Skip to contentSkip to conversation

gssd: have gssd deal with scopeid field in upcall

PATCH In review Jeff Layton 3 participants 6 messages Dec 8, 2009 – Dec 11, 2009 1 message not in the archive

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 gssd: have gssd deal with scopeid field in upcall

Recent kernels (2.6.32) have started displaying the scopeid for some addresses in the upcall. gssd doesn't know how to deal with them. Change gssd to use getaddrinfo instead of inet_pton since that can deal with scopeid's in addresses. That also allows us to elminate the port conversion in read_service_info.

If getaddrinfo returns an address with a non-zero sin6_scope_id however, reject it. getnameinfo ignores that field and just uses the sin6_addr part when resolving. But, two addresses that differ only in sin6_scope_id could refer to completely different hosts.

---
 utils/gssd/gssd_proc.c |   60 ++++++++++++++++++++++++++++--------------------
 1 files changed, 35 insertions(+), 25 deletions(-)
utils/gssd/gssd_proc.c +35 -25
index 33a31c3..795e06c 100644
@@ -108,7 +108,7 @@ int pollsize;  /* the size of pollaray (in pollfd's) */
 
 /*
  * convert a presentation address string to a sockaddr_storage struct. Returns
- * true on success and false on failure.
+ * true on success or false on failure.
  *
  * Note that we do not populate the sin6_scope_id field here for IPv6 addrs.
  * gssd nececessarily relies on hostname resolution and DNS AAAA records
@@ -120,26 +120,43 @@ int pollsize;  /* the size of pollaray (in pollfd's) */
  * not really feasible at present.
  */
 static int
-addrstr_to_sockaddr(struct sockaddr *sa, const char *addr, const int port)
+addrstr_to_sockaddr(struct sockaddr *sa, const char *node, const char *port)
 {
-	struct sockaddr_in	*s4 = (struct sockaddr_in *) sa;
-#ifdef IPV6_SUPPORTED
-	struct sockaddr_in6	*s6 = (struct sockaddr_in6 *) sa;
-#endif /* IPV6_SUPPORTED */
+	int rc;
+	struct addrinfo *res;
+	struct addrinfo hints = { .ai_flags = AI_NUMERICHOST | AI_NUMERICSERV };
 
-	if (inet_pton(AF_INET, addr, &s4->sin_addr)) {
-		s4->sin_family = AF_INET;
-		s4->sin_port = htons(port);
-#ifdef IPV6_SUPPORTED
-	} else if (inet_pton(AF_INET6, addr, &s6->sin6_addr)) {
-		s6->sin6_family = AF_INET6;
-		s6->sin6_port = htons(port);
+#ifndef IPV6_SUPPORTED
+	hints.ai_family = AF_INET;
 #endif /* IPV6_SUPPORTED */
-	} else {
-		printerr(0, "ERROR: unable to convert %s to address\n", addr);
+
+	rc = getaddrinfo(node, port, &hints, &res);
+	if (rc) {
+		printerr(0, "ERROR: unable to convert %s|%s to sockaddr: %s\n",
+			 node, port, rc == EAI_SYSTEM ? strerror(errno) :
+						gai_strerror(rc));
 		return 0;
 	}
 
+#ifdef IPV6_SUPPORTED
+	/*
+	 * getnameinfo ignores the scopeid. If the address turns out to have
+	 * a non-zero scopeid, we can't use it -- the resolved host might be
+	 * completely different from the one intended.
+	 */
+	if (res->ai_addr->sa_family == AF_INET6) {
+		struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)res->ai_addr;
+		if (sin6->sin6_scope_id) {
+			printerr(0, "ERROR: address %s has non-zero "
+				    "sin6_scope_id!\n", node);
+			freeaddrinfo(res);
+			return 0;
+		}
+	}
+#endif /* IPV6_SUPPORTED */
+
+	memcpy(sa, res->ai_addr, res->ai_addrlen);
+	freeaddrinfo(res);
 	return 1;
 }
 
@@ -197,11 +214,10 @@ read_service_info(char *info_file_name, char **servicename, char **servername,
 	char		program[16];
 	char		version[16];
 	char		protoname[16];
-	char		cb_port[128];
+	char		port[128];
 	char		*p;
 	int		fd = -1;
 	int		numfields;
-	int		port = 0;
 
 	*servicename = *servername = *protocol = NULL;
 
@@ -230,9 +246,9 @@ read_service_info(char *info_file_name, char **servicename, char **servername,
 		goto fail;
 	}
 
