scripts: add gen-linux-conf for remote kernel configuration
RFC 1/1 scripts: add gen-linux-conf for remote kernel configuration
The new 'make localmodconfig' proves very useful but on low end systems we do not want to 'git clone' an entire kernel tree or download a whole kernel but just cross compile the kernel on a bigger machine. The .config generated with 'make localmodconfig' is still very helpfup though so to aid users and developers with that add a script which builds a tarball with only the necessary kernel glue stuff to be able to generate a local minimum kernel configuration with 'make localmodconfig'.
With this you can copy to your target device a relatively small tarball (1.2 MB currenty) and, allows you to modify the kernel config for your tree (mconf, conf, etc) and finally run 'make localmodconfig'.
---
I had an itch to scratch and that was to use 'localmodconfig' on a small netbook but I didn't want to clone a whole tree or even compile an entire kernel on it. This did the trick, thought others might find it useful.
A little grimy the bash script, but hey it works and its simple enough. I tried to reduce the Makefile count to only arch/ but found that that didn't do the trick. Perhaps this can be optimized more, suggestions welcomed. Maybe it should be written in Go :)
What would be *real* nice is to give an IP address of a box and have it build and fetch a localmodconfig .config for you.
Luis
scripts/gen-linux-conf | 61 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 61 insertions(+), 0 deletions(-) create mode 100755 scripts/gen-linux-conf
scripts/gen-linux-conf new file +61 -0
@@ -0,0 +1,61 @@ +#!/bin/bash + +DEST=linux-conf +rm -rf $DEST + +KCONFIGS=$(find ./ -type f -name Kconfig\*) +MAKEFILES=$(find ./ -type f -name Makefile\*) +KBUILDS=$(find ./ -type f -name Kbuild\*) + +COUNT=0 +echo -en "\nAdding Kconfigs" +for i in ${KCONFIGS}; do + FILE=$(basename $i) + DIR=$(dirname $i) + DIR=${DEST}/${DIR} + mkdir -p ${DIR} + cp $i ${DIR} + echo -en "." + let COUNT=$COUNT+1 +done +echo "$COUNT files copied" + +COUNT=0 +echo -en "Adding Makefiles" +for i in ${MAKEFILES}; do + FILE=$(basename $i) + DIR=$(dirname $i) + DIR=${DEST}/${DIR} + mkdir -p ${DIR} + cp $i ${DIR} + echo -en "." + let COUNT=$COUNT+1 +done +echo "$COUNT files copied" + +COUNT=0 +echo -en "Adding Kbuild files" +for i in ${KBUILDS}; do + FILE=$(basename $i) + DIR=$(dirname $i) + DIR=${DEST}/${DIR} + mkdir -p ${DIR} + cp $i ${DIR} + echo -en "." + let COUNT=$COUNT+1 +done +echo -e "$COUNT files copied\n" + +cp -af scripts/ ${DEST} +cp -f Makefile ${DEST} + +TARBALL=${DEST}.tar.bz2 + +tar -jcf ${TARBALL} ${DEST} +rm -rf ${DEST} + +echo -e "Finished ${TARBALL} ($(du -h $TARBALL | cut -f 1))" +echo -e "Now scp ${TARBALL} to target and run:\n" +echo -e "cp /boot/your-config .config" +echo -e "make menuconfig" +echo -e "make localmodconfig"
Signature · 1 line
1.6.5.2.155.gbb47
Quoted 27 lines · Luis R. Rodriguez
The new 'make localmodconfig' proves very useful but on low end systems we do not want to 'git clone' an entire kernel tree or download a whole kernel but just cross compile the kernel on a bigger machine. The .config generated with 'make localmodconfig' is still very helpfup though so to aid users and developers with that add a script which builds a tarball with only the necessary kernel glue stuff to be able to generate a local minimum kernel configuration with 'make localmodconfig'.
With this you can copy to your target device a relatively small tarball (1.2 MB currenty) and, allows you to modify the kernel config for your tree (mconf, conf, etc) and finally run 'make localmodconfig'.
Signed-off-by Luis R. Rodriguez <[email protected]>---
I had an itch to scratch and that was to use 'localmodconfig' on a small netbook but I didn't want to clone a whole tree or even compile an entire kernel on it. This did the trick, thought others might find it useful.
A little grimy the bash script, but hey it works and its simple enough. I tried to reduce the
Makefilecount to onlyarch/but found that that didn't do the trick. Perhaps this can be optimized more, suggestions welcomed. Maybe it should be written in Go :)
Quoted 4 lines
What would be *real* nice is to give an IP address of a box and have it build and fetch a localmodconfig .config for you.
Luis
Thanks for posting this.
When I tried this for my netbook, my approach was to copy /proc/modules and /boot/config from the netbook. As a shameless hack, I temporarily bind mounted /proc/modules on the build system. I guess the cleaner way would be to copy the result of "lsmod", and have localmodconfig accept "LSMOD_FILE=file".
Naturally I think my approach is simpler, despite not having actually implemented it properly :). What do you think about it?
Regards
Alan
Quoted 35 lines · Alan Jenkins
Quoted 27 lines · Luis R. Rodriguez
The new 'make localmodconfig' proves very useful but on low end systems we do not want to 'git clone' an entire kernel tree or download a whole kernel but just cross compile the kernel on a bigger machine. The .config generated with 'make localmodconfig' is still very helpfup though so to aid users and developers with that add a script which builds a tarball with only the necessary kernel glue stuff to be able to generate a local minimum kernel configuration with 'make localmodconfig'.
With this you can copy to your target device a relatively small tarball (1.2 MB currenty) and, allows you to modify the kernel config for your tree (mconf, conf, etc) and finally run 'make localmodconfig'.
Signed-off-by Luis R. Rodriguez <[email protected]>---
I had an itch to scratch and that was to use 'localmodconfig' on a small netbook but I didn't want to clone a whole tree or even compile an entire kernel on it. This did the trick, thought others might find it useful.
A little grimy the bash script, but hey it works and its simple enough. I tried to reduce the
Makefilecount to onlyarch/but found that that didn't do the trick. Perhaps this can be optimized more, suggestions welcomed. Maybe it should be written in Go :)Quoted 4 lines
What would be *real* nice is to give an IP address of a box and have it build and fetch a localmodconfig .config for you.
Luis
Thanks for posting this.
Quoted 8 lines
When I tried this for my netbook, my approach was to copy
/proc/modulesand/boot/configfrom the netbook. As a shameless hack, I temporarily bind mounted/proc/moduleson the build system. I guess the cleaner way would be to copy the result of "lsmod", and have localmodconfig accept "LSMOD_FILE=file".Naturally I think my approach is simpler, despite not having actually implemented it properly :). What do you think about it?
It does sound simpler, but you'd still need the netbook's config and upgrade it to the the desired kernel's config, so you'd need to address that too. Just lsmod won't cut it I think.
Luis