Fix misspelling of "successful" and variants in comments.
Subsystems (26)
PATCH 3/10 Fix misspelling of "successful" and variants in comments.
Some comments misspell "successful" or variants of the word; this fixes them. No code changes.
Signed-off-by Adam Buchbinder <[email protected]>
--- arch/arm/mach-s3c6400/setup-sdhci.c | 2 +- arch/arm/mach-s3c6410/setup-sdhci.c | 2 +- arch/microblaze/lib/memcpy.c | 2 +- arch/microblaze/lib/memmove.c | 2 +- arch/microblaze/lib/memset.c | 2 +- block/blk-iopoll.c | 2 +- drivers/gpu/drm/drm_crtc.c | 2 +- drivers/media/dvb/dvb-core/dvb_frontend.h | 2 +- drivers/media/dvb/frontends/stb0899_drv.c | 2 +- drivers/mtd/nand/s3c2410.c | 2 +- drivers/net/sfc/falcon.c | 2 +- drivers/net/smsc911x.h | 2 +- drivers/net/ucc_geth.h | 20 ++++++++++---------- drivers/net/wimax/i2400m/rx.c | 2 +- drivers/net/wireless/ath/ath9k/rc.c | 2 +- drivers/net/wireless/rt2x00/rt2x00link.c | 2 +- drivers/net/wireless/rt2x00/rt2x00usb.c | 2 +- drivers/net/wireless/zd1211rw/zd_mac.c | 2 +- drivers/scsi/libfc/fc_lport.c | 2 +- drivers/scsi/libiscsi_tcp.c | 2 +- drivers/scsi/lpfc/lpfc_attr.c | 2 +- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 2 +- drivers/scsi/scsi_netlink.c | 2 +- drivers/scsi/sym53c8xx_2/sym_glue.c | 2 +- drivers/staging/altpciechdma/altpciechdma.c | 6 +++--- drivers/staging/dst/export.c | 2 +- drivers/staging/hv/hv_api.h | 4 ++-- drivers/staging/rar/rar_driver.c | 4 ++-- drivers/staging/rt2860/sta/connect.c | 4 ++-- drivers/staging/rt3090/sta/connect.c | 4 ++-- drivers/staging/sep/sep_driver.c | 2 +- drivers/usb/core/message.c | 2 +- drivers/usb/gadget/pxa27x_udc.c | 2 +- drivers/usb/wusbcore/wa-xfer.c | 4 ++-- drivers/uwb/i1480/dfu/usb.c | 2 +- fs/bio.c | 2 +- fs/dlm/plock.c | 2 +- fs/ocfs2/alloc.c | 2 +- net/mac80211/mesh_pathtbl.c | 2 +- net/wimax/op-reset.c | 2 +- 40 files changed, 56 insertions(+), 56 deletions(-)
arch/arm/mach-s3c6400/setup-sdhci.c +1 -1
@@ -30,7 +30,7 @@ char *s3c6400_hsmmc_clksrcs[4] = { [0] = "hsmmc", [1] = "hsmmc", [2] = "mmc_bus", - /* [3] = "48m", - note not succesfully used yet */ + /* [3] = "48m", - note not successfully used yet */ }; void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
arch/arm/mach-s3c6410/setup-sdhci.c +1 -1
@@ -30,7 +30,7 @@ char *s3c6410_hsmmc_clksrcs[4] = { [0] = "hsmmc", [1] = "hsmmc", [2] = "mmc_bus", -/* [3] = "48m", - note not succesfully used yet */ +/* [3] = "48m", - note not successfully used yet */ };
arch/microblaze/lib/memcpy.c +1 -1
@@ -9,7 +9,7 @@* It is based on demo code originally Copyright 2001 by Intel Corp, taken from * http://www.embedded.com/showArticle.jhtml?articleID205567 * -* Attempts were made, unsuccesfully, to contact the original +* Attempts were made, unsuccessfully, to contact the original * author of this code (Michael Morrow, Intel). Below is the original * copyright notice. *
arch/microblaze/lib/memmove.c +1 -1
@@ -9,7 +9,7 @@* It is based on demo code originally Copyright 2001 by Intel Corp, taken from * http://www.embedded.com/showArticle.jhtml?articleID205567 * -* Attempts were made, unsuccesfully, to contact the original +* Attempts were made, unsuccessfully, to contact the original * author of this code (Michael Morrow, Intel). Below is the original * copyright notice. *
arch/microblaze/lib/memset.c +1 -1
@@ -9,7 +9,7 @@* It is based on demo code originally Copyright 2001 by Intel Corp, taken from * http://www.embedded.com/showArticle.jhtml?articleID205567 * -* Attempts were made, unsuccesfully, to contact the original +* Attempts were made, unsuccessfully, to contact the original * author of this code (Michael Morrow, Intel). Below is the original * copyright notice. *
block/blk-iopoll.c +1 -1
@@ -28,7 +28,7 @@ static DEFINE_PER_CPU(struct list_head, blk_cpu_iopoll);* Description: * Add this blk_iopoll structure to the pending poll list and trigger the * raise of the blk iopoll softirq. The driver must already have gotten a -* succesful return from blk_iopoll_sched_prep() before calling this. +* successful return from blk_iopoll_sched_prep() before calling this. **/ void blk_iopoll_sched (struct blk_iopoll *iop) {