-	cb_port[0] = '\0';
+	port[0] = '\0';
 	if ((p = strstr(buf, "port")) != NULL)
-		sscanf(p, "port: %127s\n", cb_port);
+		sscanf(p, "port: %127s\n", port);
 
 	/* check service, program, and version */
 	if (memcmp(service, "nfs", 3) != 0)
@@ -249,12 +265,6 @@ read_service_info(char *info_file_name, char **servicename, char **servername,
 			goto fail;
 	}
 
-	if (cb_port[0] != '\0') {
-		port = atoi(cb_port);
-		if (port < 0 || port > 65535)
-			goto fail;
-	}
-
 	if (!addrstr_to_sockaddr(addr, address, port))
 		goto fail;
 
Signature · 1 line
1.6.5.2
#1 lore raw
Quoted 2 lines · Jeff Layton

Recent kernels (2.6.32) have started displaying the scopeid for some addresses in the upcall.

Does this mean we lost compatibility with old gssd's?

(Would it be better to keep the "address" line the same (if that's the problematic line), and add a new line that old gssd's can avoid?)

Or are the new addresses only going to occur in cases that would have stumped old gssd's anyway? (In which case, how did old gssd's fail?)

--b.

Quoted 131 lines

gssd doesn't know how to deal with them. Change
gssd to use getaddrinfo instead of inet_pton since that can deal with scopeid's in addresses. That also allows us to elminate the port conversion in read_service_info.

If getaddrinfo returns an address with a non-zero sin6_scope_id however, reject it. getnameinfo ignores that field and just uses the sin6_addr part when resolving. But, two addresses that differ only in sin6_scope_id could refer to completely different hosts.

---
 utils/gssd/gssd_proc.c |   60 ++++++++++++++++++++++++++++--------------------
 1 files changed, 35 insertions(+), 25 deletions(-)
utils/gssd/gssd_proc.c +35 -25
index 33a31c3..795e06c 100644
@@ -108,7 +108,7 @@ int pollsize;  /* the size of pollaray (in pollfd's) */
 
 /*
  * convert a presentation address string to a sockaddr_storage struct. Returns
- * true on success and false on failure.
+ * true on success or false on failure.
  *
  * Note that we do not populate the sin6_scope_id field here for IPv6 addrs.
  * gssd nececessarily relies on hostname resolution and DNS AAAA records
@@ -120,26 +120,43 @@ int pollsize;  /* the size of pollaray (in pollfd's) */
  * not really feasible at present.
  */
 static int
-addrstr_to_sockaddr(struct sockaddr *sa, const char *addr, const int port)
+addrstr_to_sockaddr(struct sockaddr *sa, const char *node, const char *port)
 {
-	struct sockaddr_in	*s4 = (struct sockaddr_in *) sa;
-#ifdef IPV6_SUPPORTED
-	struct sockaddr_in6	*s6 = (struct sockaddr_in6 *) sa;
-#endif /* IPV6_SUPPORTED */
+	int rc;
+	struct addrinfo *res;
+	struct addrinfo hints = { .ai_flags = AI_NUMERICHOST | AI_NUMERICSERV };
 
-	if (inet_pton(AF_INET, addr, &s4->sin_addr)) {
-		s4->sin_family = AF_INET;
-		s4->sin_port = htons(port);
-#ifdef IPV6_SUPPORTED
-	} else if (inet_pton(AF_INET6, addr, &s6->sin6_addr)) {
-		s6->sin6_family = AF_INET6;
-		s6->sin6_port = htons(port);
+#ifndef IPV6_SUPPORTED
+	hints.ai_family = AF_INET;
 #endif /* IPV6_SUPPORTED */
-	} else {
-		printerr(0, "ERROR: unable to convert %s to address\n", addr);
+
+	rc = getaddrinfo(node, port, &hints, &res);
+	if (rc) {
+		printerr(0, "ERROR: unable to convert %s|%s to sockaddr: %s\n",
+			 node, port, rc == EAI_SYSTEM ? strerror(errno) :
+						gai_strerror(rc));
 		return 0;
 	}
 
+#ifdef IPV6_SUPPORTED
+	/*
+	 * getnameinfo ignores the scopeid. If the address turns out to have
+	 * a non-zero scopeid, we can't use it -- the resolved host might be
+	 * completely different from the one intended.
+	 */
+	if (res->ai_addr->sa_family == AF_INET6) {
+		struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)res->ai_addr;
+		if (sin6->sin6_scope_id) {
+			printerr(0, "ERROR: address %s has non-zero "
+				    "sin6_scope_id!\n", node);
+			freeaddrinfo(res);
+			return 0;
+		}
+	}
+#endif /* IPV6_SUPPORTED */
+
+	memcpy(sa, res->ai_addr, res->ai_addrlen);
+	freeaddrinfo(res);
 	return 1;
 }
 
