genirq: try_one_irq() should be called with irq disabled
PATCH 1/1 genirq: try_one_irq() should be called with irq disabled
Prarit report this:
Booting 2.6.32-rc5 on some IBM systems results in
Disabling IRQ #19
=================================
[ INFO: inconsistent lock state ]
2.6.32-rc5 #1
---------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
(&irq_desc_lock_class){?.-...}, at: [<ffffffff810c264e>] try_one_irq+0x32/0x138
{IN-HARDIRQ-W} state was registered at:
[<ffffffff81095160>] __lock_acquire+0x2fc/0xd5d [<ffffffff81095cb4>] lock_acquire+0xf3/0x12d [<ffffffff814cdadd>] _spin_lock+0x40/0x89 [<ffffffff810c3389>] handle_level_irq+0x30/0x105 [<ffffffff81014e0e>] handle_irq+0x95/0xb7 [<ffffffff810141bd>] do_IRQ+0x6a/0xe0 [<ffffffff81012813>] ret_from_intr+0x0/0x16 irq event stamp: 195096 hardirqs last enabled at (195096): [<ffffffff814cd7f7>] _spin_unlock_irq+0x3a/0x5c hardirqs last disabled at (195095): [<ffffffff814cdbdd>] _spin_lock_irq+0x29/0x95 softirqs last enabled at (195088): [<ffffffff81068c92>] __do_softirq+0x1c1/0x1ef softirqs last disabled at (195093): [<ffffffff8101304c>] call_softirq+0x1c/0x30
other info that might help us debug this:
1 lock held by swapper/0:
#0: (kernel/irq/spurious.c:21){+.-...}, at: [<ffffffff81070cf2>]
run_timer_softirq+0x1a9/0x315 stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.32-rc5 #1 Call Trace: <IRQ> [<ffffffff81093e94>] valid_state+0x187/0x1ae [<ffffffff81096c7b>] ? check_usage_backwards+0x0/0xa3 [<ffffffff81093fe4>] mark_lock+0x129/0x253 [<ffffffff810951d4>] __lock_acquire+0x370/0xd5d [<ffffffff810c264e>] ? try_one_irq+0x32/0x138 [<ffffffff8109329d>] ? save_trace+0x4e/0xcd [<ffffffff81095cb4>] lock_acquire+0xf3/0x12d [<ffffffff810c264e>] ? try_one_irq+0x32/0x138 [<ffffffff81070cf2>] ? run_timer_softirq+0x1a9/0x315 [<ffffffff810c264e>] ? try_one_irq+0x32/0x138 [<ffffffff814cdadd>] _spin_lock+0x40/0x89 [<ffffffff810c264e>] ? try_one_irq+0x32/0x138 [<ffffffff810c264e>] try_one_irq+0x32/0x138 [<ffffffff810c2795>] poll_all_shared_irqs+0x41/0x6d [<ffffffff810c27dd>] poll_spurious_irqs+0x1c/0x49 [<ffffffff81070d82>] run_timer_softirq+0x239/0x315 [<ffffffff81070cf2>] ? run_timer_softirq+0x1a9/0x315 [<ffffffff810c27c1>] ? poll_spurious_irqs+0x0/0x49 [<ffffffff81068bd3>] __do_softirq+0x102/0x1ef [<ffffffff8108eccf>] ? tick_dev_program_event+0x46/0xcc [<ffffffff8101304c>] call_softirq+0x1c/0x30 [<ffffffff81014b65>] do_softirq+0x59/0xca [<ffffffff810686ad>] irq_exit+0x58/0xae [<ffffffff81029b84>] smp_apic_timer_interrupt+0x94/0xba [<ffffffff81012a33>] apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff8101a7b5>] ? mwait_idle+0x8c/0xb5 [<ffffffff8101a7ac>] ? mwait_idle+0x83/0xb5 [<ffffffff81010e55>] ? cpu_idle+0xbe/0x100 [<ffffffff814c4270>] ? start_secondary+0x219/0x270
The reason is that try_one_irq() is called both from hardirq context and softirq context. And by default the timer handler poll_all_shared_irqs() is called with irq enabled.
Then the two usage will cause inconsistent.
