+ ? ? ? ?* GPA17 ? ? ? ?CLE ? ? ? ? ? ? 1
+ ? ? ? ?* GPA16 ? ? ? ?nGCS5 ? ? ? ? ? 1
+ ? ? ? ?* GPA15 ? ? ? ?nGCS4 ? ? ? ? ? 1
+ ? ? ? ?* GPA14 ? ? ? ?nGCS3 ? ? ? ? ? 1
+ ? ? ? ?* GPA13 ? ? ? ?nGCS2 ? ? ? ? ? 1
+ ? ? ? ?* GPA12 ? ? ? ?nGCS1 ? ? ? ? ? 1
+ ? ? ? ?* GPA11 ? ? ? ?ADDR26 ? ? ? ? ?1
+ ? ? ? ?* GPA10 ? ? ? ?ADDR25 ? ? ? ? ?1
+ ? ? ? ?* GPA9 ? ? ? ? ADDR24 ? ? ? ? ?1
+ ? ? ? ?* GPA8 ? ? ? ? ADDR23 ? ? ? ? ?1
+ ? ? ? ?* GPA7 ? ? ? ? ADDR22 ? ? ? ? ?1
+ ? ? ? ?* GPA6 ? ? ? ? ADDR21 ? ? ? ? ?1
+ ? ? ? ?* GPA5 ? ? ? ? ADDR20 ? ? ? ? ?1
+ ? ? ? ?* GPA4 ? ? ? ? ADDR19 ? ? ? ? ?1
+ ? ? ? ?* GPA3 ? ? ? ? ADDR18 ? ? ? ? ?1
+ ? ? ? ?* GPA2 ? ? ? ? ADDR17 ? ? ? ? ?1
+ ? ? ? ?* GPA1 ? ? ? ? ADDR16 ? ? ? ? ?1
+ ? ? ? ?* GPA0 ? ? ? ? ADDR0 ? ? ? ? ? 1
+ ? ? ? ?*====================================*/
+ ? ? ? writel(0x007FFFFF, &gpio->GPACON);
+
+ ? ? ? /* configure GPB port */
+ ? ? ? /*====================================*
+ ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE *
+ ? ? ? ?*====================================*
+ ? ? ? ?* GPB10 ? ? ? ?Input ? ? ? ? ? 00
+ ? ? ? ?* GPB9 ? ? ? ? Output ? ? ? ? ?01
+ ? ? ? ?* GPB8 ? ? ? ? Input ? ? ? ? ? 00
+ ? ? ? ?* GPB7 ? ? ? ? Output ? ? ? ? ?01
+ ? ? ? ?* GPB6 ? ? ? ? Input ? ? ? ? ? 00
+ ? ? ? ?* GPB5 ? ? ? ? Output ? ? ? ? ?01
+ ? ? ? ?* GPB4 ? ? ? ? Output ? ? ? ? ?01
+ ? ? ? ?* GPB3 ? ? ? ? Output ? ? ? ? ?01
+ ? ? ? ?* GPB2 ? ? ? ? Output ? ? ? ? ?01
+ ? ? ? ?* GPB1 ? ? ? ? Output ? ? ? ? ?01
+ ? ? ? ?* GPB0 ? ? ? ? Output ? ? ? ? ?01
+ ? ? ? ?*====================================*/
+ ? ? ? writel(0x00044555, &gpio->GPBCON);
+ ? ? ? /* disable all pull-up register */
+ ? ? ? writel(0x000007FF, &gpio->GPBUP);
+
+ ? ? ? /* configure GPC port */
+ ? ? ? /*====================================*
+ ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE *
+ ? ? ? ?*====================================*
+ ? ? ? ?* GPC15 ? ? ? ?VD7 ? ? ? ? ? ? 10
+ ? ? ? ?* GPC14 ? ? ? ?VD6 ? ? ? ? ? ? 10
+ ? ? ? ?* GPC13 ? ? ? ?VD5 ? ? ? ? ? ? 10
+ ? ? ? ?* GPC12 ? ? ? ?VD4 ? ? ? ? ? ? 10
+ ? ? ? ?* GPC11 ? ? ? ?VD3 ? ? ? ? ? ? 10
+ ? ? ? ?* GPC10 ? ? ? ?VD2 ? ? ? ? ? ? 10
+ ? ? ? ?* GPC9 ? ? ? ? VD1 ? ? ? ? ? ? 10
+ ? ? ? ?* GPC8 ? ? ? ? VD0 ? ? ? ? ? ? 10
+ ? ? ? ?* GPC7 ? ? ? ? LCDVF2 ? ? ? ? ?10
+ ? ? ? ?* GPC6 ? ? ? ? LCDVF1 ? ? ? ? ?10
+ ? ? ? ?* GPC5 ? ? ? ? LCDVF0 ? ? ? ? ?10
+ ? ? ? ?* GPC4 ? ? ? ? VM ? ? ? ? ? ? ?10
+ ? ? ? ?* GPC3 ? ? ? ? VFRAME ? ? ? ? ?10
+ ? ? ? ?* GPC2 ? ? ? ? VLINE ? ? ? ? ? 10
+ ? ? ? ?* GPC1 ? ? ? ? VCLK ? ? ? ? ? ?10
+ ? ? ? ?* GPC0 ? ? ? ? LEND ? ? ? ? ? ?10
+ ? ? ? ?*====================================*/
+ ? ? ? writel(0xAAAAAAAA, &gpio->GPCCON);
+ ? ? ? /* disable all pull-up register */
+ ? ? ? writel(0x0000FFFF, &gpio->GPCUP);
+
+ ? ? ? /* configure GPD port */
+ ? ? ? /*====================================*
+ ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE *
+ ? ? ? ?*====================================*
+ ? ? ? ?* GPD15 ? ? ? ?VD23 ? ? ? ? ? ?10
+ ? ? ? ?* GPD14 ? ? ? ?VD22 ? ? ? ? ? ?10
+ ? ? ? ?* GPD13 ? ? ? ?VD21 ? ? ? ? ? ?10
+ ? ? ? ?* GPD12 ? ? ? ?VD20 ? ? ? ? ? ?10
+ ? ? ? ?* GPD11 ? ? ? ?VD19 ? ? ? ? ? ?10
+ ? ? ? ?* GPD10 ? ? ? ?VD18 ? ? ? ? ? ?10
+ ? ? ? ?* GPD9 ? ? ? ? VD17 ? ? ? ? ? ?10
+ ? ? ? ?* GPD8 ? ? ? ? VD16 ? ? ? ? ? ?10
+ ? ? ? ?* GPD7 ? ? ? ? VD15 ? ? ? ? ? ?10
+ ? ? ? ?* GPD6 ? ? ? ? VD14 ? ? ? ? ? ?10
+ ? ? ? ?* GPD5 ? ? ? ? VD13 ? ? ? ? ? ?10
+ ? ? ? ?* GPD4 ? ? ? ? VD12 ? ? ? ? ? ?10
+ ? ? ? ?* GPD3 ? ? ? ? VD11 ? ? ? ? ? ?10
+ ? ? ? ?* GPD2 ? ? ? ? VD10 ? ? ? ? ? ?10
+ ? ? ? ?* GPD1 ? ? ? ? VD9 ? ? ? ? ? ? 10
+ ? ? ? ?* GPD0 ? ? ? ? VD8 ? ? ? ? ? ? 10