@@ -197,11 +214,10 @@ read_service_info(char *info_file_name, char **servicename, char **servername,
 	char		program[16];
 	char		version[16];
 	char		protoname[16];
-	char		cb_port[128];
+	char		port[128];
 	char		*p;
 	int		fd = -1;
 	int		numfields;
-	int		port = 0;
 
 	*servicename = *servername = *protocol = NULL;
 
@@ -230,9 +246,9 @@ read_service_info(char *info_file_name, char **servicename, char **servername,
 		goto fail;
 	}
 
-	cb_port[0] = '\0';
+	port[0] = '\0';
 	if ((p = strstr(buf, "port")) != NULL)
-		sscanf(p, "port: %127s\n", cb_port);
+		sscanf(p, "port: %127s\n", port);
 
 	/* check service, program, and version */
 	if (memcmp(service, "nfs", 3) != 0)
@@ -249,12 +265,6 @@ read_service_info(char *info_file_name, char **servicename, char **servername,
 			goto fail;
 	}
 
-	if (cb_port[0] != '\0') {
-		port = atoi(cb_port);
-		if (port < 0 || port > 65535)
-			goto fail;
-	}
-
 	if (!addrstr_to_sockaddr(addr, address, port))
 		goto fail;
 
Signature · 6 lines
1.6.5.2

--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#2 lore raw
Quoted 4 lines · On Wed, 9 Dec 2009 13:50:50 -0500 "J. Bruce Fields" <[email protected]>…
Quoted 2 lines · Jeff Layton

Recent kernels (2.6.32) have started displaying the scopeid for some addresses in the upcall.

Quoted 8 lines

Does this mean we lost compatibility with old gssd's?

(Would it be better to keep the "address" line the same (if that's the problematic line), and add a new line that old gssd's can avoid?)

Or are the new addresses only going to occur in cases that would have stumped old gssd's anyway? (In which case, how did old gssd's fail?)

The problem is only with IPv6 addresses (obviously) and even then, it only tacks them onto certain addresses -- link-local and site-local addrs. I only happened to notice because I was using a site-local prefix on a private network segment for testing.

IMO, NFS+IPv6+krb5 is new enough that we can just chalk this up to a bug and not worry too much about backward compatibility.

I think the only real kernel changes that we need to consider are:

1) should site-local addresses have a scopeid appended to them at all when displayed in presentation format?

2) should we avoid displaying the scopeid on any address when it's 0?

The RFC's surrounding site-local addresses are very confusing and often contradictory unfortunately so Chuck has been trying to get clarification on the netdev list. They've been deprecated in some later RFC's but we're still a bit unclear on what that means.

Most of the existing code out there seems to treat a zero scopeid and an absent scopeid the same, so I think the answer to #2 should probably be "yes".

Quoted 128 lines
Quoted 128 lines

gssd doesn't know how to deal with them. Change
gssd to use getaddrinfo instead of inet_pton since that can deal with scopeid's in addresses. That also allows us to elminate the port conversion in read_service_info.

If getaddrinfo returns an address with a non-zero sin6_scope_id however, reject it. getnameinfo ignores that field and just uses the sin6_addr part when resolving. But, two addresses that differ only in sin6_scope_id could refer to completely different hosts.

---
 utils/gssd/gssd_proc.c |   60 ++++++++++++++++++++++++++++--------------------
 1 files changed, 35 insertions(+), 25 deletions(-)
utils/gssd/gssd_proc.c +35 -25
index 33a31c3..795e06c 100644
@@ -108,7 +108,7 @@ int pollsize;  /* the size of pollaray (in pollfd's) */
 
 /*
  * convert a presentation address string to a sockaddr_storage struct. Returns
- * true on success and false on failure.
+ * true on success or false on failure.
  *
  * Note that we do not populate the sin6_scope_id field here for IPv6 addrs.
  * gssd nececessarily relies on hostname resolution and DNS AAAA records
@@ -120,26 +120,43 @@ int pollsize;  /* the size of pollaray (in pollfd's) */
  * not really feasible at present.
  */
 static int
-addrstr_to_sockaddr(struct sockaddr *sa, const char *addr, const int port)
+addrstr_to_sockaddr(struct sockaddr *sa, const char *node, const char *port)
 {
-	struct sockaddr_in	*s4 = (struct sockaddr_in *) sa;
-#ifdef IPV6_SUPPORTED
-	struct sockaddr_in6	*s6 = (struct sockaddr_in6 *) sa;
-#endif /* IPV6_SUPPORTED */
+	int rc;
+	struct addrinfo *res;
+	struct addrinfo hints = { .ai_flags = AI_NUMERICHOST | AI_NUMERICSERV };
 
