Skip to contentSkip to conversation

S3C64XX SPI: SPI Controller driver for S3C64XX

PATCH In review Jassi Brar 1 participant 1 message Nov 21, 2009

Subsystems (2)
lore
Share & tools
lore

Jassi Brar

author
#0 lore raw

PATCH 5/6 S3C64XX SPI: SPI Controller driver for S3C64XX

Added S3C64XX SPI controller driver.

Each SPI controller has exactly one CS line and as such doesn't provide for multi-cs. We implement a workaround to support multi-cs by _not_ configuring the mux'ed CS pin for each SPI controller. The CS mechanism is assumed to be fully machine specific - the driver doesn't even assume some GPIO pin is used to control the CS.
The driver has been designed to be capable of running SoCs since s3c64xx and till date, for that reason some of the register fields have been passed via, SoC specific, platform data.

Currently. the driver works only in DMA mode. Later choice can be implemented to use DMA or IRQ mode based on the size of xfer and ability to 'dma_map_single'.

---
 drivers/spi/Kconfig       |    7 +
 drivers/spi/Makefile      |    1 +
 drivers/spi/spi_s3c64xx.c | 1036 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/spi/spi_s3c64xx.h |  187 ++++++++
 4 files changed, 1231 insertions(+), 0 deletions(-)
 create mode 100644 drivers/spi/spi_s3c64xx.c
 create mode 100644 drivers/spi/spi_s3c64xx.h
drivers/spi/Kconfig +7 -0
index 2c733c2..5c67e1e 100644
@@ -204,6 +204,13 @@ config SPI_S3C24XX_GPIO
 	  the inbuilt hardware cannot provide the transfer mode, or
 	  where the board is using non hardware connected pins.
 
+config SPI_S3C64XX
+	tristate "Samsung S3C64XX series type SPI"
+	depends on ARCH_S3C64XX && EXPERIMENTAL
+	select S3C64XX_DMA
+	help
+	  SPI driver for Samsung S3C64XX and newer SoCs.
+
 config SPI_SH_SCI
 	tristate "SuperH SCI SPI controller"
 	depends on SUPERH
drivers/spi/Makefile +1 -0
index 3de408d..53452b2 100644
@@ -31,6 +31,7 @@ obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx.o
 obj-$(CONFIG_SPI_TXX9)			+= spi_txx9.o
 obj-$(CONFIG_SPI_XILINX)		+= xilinx_spi.o
 obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.o
+obj-$(CONFIG_SPI_S3C64XX)		+= spi_s3c64xx.o
 # 	... add above this line ...
 
 # SPI protocol drivers (device/link on bus)
drivers/spi/spi_s3c64xx.c new file +1034 -0

1,034 lines not on this page · raw message

drivers/spi/spi_s3c64xx.h new file +187 -0

187 lines not on this page · raw message

Signature · 1 line
1.6.2.5