+ ? ? ? ?*====================================*/
+ ? ? ? writel(0xAAAAAAAA, &gpio->GPDCON);
+ ? ? ? /* disable all pull-up register */
+ ? ? ? writel(0x0000FFFF, &gpio->GPDUP);
+
+ ? ? ? /* configure GPE port */
+ ? ? ? /*====================================*
+ ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE *
+ ? ? ? ?*====================================*
+ ? ? ? ?* GPE15 ? ? ? ?IICSDA ? ? ? ? ?10
+ ? ? ? ?* GPE14 ? ? ? ?IICSCL ? ? ? ? ?10
+ ? ? ? ?* GPE13 ? ? ? ?SPICLK0 ? ? ? ? 10
+ ? ? ? ?* GPE12 ? ? ? ?SPIMOSIO ? ? ? ?10
+ ? ? ? ?* GPE11 ? ? ? ?SPIMISOO ? ? ? ?10
+ ? ? ? ?* GPE10 ? ? ? ?SDDAT3 ? ? ? ? ?10
+ ? ? ? ?* GPE9 ? ? ? ? SDDAT2 ? ? ? ? ?10
+ ? ? ? ?* GPE8 ? ? ? ? SDDAT1 ? ? ? ? ?10
+ ? ? ? ?* GPE7 ? ? ? ? SDDAT0 ? ? ? ? ?10
+ ? ? ? ?* GPE6 ? ? ? ? SDCMD ? ? ? ? ? 10
+ ? ? ? ?* GPE5 ? ? ? ? SDCLK ? ? ? ? ? 10
+ ? ? ? ?* GPE4 ? ? ? ? I2SSDO ? ? ? ? ?10
+ ? ? ? ?* GPE3 ? ? ? ? I2SSDI ? ? ? ? ?10
+ ? ? ? ?* GPE2 ? ? ? ? CDCLK ? ? ? ? ? 10
+ ? ? ? ?* GPE1 ? ? ? ? I2SSCLK ? ? ? ? 10
+ ? ? ? ?* GPE0 ? ? ? ? I2SLRCK ? ? ? ? 10
+ ? ? ? ?*====================================*/
+ ? ? ? writel(0xAAAAAAAA, &gpio->GPECON);
+ ? ? ? /* disable all pull-up register */
+ ? ? ? writel(0x0000FFFF, &gpio->GPEUP);
+
+ ? ? ? /* configure GPF port */
+ ? ? ? /*====================================*
+ ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE *
+ ? ? ? ?*====================================*
+ ? ? ? ?* GPF7 ? ? ? ? Output ? ? ? ? ?01
+ ? ? ? ?* GPF6 ? ? ? ? Output ? ? ? ? ?01
+ ? ? ? ?* GPF5 ? ? ? ? Output ? ? ? ? ?01
+ ? ? ? ?* GPF4 ? ? ? ? Output ? ? ? ? ?01
+ ? ? ? ?* GPF3 ? ? ? ? EINT3 ? ? ? ? ? 10
+ ? ? ? ?* GPF2 ? ? ? ? EINT2 ? ? ? ? ? 10
+ ? ? ? ?* GPF1 ? ? ? ? EINT1 ? ? ? ? ? 10
+ ? ? ? ?* GPF0 ? ? ? ? EINT0 ? ? ? ? ? 10
+ ? ? ? ?*====================================*/
+ ? ? ? writel(0x000055AA, &gpio->GPFCON);
+ ? ? ? /* disable all pull-up register */
+ ? ? ? writel(0x000000FF, &gpio->GPFUP);
+
+ ? ? ? /* configure GPG port */
+ ? ? ? /*====================================*
+ ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE *
+ ? ? ? ?*====================================*
+ ? ? ? ?* GPG15 ? ? ? ?nYPON ? ? ? ? ? 11
+ ? ? ? ?* GPG14 ? ? ? ?YMON ? ? ? ? ? ?11
+ ? ? ? ?* GPG13 ? ? ? ?nXPON ? ? ? ? ? 11
+ ? ? ? ?* GPG12 ? ? ? ?XMON ? ? ? ? ? ?11
+ ? ? ? ?* GPG11 ? ? ? ?EINT19 ? ? ? ? ?10
+ ? ? ? ?* GPG10 ? ? ? ?Output ? ? ? ? ?01
+ ? ? ? ?* GPG9 ? ? ? ? Output ? ? ? ? ?01
+ ? ? ? ?* GPG8 ? ? ? ? Output ? ? ? ? ?01
+ ? ? ? ?* GPG7 ? ? ? ? SPICLK1 ? ? ? ? 11
+ ? ? ? ?* GPG6 ? ? ? ? SPIMOSI1 ? ? ? ?11
+ ? ? ? ?* GPG5 ? ? ? ? SPIMISO1 ? ? ? ?11
+ ? ? ? ?* GPG4 ? ? ? ? LCD_PWREN ? ? ? 11
+ ? ? ? ?* GPG3 ? ? ? ? EINT11 ? ? ? ? ?10
+ ? ? ? ?* GPG2 ? ? ? ? nSS0 ? ? ? ? ? ?11
+ ? ? ? ?* GPG1 ? ? ? ? EINT9 ? ? ? ? ? 10
+ ? ? ? ?* GPG0 ? ? ? ? EINT8 ? ? ? ? ? 10
+ ? ? ? ?*====================================*/
+ ? ? ? writel(0xFF95FFBA, &gpio->GPGCON);
+ ? ? ? /* disable all pull-up register */
+ ? ? ? writel(0x0000FFFF, &gpio->GPGUP);
+
+ ? ? ? /* configure GPH port */
+ ? ? ? /*====================================*
+ ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE *
+ ? ? ? ?*====================================*
+ ? ? ? ?* GPH10 ? ? ? ?CLKOUT1 ? ? ? ? 10
+ ? ? ? ?* GPH9 ? ? ? ? CLKOUT0 ? ? ? ? 10
+ ? ? ? ?* GPH8 ? ? ? ? UEXTCLK ? ? ? ? 10
+ ? ? ? ?* GPH7 ? ? ? ? nCTS1 ? ? ? ? ? 11
+ ? ? ? ?* GPH6 ? ? ? ? nRTS1 ? ? ? ? ? 11
+ ? ? ? ?* GPH5 ? ? ? ? RXD1 ? ? ? ? ? ?10
+ ? ? ? ?* GPH4 ? ? ? ? TXD1 ? ? ? ? ? ?10
+ ? ? ? ?* GPH3 ? ? ? ? RXD0 ? ? ? ? ? ?10
+ ? ? ? ?* GPH2 ? ? ? ? TXD0 ? ? ? ? ? ?10
+ ? ? ? ?* GPH1 ? ? ? ? nRTS0 ? ? ? ? ? 10
+ ? ? ? ?* GPH0 ? ? ? ? nCTS0 ? ? ? ? ? 10