-	if (inet_pton(AF_INET, addr, &s4->sin_addr)) {
-		s4->sin_family = AF_INET;
-		s4->sin_port = htons(port);
-#ifdef IPV6_SUPPORTED
-	} else if (inet_pton(AF_INET6, addr, &s6->sin6_addr)) {
-		s6->sin6_family = AF_INET6;
-		s6->sin6_port = htons(port);
+#ifndef IPV6_SUPPORTED
+	hints.ai_family = AF_INET;
 #endif /* IPV6_SUPPORTED */
-	} else {
-		printerr(0, "ERROR: unable to convert %s to address\n", addr);
+
+	rc = getaddrinfo(node, port, &hints, &res);
+	if (rc) {
+		printerr(0, "ERROR: unable to convert %s|%s to sockaddr: %s\n",
+			 node, port, rc == EAI_SYSTEM ? strerror(errno) :
+						gai_strerror(rc));
 		return 0;
 	}
 
+#ifdef IPV6_SUPPORTED
+	/*
+	 * getnameinfo ignores the scopeid. If the address turns out to have
+	 * a non-zero scopeid, we can't use it -- the resolved host might be
+	 * completely different from the one intended.
+	 */
+	if (res->ai_addr->sa_family == AF_INET6) {
+		struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)res->ai_addr;
+		if (sin6->sin6_scope_id) {
+			printerr(0, "ERROR: address %s has non-zero "
+				    "sin6_scope_id!\n", node);
+			freeaddrinfo(res);
+			return 0;
+		}
+	}
+#endif /* IPV6_SUPPORTED */
+
+	memcpy(sa, res->ai_addr, res->ai_addrlen);
+	freeaddrinfo(res);
 	return 1;
 }
 
@@ -197,11 +214,10 @@ read_service_info(char *info_file_name, char **servicename, char **servername,
 	char		program[16];
 	char		version[16];
 	char		protoname[16];
-	char		cb_port[128];
+	char		port[128];
 	char		*p;
 	int		fd = -1;
 	int		numfields;
-	int		port = 0;
 
 	*servicename = *servername = *protocol = NULL;
 
@@ -230,9 +246,9 @@ read_service_info(char *info_file_name, char **servicename, char **servername,
 		goto fail;
 	}
 
-	cb_port[0] = '\0';
+	port[0] = '\0';
 	if ((p = strstr(buf, "port")) != NULL)
-		sscanf(p, "port: %127s\n", cb_port);
+		sscanf(p, "port: %127s\n", port);
 
 	/* check service, program, and version */
 	if (memcmp(service, "nfs", 3) != 0)
@@ -249,12 +265,6 @@ read_service_info(char *info_file_name, char **servicename, char **servername,
 			goto fail;
 	}
 
-	if (cb_port[0] != '\0') {
-		port = atoi(cb_port);
-		if (port < 0 || port > 65535)
-			goto fail;
-	}
-
 	if (!addrstr_to_sockaddr(addr, address, port))
 		goto fail;
 
Signature · 1 line
1.6.5.2
Signature · 1 line
Jeff Layton <[email protected]>

A message that is not in the archive (sent off-list or not yet received): 20091209141049.61e8fb0b-9yPaYZwiELC+kQycOl6kW4xkIHaj4LzF@public.gmane.org

#4 lore raw
Quoted 16 lines · Jeff Layton
Quoted 4 lines · On Wed, 9 Dec 2009 13:50:50 -0500 "J. Bruce Fields" <[email protected]>…
Quoted 2 lines · Jeff Layton

Recent kernels (2.6.32) have started displaying the scopeid for some addresses in the upcall.

Quoted 8 lines

Does this mean we lost compatibility with old gssd's?

(Would it be better to keep the "address" line the same (if that's the problematic line), and add a new line that old gssd's can avoid?)

Or are the new addresses only going to occur in cases that would have stumped old gssd's anyway? (In which case, how did old gssd's fail?)