--- kernel/irq/spurious.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
kernel/irq/spurious.c +2 -0
@@ -121,7 +121,9 @@ static void poll_all_shared_irqs(void)if (!(status &IRQ_SPURIOUS_DISABLED ))continue ; +local_irq_disable ();try_one_irq (i, desc); +local_irq_enable (); } }
Signature · 1 line
1.6.3.3
[tip:irq/urgent] genirq: try_one_irq() must be called with irq disabled
Commit-ID: e7e7e0c084ef862d5754701108d4a038514d6314 Gitweb: http://git.kernel.org/tip/e7e7e0c084ef862d5754701108d4a038514d6314 Author: Yong Zhang <[email protected]> AuthorDate: Sat, 7 Nov 2009 11:16:13 +0800 Committer: Thomas Gleixner <[email protected]> CommitDate: Sat, 7 Nov 2009 21:44:45 +0100
genirq: try_one_irq() must be called with irq disabled
Prarit reported:
=================================
[ INFO: inconsistent lock state ]
2.6.32-rc5 #1
---------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
(&irq_desc_lock_class){?.-...}, at: [<ffffffff810c264e>] try_one_irq+0x32/0x138
{IN-HARDIRQ-W} state was registered at:
[<ffffffff81095160>] __lock_acquire+0x2fc/0xd5d [<ffffffff81095cb4>] lock_acquire+0xf3/0x12d [<ffffffff814cdadd>] _spin_lock+0x40/0x89 [<ffffffff810c3389>] handle_level_irq+0x30/0x105 [<ffffffff81014e0e>] handle_irq+0x95/0xb7 [<ffffffff810141bd>] do_IRQ+0x6a/0xe0 [<ffffffff81012813>] ret_from_intr+0x0/0x16 irq event stamp: 195096 hardirqs last enabled at (195096): [<ffffffff814cd7f7>] _spin_unlock_irq+0x3a/0x5c hardirqs last disabled at (195095): [<ffffffff814cdbdd>] _spin_lock_irq+0x29/0x95 softirqs last enabled at (195088): [<ffffffff81068c92>] __do_softirq+0x1c1/0x1ef softirqs last disabled at (195093): [<ffffffff8101304c>] call_softirq+0x1c/0x30
other info that might help us debug this:
1 lock held by swapper/0:
#0: (kernel/irq/spurious.c:21){+.-...}, at: [<ffffffff81070cf2>]
run_timer_softirq+0x1a9/0x315 stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.32-rc5 #1 Call Trace: <IRQ> [<ffffffff81093e94>] valid_state+0x187/0x1ae [<ffffffff81093fe4>] mark_lock+0x129/0x253 [<ffffffff810951d4>] __lock_acquire+0x370/0xd5d [<ffffffff81095cb4>] lock_acquire+0xf3/0x12d [<ffffffff814cdadd>] _spin_lock+0x40/0x89 [<ffffffff810c264e>] try_one_irq+0x32/0x138 [<ffffffff810c2795>] poll_all_shared_irqs+0x41/0x6d [<ffffffff810c27dd>] poll_spurious_irqs+0x1c/0x49 [<ffffffff81070d82>] run_timer_softirq+0x239/0x315 [<ffffffff81068bd3>] __do_softirq+0x102/0x1ef [<ffffffff8101304c>] call_softirq+0x1c/0x30 [<ffffffff81014b65>] do_softirq+0x59/0xca [<ffffffff810686ad>] irq_exit+0x58/0xae [<ffffffff81029b84>] smp_apic_timer_interrupt+0x94/0xba [<ffffffff81012a33>] apic_timer_interrupt+0x13/0x20
The reason is that try_one_irq() is called from hardirq context with interrupts disabled and from softirq context (poll_all_shared_irqs()) with interrupts enabled.
Disable interrupts before calling it from poll_all_shared_irqs().
LKML-Reference: <[email protected]>
--- kernel/irq/spurious.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
kernel/irq/spurious.c +2 -0
@@ -121,7 +121,9 @@ static void poll_all_shared_irqs(void)if (!(status &IRQ_SPURIOUS_DISABLED ))continue ; +local_irq_disable ();try_one_irq (i, desc); +local_irq_enable (); } }