board/gec/gec2410/gec2410.c line 287

Quoted 10 lines
board/gec/gec2410/gec2410.c new file +10 -0
+ ? ? ? ?*====================================*/
+ ? ? ? writel(0x002AFAAA, &gpio->GPHCON);
+ ? ? ? /* disable all pull-up register */
+ ? ? ? writel(0x000007FF, &gpio->GPHUP);
+
+ ? ? ? /* arch number of GEC2410-Board */
+ ? ? ? gd->bd->bi_arch_number = MACH_TYPE_GEC2410;
+
+ ? ? ? /* adress of boot parameters */
+ ? ? ? gd->bd->bi_boot_params = 0x30000100;

PHYS_SDRAM_1 + 0x100;

Quoted 60 lines
board/gec/gec2410/gec2410.c new file +26 -0
+
+ ? ? ? icache_enable();
+ ? ? ? dcache_enable();
+
+ ? ? ? return 0;
+}
+
+int dram_init(void)
+{
+ ? ? ? gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ ? ? ? gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? PHYS_SDRAM_1_SIZE);
+
+ ? ? ? return 0;
+}
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+ ? ? ? int rc = 0;
+#ifdef CONFIG_CS8900
+ ? ? ? rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
+#endif
+ ? ? ? return rc;
+}
+#endif
board/gec/gec2410/gec2410_mem.h new file +28 -0
new file mode 100644
index 0000000..911b34b
@@ -0,0 +1,122 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
+ * ? ? ? ? ? ? ? ? ? ? Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
+ *
+ * Modified for the Samsung SMDK2410 by
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <[email protected]>
+ *
+ * Copyright (C) 2009 Hui Tang <[email protected]>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,

board/gec/gec2410/gec2410_mem.h line 38

Quoted 10 lines
board/gec/gec2410/gec2410_mem.h new file +10 -0
+ * MA 02111-1307 USA
+ */
+
+/*
+ *
+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
+ *
+ * Copyright (C) 2002 Samsung Electronics SW.LEE ?<[email protected]>
+ *
+ */