Quoted 7 lines

The problem is only with IPv6 addresses (obviously) and even then, it only tacks them onto certain addresses -- link-local and site-local addrs. I only happened to notice because I was using a site-local prefix on a private network segment for testing.

IMO, NFS+IPv6+krb5 is new enough that we can just chalk this up to a bug and not worry too much about backward compatibility.

OK, thanks. So old gssd's couldn't handle context initialization over ipv6 anyway, so there's no regression, as long as they just ignored upcalls with addresses they didn't understand (rather than, say, crashing, or trying to talk to connect to some random address).

--b.

Quoted 148 lines

I think the only real kernel changes that we need to consider are:

1) should site-local addresses have a scopeid appended to them at all when displayed in presentation format?

2) should we avoid displaying the scopeid on any address when it's 0?

The RFC's surrounding site-local addresses are very confusing and often contradictory unfortunately so Chuck has been trying to get clarification on the netdev list. They've been deprecated in some later RFC's but we're still a bit unclear on what that means.

Most of the existing code out there seems to treat a zero scopeid and an absent scopeid the same, so I think the answer to #2 should probably be "yes".

Quoted 128 lines
Quoted 128 lines

gssd doesn't know how to deal with them. Change
gssd to use getaddrinfo instead of inet_pton since that can deal with scopeid's in addresses. That also allows us to elminate the port conversion in read_service_info.

If getaddrinfo returns an address with a non-zero sin6_scope_id however, reject it. getnameinfo ignores that field and just uses the sin6_addr part when resolving. But, two addresses that differ only in sin6_scope_id could refer to completely different hosts.

---
 utils/gssd/gssd_proc.c |   60 ++++++++++++++++++++++++++++--------------------
 1 files changed, 35 insertions(+), 25 deletions(-)
utils/gssd/gssd_proc.c +35 -25
index 33a31c3..795e06c 100644
@@ -108,7 +108,7 @@ int pollsize;  /* the size of pollaray (in pollfd's) */
 
 /*
  * convert a presentation address string to a sockaddr_storage struct. Returns
- * true on success and false on failure.
+ * true on success or false on failure.
  *
  * Note that we do not populate the sin6_scope_id field here for IPv6 addrs.
  * gssd nececessarily relies on hostname resolution and DNS AAAA records
@@ -120,26 +120,43 @@ int pollsize;  /* the size of pollaray (in pollfd's) */
  * not really feasible at present.
  */
 static int
-addrstr_to_sockaddr(struct sockaddr *sa, const char *addr, const int port)
+addrstr_to_sockaddr(struct sockaddr *sa, const char *node, const char *port)
 {
-	struct sockaddr_in	*s4 = (struct sockaddr_in *) sa;
-#ifdef IPV6_SUPPORTED
-	struct sockaddr_in6	*s6 = (struct sockaddr_in6 *) sa;
-#endif /* IPV6_SUPPORTED */
+	int rc;
+	struct addrinfo *res;
+	struct addrinfo hints = { .ai_flags = AI_NUMERICHOST | AI_NUMERICSERV };
 
-	if (inet_pton(AF_INET, addr, &s4->sin_addr)) {
-		s4->sin_family = AF_INET;
-		s4->sin_port = htons(port);
-#ifdef IPV6_SUPPORTED
-	} else if (inet_pton(AF_INET6, addr, &s6->sin6_addr)) {
-		s6->sin6_family = AF_INET6;
-		s6->sin6_port = htons(port);
+#ifndef IPV6_SUPPORTED
+	hints.ai_family = AF_INET;
 #endif /* IPV6_SUPPORTED */
-	} else {
-		printerr(0, "ERROR: unable to convert %s to address\n", addr);
+
+	rc = getaddrinfo(node, port, &hints, &res);
+	if (rc) {
+		printerr(0, "ERROR: unable to convert %s|%s to sockaddr: %s\n",
+			 node, port, rc == EAI_SYSTEM ? strerror(errno) :
+						gai_strerror(rc));
 		return 0;
 	}
 
+#ifdef IPV6_SUPPORTED
+	/*
+	 * getnameinfo ignores the scopeid. If the address turns out to have
+	 * a non-zero scopeid, we can't use it -- the resolved host might be
+	 * completely different from the one intended.
+	 */
+	if (res->ai_addr->sa_family == AF_INET6) {
+		struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)res->ai_addr;
+		if (sin6->sin6_scope_id) {
+			printerr(0, "ERROR: address %s has non-zero "
+				    "sin6_scope_id!\n", node);
+			freeaddrinfo(res);
+			return 0;
+		}
+	}
+#endif /* IPV6_SUPPORTED */
+
+	memcpy(sa, res->ai_addr, res->ai_addrlen);
+	freeaddrinfo(res);
 	return 1;
 }
 
