OMAP: timekeeping: time should not stop during suspend
Subsystems (2)
PATCH v2 1/1 OMAP: timekeeping: time should not stop during suspend
During suspend, the kernel timekeeping subsystem is shut down. Before suspend and upon resume, it uses a weak function read_persistent_clock() to determine the amount of time that elapsed during suspend.
This function was not implemented on OMAP, so from the timekeeping subsystem perspective (and thus userspace as well) it appeared that no time elapsed during suspend.
This patch uses the 32k sync timer as a the persistent clock the 32k sync timer value converted to seconds.
NOTE: This does *NOT* handle wrapping of the 32k sync timer, so
wrapping of the 32k sync timer during suspend may cause problems. Also, there are not interrupts when the 32k sync timer wraps, so something else has to be done.
---
Since v1 of this patch, the signature of this function changed.
Also note that forthcoming omap_device patches will depend on this function instead of getnstimeofday() since the timekeeping subsystem is suspended when we want to do omap_device timing measurements.
arch/arm/plat-omap/common.c | 19 +++++++++++++++++++ 1 files changed, 19 insertions(+), 0 deletions(-)
arch/arm/plat-omap/common.c +19 -0
@@ -172,6 +172,25 @@ unsigned long long sched_clock(void) clocksource_32k.mult, clocksource_32k.shift); } +/** +* read_persistent_clock - Return time from the persistent clock. +* +* Reads the time from a source which isn't disabled during PM: 32k sync +* Returns a timespec with tv_sec=0 and tv_nsec=0 if unsupported. +* +*/ +void read_persistent_clock (struct timespec *ts) +{ +unsigned long long nsecs; +cycle_t cycles; + + ts->tv_sec = ts->tv_nsec =0 ; + cycles = clocksource_32k.read (&clocksource_32k); + nsecs =clocksource_cyc2ns (cycles, + clocksource_32k.mult, clocksource_32k.shift); +timespec_add_ns (ts, nsecs); +} +static int __init omap_init_clocksource_32k (void ) {static char err[]__initdata =KERN_ERR
Signature · 1 line
1.6.5.1
Quoted 9 lines · Kevin Hilman
During suspend, the kernel timekeeping subsystem is shut down. Before suspend and upon resume, it uses a weak function
read_persistent_clock()to determine the amount of time that elapsed during suspend.This function was not implemented on OMAP, so from the timekeeping subsystem perspective (and thus userspace as well) it appeared that no time elapsed during suspend.
Quoted 7 lines
This patch uses the 32k sync timer as a the persistent clock the 32k sync timer value converted to seconds.
NOTE: This does *NOT* handle wrapping of the 32k sync timer, so
wrapping of the 32k sync timer during suspend may cause problems. Also, there are not interrupts when the 32k sync timer wraps, so something else has to be done.
Kevin, are you planning to queue this in your PM series for the next merge window? In that case Acked-by: Tony Lindgren <[email protected]>
If you want me to queue this as a fix for the -rc series, let me know.
Regards,
Tony
Quoted 49 lines
Reported-by Jon Hunter <[email protected]>Signed-off-by Kevin Hilman <[email protected]>---
Since v1 of this patch, the signature of this function changed.Also note that forthcoming
omap_devicepatches will depend on this function instead ofgetnstimeofday()since the timekeeping subsystem is suspended when we want to doomap_devicetiming measurements.arch/arm/plat-omap/common.c | 19 +++++++++++++++++++ 1 files changed, 19 insertions(+), 0 deletions(-)arch/arm/plat-omap/common.c +19
-0@@ -172,6 +172,25 @@ unsigned long long sched_clock(void) clocksource_32k.mult, clocksource_32k.shift); } +/** +* read_persistent_clock - Return time from the persistent clock. +* +* Reads the time from a source which isn't disabled during PM: 32k sync +* Returns a timespec with tv_sec=0 and tv_nsec=0 if unsupported. +* +*/ +void read_persistent_clock (struct timespec *ts) +{ +unsigned long long nsecs; +cycle_t cycles; + + ts->tv_sec = ts->tv_nsec =0 ; + cycles = clocksource_32k.read (&clocksource_32k); + nsecs =clocksource_cyc2ns (cycles, + clocksource_32k.mult, clocksource_32k.shift); +timespec_add_ns (ts, nsecs); +} +static int __init omap_init_clocksource_32k (void ) {static char err[]__initdata =KERN_ERR Signature · 6 lines
1.6.5.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 18 lines · Tony Lindgren
Quoted 9 lines · Kevin Hilman
During suspend, the kernel timekeeping subsystem is shut down. Before suspend and upon resume, it uses a weak function
read_persistent_clock()to determine the amount of time that elapsed during suspend.This function was not implemented on OMAP, so from the timekeeping subsystem perspective (and thus userspace as well) it appeared that no time elapsed during suspend.
Quoted 7 lines
This patch uses the 32k sync timer as a the persistent clock the 32k sync timer value converted to seconds.
NOTE: This does *NOT* handle wrapping of the 32k sync timer, so
wrapping of the 32k sync timer during suspend may cause problems. Also, there are not interrupts when the 32k sync timer wraps, so something else has to be done.
Quoted 4 lines
Kevin, are you planning to queue this in your PM series for the next merge window? In that case Acked-by: Tony Lindgren <[email protected]>
If you want me to queue this as a fix for the -rc series, let me know.
I'll queue it for next merge window, thanks.
Kevin
Quoted 50 lines
Quoted 50 lines
Reported-by Jon Hunter <[email protected]>Signed-off-by Kevin Hilman <[email protected]>---
Since v1 of this patch, the signature of this function changed.Also note that forthcoming
omap_devicepatches will depend on this function instead ofgetnstimeofday()since the timekeeping subsystem is suspended when we want to doomap_devicetiming measurements.arch/arm/plat-omap/common.c | 19 +++++++++++++++++++ 1 files changed, 19 insertions(+), 0 deletions(-)arch/arm/plat-omap/common.c +19
-0@@ -172,6 +172,25 @@ unsigned long long sched_clock(void) clocksource_32k.mult, clocksource_32k.shift); } +/** +* read_persistent_clock - Return time from the persistent clock. +* +* Reads the time from a source which isn't disabled during PM: 32k sync +* Returns a timespec with tv_sec=0 and tv_nsec=0 if unsupported. +* +*/ +void read_persistent_clock (struct timespec *ts) +{ +unsigned long long nsecs; +cycle_t cycles; + + ts->tv_sec = ts->tv_nsec =0 ; + cycles = clocksource_32k.read (&clocksource_32k); + nsecs =clocksource_cyc2ns (cycles, + clocksource_32k.mult, clocksource_32k.shift); +timespec_add_ns (ts, nsecs); +} +static int __init omap_init_clocksource_32k (void ) {static char err[]__initdata =KERN_ERR Signature · 6 lines
1.6.5.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html