please move to copyright section

Quoted 111 lines
board/gec/gec2410/gec2410_mem.h new file +84 -0
+
+#define BWSCON 0x48000000
+
+/* BWSCON */
+#define DW8 ? ? ? ? ? ? ? ? ? ?(0x0)
+#define DW16 ? ? ? ? ? ? ? ? ? (0x1)
+#define DW32 ? ? ? ? ? ? ? ? ? (0x2)
+#define WAIT ? ? ? ? ? ? ? ? ? (0x1<<2)
+#define UBLB ? ? ? ? ? ? ? ? ? (0x1<<3)
+
+#define B1_BWSCON ? ? ? ? ? ? ?(DW32)
+#define B2_BWSCON ? ? ? ? ? ? ?(DW16)
+#define B3_BWSCON ? ? ? ? ? ? ?(DW16 + WAIT + UBLB)
+#define B4_BWSCON ? ? ? ? ? ? ?(DW16)
+#define B5_BWSCON ? ? ? ? ? ? ?(DW16)
+#define B6_BWSCON ? ? ? ? ? ? ?(DW32)
+#define B7_BWSCON ? ? ? ? ? ? ?(DW32)
+
+/* BANK0CON */
+#define B0_Tacs ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ? /* ?0clk */
+#define B0_Tcos ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ? /* ?0clk */
+#define B0_Tacc ? ? ? ? ? ? ? ? ? ? ? ?0x7 ? ? /* 14clk */
+#define B0_Tcoh ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ? /* ?0clk */
+#define B0_Tah ? ? ? ? ? ? ? ? 0x0 ? ? /* ?0clk */
+#define B0_Tacp ? ? ? ? ? ? ? ? ? ? ? ?0x0
+#define B0_PMC ? ? ? ? ? ? ? ? 0x0 ? ? /* normal */
+
+/* BANK1CON */
+#define B1_Tacs ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ? /* ?0clk */
+#define B1_Tcos ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ? /* ?0clk */
+#define B1_Tacc ? ? ? ? ? ? ? ? ? ? ? ?0x7 ? ? /* 14clk */
+#define B1_Tcoh ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ? /* ?0clk */
+#define B1_Tah ? ? ? ? ? ? ? ? 0x0 ? ? /* ?0clk */
+#define B1_Tacp ? ? ? ? ? ? ? ? ? ? ? ?0x0
+#define B1_PMC ? ? ? ? ? ? ? ? 0x0
+
+#define B2_Tacs ? ? ? ? ? ? ? ? ? ? ? ?0x0
+#define B2_Tcos ? ? ? ? ? ? ? ? ? ? ? ?0x0
+#define B2_Tacc ? ? ? ? ? ? ? ? ? ? ? ?0x7
+#define B2_Tcoh ? ? ? ? ? ? ? ? ? ? ? ?0x0
+#define B2_Tah ? ? ? ? ? ? ? ? 0x0
+#define B2_Tacp ? ? ? ? ? ? ? ? ? ? ? ?0x0
+#define B2_PMC ? ? ? ? ? ? ? ? 0x0
+
+#define B3_Tacs ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ? /* ?0clk */
+#define B3_Tcos ? ? ? ? ? ? ? ? ? ? ? ?0x3 ? ? /* ?4clk */
+#define B3_Tacc ? ? ? ? ? ? ? ? ? ? ? ?0x7 ? ? /* 14clk */
+#define B3_Tcoh ? ? ? ? ? ? ? ? ? ? ? ?0x1 ? ? /* ?1clk */
+#define B3_Tah ? ? ? ? ? ? ? ? 0x0 ? ? /* ?0clk */
+#define B3_Tacp ? ? ? ? ? ? ? ? ? ? ? ?0x3 ? ? /* ?6clk */
+#define B3_PMC ? ? ? ? ? ? ? ? 0x0 ? ? /* normal */
+
+#define B4_Tacs ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ? /* ?0clk */
+#define B4_Tcos ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ? /* ?0clk */
+#define B4_Tacc ? ? ? ? ? ? ? ? ? ? ? ?0x7 ? ? /* 14clk */
+#define B4_Tcoh ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ? /* ?0clk */
+#define B4_Tah ? ? ? ? ? ? ? ? 0x0 ? ? /* ?0clk */
+#define B4_Tacp ? ? ? ? ? ? ? ? ? ? ? ?0x0
+#define B4_PMC ? ? ? ? ? ? ? ? 0x0 ? ? /* normal */
+
+#define B5_Tacs ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ? /* ?0clk */
+#define B5_Tcos ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ? /* ?0clk */
+#define B5_Tacc ? ? ? ? ? ? ? ? ? ? ? ?0x7 ? ? /* 14clk */
+#define B5_Tcoh ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ? /* ?0clk */
+#define B5_Tah ? ? ? ? ? ? ? ? 0x0 ? ? /* ?0clk */
+#define B5_Tacp ? ? ? ? ? ? ? ? ? ? ? ?0x0
+#define B5_PMC ? ? ? ? ? ? ? ? 0x0 ? ? /* normal */
+
+#define B6_MT ? ? ? ? ? ? ? ? ?0x3 ? ? /* SDRAM */
+#define B6_Trcd ? ? ? ? ? ? ? ? ? ? ? ?0x1
+#define B6_SCAN ? ? ? ? ? ? ? ? ? ? ? ?0x1 ? ? /* 9bit */
+
+#define B7_MT ? ? ? ? ? ? ? ? ?0x3 ? ? /* SDRAM */
+#define B7_Trcd ? ? ? ? ? ? ? ? ? ? ? ?0x1 ? ? /* 3clk */
+#define B7_SCAN ? ? ? ? ? ? ? ? ? ? ? ?0x1 ? ? /* 9bit */
+
+/* REFRESH parameter */
+#define REFEN ?0x1 ? ? /* Refresh enable */
+#define TREFMD 0x0 ? ? /* CBR(CAS before RAS)/Auto refresh */
+#define Trp ? ?0x0 ? ? /* 2clk */
+#define Trc ? ?0x3 ? ? /* 7clk */
+#define Tchr ? 0x2 ? ? /* 3clk */
+#define REFCNT 1113 ? ?/* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
+/**************************************/
board/gec/gec2410/lowlevel_init.S new file +21 -0
new file mode 100644
index 0000000..c40440b
@@ -0,0 +1,95 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
+ * ? ? ? ? ? ? ? ? ? ? Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
+ *
+ * Modified for the Samsung SMDK2410 by
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <[email protected]>
+ *
+ * Copyright (C) 2009 Hui Tang <[email protected]>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,

board/gec/gec2410/lowlevel_init.S line 31

Quoted 10 lines
board/gec/gec2410/lowlevel_init.S new file +10 -0
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+

please remove this blank line

board/gec/gec2410/lowlevel_init.S line 34

Quoted 3 lines
board/gec/gec2410/lowlevel_init.S new file +3 -0
+
+#include <config.h>
+#include <version.h>