@@ -197,11 +214,10 @@ read_service_info(char *info_file_name, char **servicename, char **servername,
 	char		program[16];
 	char		version[16];
 	char		protoname[16];
-	char		cb_port[128];
+	char		port[128];
 	char		*p;
 	int		fd = -1;
 	int		numfields;
-	int		port = 0;
 
 	*servicename = *servername = *protocol = NULL;
 
@@ -230,9 +246,9 @@ read_service_info(char *info_file_name, char **servicename, char **servername,
 		goto fail;
 	}
 
-	cb_port[0] = '\0';
+	port[0] = '\0';
 	if ((p = strstr(buf, "port")) != NULL)
-		sscanf(p, "port: %127s\n", cb_port);
+		sscanf(p, "port: %127s\n", port);
 
 	/* check service, program, and version */
 	if (memcmp(service, "nfs", 3) != 0)
@@ -249,12 +265,6 @@ read_service_info(char *info_file_name, char **servicename, char **servername,
 			goto fail;
 	}
 
-	if (cb_port[0] != '\0') {
-		port = atoi(cb_port);
-		if (port < 0 || port > 65535)
-			goto fail;
-	}
-
 	if (!addrstr_to_sockaddr(addr, address, port))
 		goto fail;
 
Signature · 1 line
1.6.5.2
Signature · 1 line
Jeff Layton <[email protected]>
#5 lore raw
Quoted 22 lines · On Wed, 9 Dec 2009 15:16:49 -0500 "J. Bruce Fields" <[email protected]>…
Quoted 21 lines · Jeff Layton
Quoted 4 lines · On Wed, 9 Dec 2009 13:50:50 -0500 "J. Bruce Fields" <[email protected]>…
Quoted 2 lines · Jeff Layton

Recent kernels (2.6.32) have started displaying the scopeid for some addresses in the upcall.

Quoted 8 lines

Does this mean we lost compatibility with old gssd's?

(Would it be better to keep the "address" line the same (if that's the problematic line), and add a new line that old gssd's can avoid?)

Or are the new addresses only going to occur in cases that would have stumped old gssd's anyway? (In which case, how did old gssd's fail?)

The problem is only with IPv6 addresses (obviously) and even then, it only tacks them onto certain addresses -- link-local and site-local addrs. I only happened to notice because I was using a site-local prefix on a private network segment for testing.

Quoted 8 lines
Quoted 2 lines

IMO, NFS+IPv6+krb5 is new enough that we can just chalk this up to a bug and not worry too much about backward compatibility.

OK, thanks. So old gssd's couldn't handle context initialization over ipv6 anyway, so there's no regression, as long as they just ignored upcalls with addresses they didn't understand (rather than, say, crashing, or trying to talk to connect to some random address).

gssd has been able to handle context initialization over ipv6 for a few months now (since I did the patches to add IPv6 support to gssd back in April/May. It worked fine with 2.6.30-ish kernels (I think), but some of the kernel code changed here recently (I think in 2.6.32) such that the addresses sent in the upcall sometimes get the scopeid tacked on.

So, there *is* technically a regression here, but it's pretty miminal. You have to:

1) be using IPv6 + NFS + krb5

...and...

2) be using a site-local address prefix, which I think is fec::/10.

...my feeling is that the number of people that are doing both here are so small that it's probably not worth worrying about.

In practice, no distro that I'm aware of is shipping IPv6 enabled nfs-utils yet. The only people who could potentially get burned by this are early adopters who build their own nfs-utils anyway and they should be able to cope with any problems this caused.

Signature · 1 line
Jeff Layton <[email protected]>
#6 lore raw
In reply to Jeff Layton
Quoted 6 lines · Jeff Layton

Recent kernels (2.6.32) have started displaying the scopeid for some addresses in the upcall. gssd doesn't know how to deal with them. Change gssd to use getaddrinfo instead of inet_pton since that can deal with scopeid's in addresses. That also allows us to elminate the port conversion in read_service_info.

Quoted 6 lines

If getaddrinfo returns an address with a non-zero sin6_scope_id however, reject it. getnameinfo ignores that field and just uses the sin6_addr part when resolving. But, two addresses that differ only in sin6_scope_id could refer to completely different hosts.

Committed...

I tested this at the same time at the same time I tested Chuck's mounting patches...

steved.