drm/radeon/kms: Report vga connector is connected according to ddc_probe
Subsystems (2)
PATCH 1/1 drm/radeon/kms: Report vga connector is connected according to ddc_probe
On broken EDID we were reporting vga connector to be disconnected even if ddc probe did found a monitor. This patch report that the connector is connected on such case. This allow drm to add a fail safe mode (800x600 at the time of this patch) thus user can boot and later add a mode which match its monitor capabilities.
Signed-off-by Jerome Glisse <[email protected]>
--- drivers/gpu/drm/radeon/radeon_connectors.c | 9 +++++---- 1 files changed, 5 insertions(+), 4 deletions(-)
drivers/gpu/drm/radeon/radeon_connectors.c +5 -4
@@ -566,8 +566,9 @@ static enum drm_connector_status radeon_vga_detect(struct drm_connector *connectradeon_i2c_do_lock (radeon_connector,0 );if (!radeon_connector->edid) { -DRM_ERROR ("DDC responded but not EDID found for %s\n" , -drm_get_connector_name (connector)); +DRM_ERROR ("%s: probed a monitor but no|invalid EDID\n" , +drm_get_connector_name (connector)); + ret = connector_status_connected; }else { radeon_connector->use_digital = !!(radeon_connector->edid->input &DRM_EDID_INPUT_DIGITAL );
@@ -720,8 +721,8 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connectradeon_i2c_do_lock (radeon_connector,0 );if (!radeon_connector->edid) { -DRM_ERROR ("DDC responded but not EDID found for %s\n" , -drm_get_connector_name (connector)); +DRM_ERROR ("%s: probed a monitor but no|invalid EDID\n" , +drm_get_connector_name (connector)); }else { radeon_connector->use_digital = !!(radeon_connector->edid->input &DRM_EDID_INPUT_DIGITAL );
Signature · 1 line
1.6.5.2