please remove this blank line also

Quoted 198 lines
board/gec/gec2410/lowlevel_init.S new file +61 -0
+
+#include "gec2410_mem.h"
+
+_TEXT_BASE:
+ ? ? ? .word ? TEXT_BASE
+
+.globl lowlevel_init
+lowlevel_init:
+#if defined(CONFIG_NAND_SPL) || !defined(CONFIG_BOOT_NAND)
+ ? ? ? /* memory control configuration */
+ ? ? ? /* make r0 relative the current location so that it */
+ ? ? ? /* reads SMRDATA out of FLASH rather than memory ! */
+ ? ? ? ldr ? ? r0, =SMRDATA
+ ? ? ? ldr ? ? r1, _TEXT_BASE
+ ? ? ? sub ? ? r0, r0, r1
+ ? ? ? ldr ? ? r1, =BWSCON ? ? /* Bus Width Status Controller */
+ ? ? ? add ? ? r2, r0, #13*4
+0:
+ ? ? ? ldr ? ? r3, [r0], #4
+ ? ? ? str ? ? r3, [r1], #4
+ ? ? ? cmp ? ? r2, r0
+ ? ? ? bne ? ? 0b
+#endif /* CONFIG_NAND_SPL */
+
+ ? ? ? /* everything is fine now */
+ ? ? ? mov ? ? pc, lr
+
+/* dummy function, called by start_code() in cpu/arm920t/start.S */
+.globl coloured_LED_init
+coloured_LED_init:
+ ? ? ? mov ? ? pc, lr
+
+/* dummy function, called by start_code() in cpu/arm920t/start.S */
+.globl red_LED_on
+red_LED_on:
+ ? ? ? mov ? ? pc, lr
+
+ ? ? ? .ltorg
+/* the literal pools origin */
+
+SMRDATA:
+ ? ?.word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12) ? ? \
+ ? ? ? +(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
+ ? ?.word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8) ? ?\
+ ? ? ? +(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
+ ? ?.word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8) ? ?\
+ ? ? ? +(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
+ ? ?.word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8) ? ?\
+ ? ? ? +(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
+ ? ?.word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8) ? ?\
+ ? ? ? +(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
+ ? ?.word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8) ? ?\
+ ? ? ? +(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
+ ? ?.word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8) ? ?\
+ ? ? ? +(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
+ ? ?.word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
+ ? ?.word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
+ ? ?.word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
+ ? ?.word 0x32
+ ? ?.word 0x30
+ ? ?.word 0x30
board/gec/gec2410/u-boot-nand.lds new file +61 -0
new file mode 100644
index 0000000..a30ece3
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <[email protected]>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <[email protected]>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ ? ? ? . = 0x00000000;
+
+ ? ? ? . = ALIGN(4);
+ ? ? ? .text ? ? ?:
+ ? ? ? {
+ ? ? ? ? cpu/arm920t/start.o ? (.text)
+ ? ? ? ? *(.text)
+ ? ? ? }
+
+ ? ? ? . = ALIGN(4);
+ ? ? ? .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ ? ? ? . = ALIGN(4);
+ ? ? ? .data : { *(.data) }
+
+ ? ? ? . = ALIGN(4);
+ ? ? ? .got : { *(.got) }
+
+ ? ? ? __u_boot_cmd_start = .;
+ ? ? ? .u_boot_cmd : { *(.u_boot_cmd) }
+ ? ? ? __u_boot_cmd_end = .;
+
+ ? ? ? . = ALIGN(4);
+ ? ? ? .mmudata : { *(.mmudata) }
+
+ ? ? ? . = ALIGN(4);
+ ? ? ? __bss_start = .;
+ ? ? ? .bss : { *(.bss) . = ALIGN(4); }
+ ? ? ? _end = .;
+}
cpu/arm920t/s3c24x0/timer.c +2 -1
index 20cedd4..d463a03 100644
@@ -188,7 +188,8 @@ ulong get_tbclk(void)
 ? ? ? ?tbclk = timer_load_val * 100;
 ?#elif defined(CONFIG_SBC2410X) || \
 ? ? ? defined(CONFIG_SMDK2410) || \
- ? ? ?defined(CONFIG_VCMA9)
+ ? ? ?defined(CONFIG_VCMA9) || \
+ ? ? ?defined(CONFIG_GEC2410)
 ? ? ? ?tbclk = CONFIG_SYS_HZ;

?#else
?# ? ? ?error "tbclk not configured"

include/configs/gec2410.h new file +50 -0
new file mode 100644
index 0000000..8279e36
@@ -0,0 +1,262 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <[email protected]>
+ * Gary Jennejohn <[email protected]>
+ * David Mueller <[email protected]>
+ *
+ * Configuation settings for the GD-Embedded Software Center GEC2410 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM920T ? ? ? ? 1 ? ? ? /* This is an ARM920T Core ? ? ?*/
+#define CONFIG_S3C2410 ? ? ? ? 1 ? ? ? /* in a SAMSUNG S3C2410 SoC ? ? */
+#define CONFIG_GEC2410 ? ? ? ? 1 ? ? ? /* on a GEC2410 Board ? ? ? ? ? */
+
+#define CONFIG_SYS_SDRAM_BASE ?0x30000000
+
+/* input clock of PLL */
+#define CONFIG_SYS_CLK_FREQ ? ?12000000 /* the GEC2410 has 12MHz input clock */
+
+#if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000)
+#define CONFIG_ENABLE_MMU
+#endif
+
+#define CONFIG_MEMORY_UPPER_CODE
+

include/configs/gec2410.h line 60

Quoted 10 lines
include/configs/gec2410.h new file +10 -0
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+
+#define USE_920T_MMU ? ? ? ? ? 1
+#if 0
+#undef CONFIG_USE_IRQ ? ? ? ? ? ? ? ? ?/* we don't need IRQ/FIQ stuff */
+
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+#endif

please remove this dead code

Quoted 21 lines
include/configs/gec2410.h new file +21 -0
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN ? ? ? ? ?(CONFIG_ENV_SIZE + 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE ? ? ? 128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_NET_MULTI
+#define CONFIG_CS8900 ? ? ? ? ?/* we have a CS8900 on-board */
+#define CONFIG_CS8900_BASE ? ? 0x19000300
+#define CONFIG_CS8900_BUS16 ? ?/* the Linux driver does accesses as shorts */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_S3C24X0_SERIAL ?1
+#define CONFIG_SERIAL1 ? ? ? ? ?1 ? ? ?/* we use SERIAL 1 on GEC2410 */
+

include/configs/gec2410.h line 91

Quoted 10 lines
include/configs/gec2410.h new file +10 -0
+/************************************************************
+ * RTC
+ ************************************************************/
+#define ? ? ? ?CONFIG_RTC_S3C24X0 ? ? ?1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE ? ? ? ? ? ? ? ?115200
+

please remove this blank line

include/configs/gec2410.h line 100

Quoted 9 lines
include/configs/gec2410.h new file +9 -0
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+

please remove this blank line

include/configs/gec2410.h line 108

Quoted 8 lines
include/configs/gec2410.h new file +8 -0
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_SAVEENV

