sfc: Remove redundant writes to INT_ADR_KER
Subsystems (2)
PATCH 1/12 sfc: Remove redundant writes to INT_ADR_KER
This register only needs to be written after reset, not each time we enable interrupts.
Signed-off-by Ben Hutchings <[email protected]>
--- drivers/net/sfc/falcon.c | 15 +++++++-------- 1 files changed, 7 insertions(+), 8 deletions(-)
drivers/net/sfc/falcon.c +7 -8
@@ -1290,19 +1290,11 @@ static inline void falcon_interrupts(struct efx_nic *efx, int enabled,void falcon_enable_interrupts (struct efx_nic *efx) { -efx_oword_t int_adr_reg_ker;struct efx_channel *channel;EFX_ZERO_OWORD (*((efx_oword_t *) efx->irq_status.addr));wmb ();/* Ensure interrupt vector is clear before interrupts enabled */ -/* Program address */ -EFX_POPULATE_OWORD_2 (int_adr_reg_ker, -FRF_AZ_NORM_INT_VEC_DIS_KER , -EFX_INT_MODE_USE_MSI (efx), -FRF_AZ_INT_ADR_KER , efx->irq_status.dma_addr); -efx_writeo (efx, &int_adr_reg_ker,FR_AZ_INT_ADR_KER ); -/* Enable interrupts */ falcon_interrupts (efx,1 ,0 );
@@ -3061,6 +3053,13 @@ int falcon_init_nic(struct efx_nic *efx)EFX_POPULATE_OWORD_1 (temp,FRF_AZ_RX_DC_PF_LWM ,RX_DC_ENTRIES -8 );efx_writeo (efx, &temp,FR_AZ_RX_DC_PF_WM ); +/* Program INT_KER address */ +EFX_POPULATE_OWORD_2 (temp, +FRF_AZ_NORM_INT_VEC_DIS_KER , +EFX_INT_MODE_USE_MSI (efx), +FRF_AZ_INT_ADR_KER , efx->irq_status.dma_addr); +efx_writeo (efx, &temp,FR_AZ_INT_ADR_KER ); +/* Clear the parity enables on the TX data fifos as * they produce false parity errors because of timing issues */
Signature · 9 lines
1.6.5.3 -- Ben Hutchings, Senior Software Engineer, Solarflare Communications Not speaking for my employer; that's the marketing department's job. They asked us to note that Solarflare product names are trademarked.
From: Ben Hutchings <[email protected]>
Date: Sun, 29 Nov 2009 13:42:03 +0000
Quoted 4 lines
This register only needs to be written after reset, not each time we enable interrupts.
Signed-off-by Ben Hutchings <[email protected]>
Applied.