saveenv is already defined in config_cmd_default

Quoted 378 lines
include/configs/gec2410.h new file +154 -0
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP ? ? ? ? ? ? ? ? ? ?/* undef to save memory ? ? ? */
+#define CONFIG_SYS_PROMPT ? ? ?"GEC2410#" ? ? ?/* Monitor Command Prompt ? ? */
+#define CONFIG_SYS_CBSIZE ? ? ?256 ? ? ? ? ? ? /* Console I/O Buffer Size ? ?*/
+#define CONFIG_SYS_PBSIZE ? ? ?384 ? ? ? ? ? ? /* Print Buffer Size ? ? ? ? ?*/
+#define CONFIG_SYS_MAXARGS ? ? 16 ? ? ? ? ? ? ?/* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE ?/* Boot Argument Buffer Size ?*/
+
+#define CONFIG_SYS_MEMTEST_START ? ? ? \
+ ? ? ? CONFIG_SYS_SDRAM_BASE ? ? ? ? ? ? ? ? ? /* memtest works on ? ? ? ? ? */
+#define CONFIG_SYS_MEMTEST_END ? ? ? ? \
+ ? ? ? (CONFIG_SYS_SDRAM_BASE + 0x3e00000) ? ? /* 62 MB in DRAM ? ? ? ? ? ? ?*/
+
+#define CONFIG_SYS_LOAD_ADDR ? CONFIG_SYS_SDRAM_BASE /* default load address */
+
+#define CONFIG_SYS_HZ ? ? ? ? ?1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE ? ? ?{ 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE ? ? ? 0x40000 ? ? ? ? /* regular stack 256KB */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ ? (4*1024) ? ? ? ?/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ ? (4*1024) ? ? ? ?/* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS ? 1
+#define PHYS_SDRAM_1 ? ? ? ? ? CONFIG_SYS_SDRAM_BASE ? /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE ? ? ?0x04000000 ? ? ? ? ? ? ?/* 64 MB ? ? ? ? */
+
+#define CONFIG_SYS_FLASH_BASE ?0x00000000
+#define CONFIG_SYS_MONITOR_BASE ? ? ? ?0x00000000
+
+#define PHYS_FLASH_1 ? ? ? ? ? CONFIG_SYS_FLASH_BASE
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 ? /* max number of memory banks ? ? ? ?*/
+#define CONFIG_SYS_MAX_FLASH_SECT ?512 /* max number of sectors on one chip */
+
+#define CONFIG_SYS_FLASH_CFI ? ? ? ? ? 1 ? /* Use CFI parameters (needed?) */
+#define CONFIG_FLASH_CFI_DRIVER ? ? ? ? ? ? ? ?1
+#define CONFIG_SYS_FLASH_CFI_WIDTH ? ? FLASH_CFI_16BIT
+
+#define PHYS_FLASH_SIZE ? ? ? ? ? ? ? ?0x00200000 ? ? ?/* 2MB ? ? ? ? ? ? ? ? */
+#define CONFIG_ENV_ADDR ? ? ? ? ? ? ? ?\
+ ? ? ? (CONFIG_SYS_FLASH_BASE + 0x0F0000) ? ? ?/* addr of environment */
+
+/* timeout values are in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT ? ?\
+ ? ? ? (5 * CONFIG_SYS_HZ) ? ? ? ? ? ? ? ? ? ? /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT ? ?\
+ ? ? ? (5 * CONFIG_SYS_HZ) ? ? ? ? ? ? ? ? ? ? /* Timeout for Flash Write */
+
+#define CONFIG_ENV_SIZE ? ? ? ?0x4000 ?/* Total Size of Environment Parameters */
+
+/*
+ * GEC2410 board specific data
+ */
+
+#define CONFIG_IDENT_STRING ? ?" for GEC2410"
+
+/* base address for uboot */
+#define CONFIG_SYS_PHY_UBOOT_BASE ? ? ?(CONFIG_SYS_SDRAM_BASE + 0x03e00000)
+/* total memory available to uboot */
+#define CONFIG_SYS_UBOOT_SIZE ? ? ? ? ?(1024 * 1024)
+
+/* Put environment copies after the end of U-Boot owned RAM */
+#define CONFIG_NAND_ENV_DST ? ?(CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE)
+
+#ifdef CONFIG_ENABLE_MMU
+#define CONFIG_SYS_MAPPED_RAM_BASE ? ? 0xc0000000
+#define CONFIG_BOOTCOMMAND ? ? "nand read 0xc0008000 0x60000 0x1a0000;" \
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "bootm 0xc0008000"
+#else
+#define CONFIG_SYS_MAPPED_RAM_BASE ? ? CONFIG_SYS_SDRAM_BASE
+#define CONFIG_BOOTCOMMAND ? ? "nand read 0x30008000 0x60000 0x1a0000;" \
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "bootm 0x30008000"
+#endif
+
+/* NAND U-Boot load and start address */
+#define CONFIG_SYS_UBOOT_BASE ?(CONFIG_SYS_MAPPED_RAM_BASE + 0x03e00000)
+#define CONFIG_ENV_OFFSET ? ? ?0x0040000 /* Offset of Environment Sector */
+
+/* NAND configuration */
+#define CONFIG_SYS_MAX_NAND_DEVICE ? ? 1
+#define CONFIG_SYS_NAND_BASE 0x4e00000c /* R/W NAND Flash data register */
+#define CONFIG_S3C2410_NAND_HWECC
+#define CONFIG_S3C2410_NAND_BBT
+
+/* NUB load-addr ?*/
+#define CONFIG_SYS_NAND_U_BOOT_DST ? ? CONFIG_SYS_PHY_UBOOT_BASE
+/* NUB start-addr */
+#define CONFIG_SYS_NAND_U_BOOT_START ? CONFIG_SYS_NAND_U_BOOT_DST
+
+/* Offset to RAM U-Boot image */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS ? ?(4 * 1024)
+/* Size of RAM U-Boot image ? */
+#define CONFIG_SYS_NAND_U_BOOT_SIZE ? ?(252 * 1024)
+
+/* NAND chip page size ? ? ? ? */
+#define CONFIG_SYS_NAND_PAGE_SIZE ? ? ?512
+/* NAND chip block size ? ? ? ? ? ? ? ?*/
+#define CONFIG_SYS_NAND_BLOCK_SIZE ? ? (16 * 1024)
+/* NAND chip page per block count ?*/
+#define CONFIG_SYS_NAND_PAGE_COUNT ? ? 32
+/* Location of the bad-block label */
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS ?0
+/* Extra address cycle for > 32MiB */
+#define CONFIG_SYS_NAND_4_ADDR_CYCLE ? 1 ? ? ? /* Fourth addr used (>32MB) */
+
+/* Size of the block protected by one OOB (Spare Area in Samsung terminology) */
+#define CONFIG_SYS_NAND_ECCSIZE CONFIG_SYS_NAND_PAGE_SIZE
+/* Number of ECC bytes per OOB - S3C2410 calculates 4 bytes ECC in 1-bit mode */
+#define CONFIG_SYS_NAND_ECCBYTES ? ? ? 3
+/* Number of ECC-blocks per NAND page */
+#define CONFIG_SYS_NAND_ECCSTEPS ? ? ? \
+ ? ? ? (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
+/* Size of a single OOB region */
+#define CONFIG_SYS_NAND_OOBSIZE ? ? ? ?16
+/* Number of ECC bytes per page */
+#define CONFIG_SYS_NAND_ECCTOTAL ? ? ? \
+ ? ? ? (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
+/* ECC byte positions */
+#define CONFIG_SYS_NAND_ECCPOS ? ? ? ? {0, 1, 2}
+
+#define CONFIG_SYS_64BIT_VSPRINTF ? ? ?/* needed for nand_util.c */
+
+/* Boot configuration */
+#define CONFIG_BOOT_NAND
+#define CONFIG_NAND
+#define CONFIG_NAND_S3C2410 ? ? ? ? ? ?1
+
+/* Settings as above boot configuration */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_BOOTARGS ? ? ? ? ? ? ? ?"console=ttySAC,115200"
+
+#endif /* __CONFIG_H */
nand_spl/board/gec/gec2410/Makefile new file +103 -0
new file mode 100644
index 0000000..ece460d
@@ -0,0 +1,103 @@
+#
+# (C) Copyright 2006-2007
+# Stefan Roese, DENX Software Engineering, sr at denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <[email protected]>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+CONFIG_NAND_SPL ? ? ? ? ? ? ? ? ? ? ? ?= y
+CONFIG_SKIP_RELOCATE_UBOOT ? ? = y
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS ? ? ? ?= -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_NAND_SPL -DCONFIG_SKIP_RELOCATE_UBOOT
+CFLAGS += -DCONFIG_NAND_SPL -DCONFIG_SKIP_RELOCATE_UBOOT
+
+SOBJS ?= start.o lowlevel_init.o
+COBJS ?= nand_boot.o s3c2410_nand.o
+
+SRCS ? := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS ? := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR ?:= $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj ? ? ? ?:= $(OBJTREE)/nand_spl/
+
+ALL ? ?= $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+
+all: ? $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+ ? ? ? $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin: ? ? ?$(nandobj)u-boot-spl
+ ? ? ? $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: ?$(OBJS) $(nandobj)u-boot.lds
+ ? ? ? cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
+ ? ? ? ? ? ? ? -Map $(nandobj)u-boot-spl.map \
+ ? ? ? ? ? ? ? -o $(nandobj)u-boot-spl
+
+$(nandobj)u-boot.lds: $(LDSCRIPT)
+ ? ? ? $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+
+# create symbolic links for common files
+
+# from cpu directory
+$(obj)start.S:
+ ? ? ? @rm -f $@
+ ? ? ? @ln -s $(TOPDIR)/cpu/arm920t/start.S $@
+
+# from SoC directory
+
+# from board directory
+$(obj)lowlevel_init.S:
+ ? ? ? @rm -f $@
+ ? ? ? @ln -s $(TOPDIR)/board/gec/gec2410/lowlevel_init.S $@
+
+# from nand_spl directory
+$(obj)nand_boot.c:
+ ? ? ? @rm -f $@
+ ? ? ? @ln -s $(TOPDIR)/nand_spl/nand_boot.c $@
+
+# from drivers/mtd/nand directory
+$(obj)s3c2410_nand.c:
+ ? ? ? @rm -f $@
+ ? ? ? @ln -s $(TOPDIR)/drivers/mtd/nand/s3c2410_nand.c $@
+
+#########################################################################
+
+$(obj)%.o: ? ? $(obj)%.S
+ ? ? ? $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: ? ? $(obj)%.c
+ ? ? ? $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
nand_spl/board/gec/gec2410/config.mk new file +40 -0
new file mode 100644
index 0000000..7db7fd1
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2006
+# Stefan Roese, DENX Software Engineering, sr at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# GEC2410 Study Platform (gec2410) board
+
+# TEXT_BASE for SPL:
+#
+# On S3C2410 platforms the SPL is located in SRAM at 0.
+#
+TEXT_BASE = 0
+
+include $(TOPDIR)/board/$(BOARDDIR)/config.mk
+
+# PAD_TO used to generate a 4kByte binary needed for the combined image
+# -> PAD_TO = TEXT_BASE + 4096
+PAD_TO := 0x00001000
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
nand_spl/board/gec/gec2410/u-boot.lds new file +60 -1
new file mode 100644
index 0000000..5871f7e
@@ -0,0 +1,60 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <[email protected]>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <[email protected]>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ ? ? ? . = 0x00000000;
+
+ ? ? ? . = ALIGN(4);
+ ? ? ? .text ? ? ?:
+ ? ? ? {
+ ? ? ? ? start.o ? ? ? (.text)
+ ? ? ? ? nand_boot.o ? (.text)
+
+ ? ? ? ? *(.text)
+ ? ? ? }
+
+ ? ? ? . = ALIGN(4);
+ ? ? ? .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ ? ? ? . = ALIGN(4);
+ ? ? ? .data : { *(.data) }
+
+ ? ? ? . = ALIGN(4);
+ ? ? ? .got : { *(.got) }
+
+ ? ? ? __u_boot_cmd_start = .;
+ ? ? ? .u_boot_cmd : { *(.u_boot_cmd) }
+ ? ? ? __u_boot_cmd_end = .;
+
+ ? ? ? . = ALIGN(4);
+ ? ? ? __bss_start = .;
+ ? ? ? .bss : { *(.bss) . = ALIGN(4); }
+ ? ? ? _end = .;
+}
--

1.6.0.4

Quoted 5 lines

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Thanks
Minkyu Kang

Signature · 2 lines
from. prom.
www.promsoft.net
#2 lore raw

PATCH 1/4 ARM Add New Board GEC2410

In reply to Hui.Tang

Dear "Hui.Tang",

Quoted 6 lines · In message <[email protected]> you wrote:

This patch add a new ARM board GEC2410.
checkpatch.pl shows that all things are fine.

total: 0 errors, 0 warnings, 1268 lines checked

0001-ARM-Add-New-Board-GEC2410.patch has no obvious style problems and is ready for submission.

As mentioned before by others: this does noty belong into tht ecommit message.

Quoted 5 lines
Makefile +0 -0
index bcb3fe9..2de0b1d 100644

Makefile davinci_dm365evm_config : unconfig · line 2959

Quoted 9 lines
Makefile +6 -0
@@ -2951,6 +2951,13 @@ davinci_dm365evm_config :	unconfig
 davinci_dm6467evm_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
 
+gec2410_config	:	unconfig
+	@mkdir -p $(obj)include $(obj)board/gec/gec2410
+	@mkdir -p $(obj)nand_spl/board/gec/gec2410
+	@echo "RAM_TEXT = 0x33e00000" >> $(obj)board/gec/gec2410/config.tmp
+	@$(MKCONFIG) $(@:_config=) arm arm920t gec2410 gec s3c24x0
+	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk

Please so not put such scripting into the top level Makefile. Especially since this is all unconditional. Please move to board config file.

Quoted 5 lines
board/gec/gec2410/config.mk new file +0 -0
new file mode 100644
index 0000000..f32ee2e

...

board/gec/gec2410/config.mk line 30

Quoted 7 lines
board/gec/gec2410/config.mk new file +7 -0
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef CONFIG_NAND_SPL
+TEXT_BASE = $(RAM_TEXT)
+else
+TEXT_BASE = 0
+endif

There is nothing in the code that would set CONFIG_NAND_SPL, so please get rid of the dead code.

Quoted 1 line

+LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot-nand.lds

u-boot-nand.lds? Sure?

Quoted 1 line

+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/gec/gec2410

Why is this needed?

Quoted 6 lines
board/gec/gec2410/gec2410.c new file +0 -0
new file mode 100644
index 0000000..a9b6290
@@ -0,0 +1,313 @@

...

Quoted 13 lines
board/gec/gec2410/gec2410.c new file +13 -0
+#define FCLK_SPEED 1
+
+#if FCLK_SPEED == 0		/* Fout = 203MHz, Fin = 12MHz for Audio */
+#define M_MDIV	0xC3
+#define M_PDIV	0x4
+#define M_SDIV	0x1
+#elif FCLK_SPEED == 1		/* Fout = 202.8MHz */
+#define M_MDIV	0xA1
+#define M_PDIV	0x3
+#define M_SDIV	0x1
+#endif
+
+#define USB_CLOCK 1

board/gec/gec2410/gec2410.c line 60

Quoted 10 lines
board/gec/gec2410/gec2410.c new file +10 -0
+
+#if USB_CLOCK == 0
+#define U_M_MDIV	0xA1
+#define U_M_PDIV	0x3
+#define U_M_SDIV	0x1
+#elif USB_CLOCK == 1
+#define U_M_MDIV	0x48
+#define U_M_PDIV	0x3
+#define U_M_SDIV	0x2
+#endif

Please move to some header file.

board/gec/gec2410/gec2410.c line 67

Quoted 6 lines
board/gec/gec2410/gec2410.c new file +6 -0
+static inline void delay(unsigned long loops)
+{
+	__asm__ volatile ("1:\n"
+	  "subs %0, %1, #1\n"
+	  "bne 1b" : "=r" (loops) : "0" (loops));
+}

Is there really no better way to implement a delay? For example in a way that does not depend on the system clock?

cpu/arm920t/s3c24x0/timer.c ulong get_tbclk(void) · line 193

Quoted 10 lines
cpu/arm920t/s3c24x0/timer.c +2 -1
@@ -188,7 +188,8 @@ ulong get_tbclk(void)
 	tbclk = timer_load_val * 100;
 #elif defined(CONFIG_SBC2410X) || \
       defined(CONFIG_SMDK2410) || \
-      defined(CONFIG_VCMA9)
+      defined(CONFIG_VCMA9) || \
+      defined(CONFIG_GEC2410)
 	tbclk = CONFIG_SYS_HZ;

Please keep list sorted.

And maybe we can use a feature-specific define instead of adding more and more boards here?

Quoted 6 lines
include/configs/gec2410.h new file +0 -0
new file mode 100644
index 0000000..8279e36
@@ -0,0 +1,262 @@

...

include/configs/gec2410.h line 60

Quoted 5 lines
include/configs/gec2410.h new file +5 -0
+#if 0
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
+
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+#endif

Please do not add dead code.

include/configs/gec2410.h line 112

Quoted 8 lines
include/configs/gec2410.h new file +8 -0
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT

You may want to keep such lists sorted.

nand_spl/board/gec/gec2410/u-boot.lds

Quoted 5 lines
nand_spl/board/gec/gec2410/u-boot.lds new file +0 -0
new file mode 100644
index 0000000..5871f7e

This file seems to be unused. Why add it?

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"A verbal contract isn't worth the paper it's printed on."
- Samuel Goldwyn
author
#3 lore raw

PATCH 1/4 ARM Add New Board GEC2410

Dear Wolfgang,

Quoted 3 lines
Quoted 1 line

+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/gec/gec2410

Why is this needed?

in /board/gec/gec2410/lowlevel_init.S, it includes "gec2410_mem.h", which is at $(TOPDIR)/board/gec/gec2410.

Quoted 7 lines

nand_spl/board/gec/gec2410/u-boot.lds

Quoted 5 lines
nand_spl/board/gec/gec2410/u-boot.lds new file +0 -0
new file mode 100644
index 0000000..5871f7e

This file seems to be unused. Why add it?

/nand_spl/board/gec/gec2410/Makefile needs it to generate /nand_spl/board/u-boot.lds

Best regards,

Hui.

#4 lore raw

PATCH 1/4 ARM Add New Board GEC2410

Dear Hui Tang,

Quoted 8 lines · In message <[email protected]> you…

Dear Wolfgang,

Quoted 3 lines
Quoted 1 line

+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/gec/gec2410

Why is this needed?

in /board/gec/gec2410/lowlevel_init.S, it includes "gec2410_mem.h", which is at $(TOPDIR)/board/gec/gec2410.

So it's in the same directory? Then this should not be needed.

Quoted 10 lines
Quoted 7 lines

nand_spl/board/gec/gec2410/u-boot.lds

Quoted 5 lines
nand_spl/board/gec/gec2410/u-boot.lds new file +0 -0
new file mode 100644
index 0000000..5871f7e

This file seems to be unused. Why add it?

/nand_spl/board/gec/gec2410/Makefile needs it to generate /nand_spl/board/u-boot.lds

I see no reference in the Makefile?

Best regards,

Wolfgang Denk

Signature · 7 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de

There were meetings. There were always meetings. And they were  dull,
which is part of the reason they were meetings. Dull likes company.
                                    - Terry Pratchett, _Making_Money_