drivers/gpu/drm/drm_crtc.c +1 -1
@@ -2328,7 +2328,7 @@ int drm_mode_connector_property_set_ioctl(struct drm_device *dev, }else if (connector->funcs->set_property) ret = connector->funcs->set_property (connector, property, out_resp->value); -/* store the property value if succesful */ +/* store the property value if successful */ if (!ret)drm_connector_property_set_value (connector, property, out_resp->value); out:
drivers/media/dvb/dvb-core/dvb_frontend.h +1 -1
@@ -160,7 +160,7 @@ struct tuner_state {* search callback possible return status * * DVBFE_ALGO_SEARCH_SUCCESS -* The frontend search algorithm completed and returned succesfully +* The frontend search algorithm completed and returned successfully * * DVBFE_ALGO_SEARCH_ASLEEP * The frontend search algorithm is sleeping
drivers/media/dvb/frontends/stb0899_drv.c +1 -1
@@ -1571,7 +1571,7 @@ static enum dvbfe_search stb0899_search(struct dvb_frontend *fe, struct dvb_fron* stb0899_track * periodically check the signal level against a specified * threshold level and perform derotator centering. -* called once we have a lock from a succesful search +* called once we have a lock from a successful search * event. * * Will be called periodically called to maintain the
drivers/mtd/nand/s3c2410.c +1 -1
@@ -875,7 +875,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,* @info: The controller instance. * @nmtd: The driver version of the MTD instance. * -* This routine is called after the chip probe has succesfully completed +* This routine is called after the chip probe has successfully completed * and the relevant per-chip information updated. This call ensure that * we update the internal state accordingly. *
drivers/net/sfc/falcon.c +1 -1
@@ -1264,7 +1264,7 @@ int falcon_flush_queues(struct efx_nic *efx)msleep (FALCON_FLUSH_INTERVAL );falcon_poll_flush_events (efx); -/* Check if every queue has been succesfully flushed */ +/* Check if every queue has been successfully flushed */ outstanding = false;efx_for_each_tx_queue (tx_queue, efx) outstanding |= !tx_queue->flushed;
drivers/net/smsc911x.h +1 -1
@@ -30,7 +30,7 @@#define SMSC_NAPI_WEIGHT 16/* implements a PHY loopback test at initialisation time, to ensure a packet -* can be succesfully looped back */ +* can be successfully looped back */ #define USE_PHY_WORK_AROUND #define DPRINTK(nlevel, klevel, fmt, args...) \
drivers/net/ucc_geth.h +10 -10
@@ -80,16 +80,16 @@ struct ucc_geth {frames) received that were between 128 (Including FCS length=4) and 255 octets */ u32 txok;/* Total number of octets residing in frames -that where involved in succesfull +that where involved in successful transmission */ u16 txcf;/* Total number of PAUSE control frames transmitted by this MAC */ u8 res4[0x2 ];u32 tmca;/* Total number of frames that were transmitted -succesfully with the group address bit set +successfully with the group address bit set that are not broadcast frames */ u32 tbca;/* Total number of frames transmitted -succesfully that had destination address +successfully that had destination address field equal to the broadcast address */ u32 rxfok;/* Total number of frames received OK */ u32 rxbok;/* Total number of octets received OK */
@@ -98,9 +98,9 @@ struct ucc_geth {HW because it includes octets in frames that never even reach the UCC */ u32 rmca;/* Total number of frames that were received -succesfully with the group address bit set +successfully with the group address bit set that are not broadcast frames */ -u32 rbca;/* Total number of frames received succesfully +u32 rbca;/* Total number of frames received successfully that had destination address equal to the broadcast address */ u32 scar;/* Statistics carry register */
@@ -759,15 +759,15 @@ struct ucc_geth_hardware_statistics {frames) received that were between 128 (Including FCS length=4) and 255 octets */ u32 txok;/* Total number of octets residing in frames -that where involved in succesfull +that where involved in successfull transmission */ u16 txcf;/* Total number of PAUSE control frames transmitted by this MAC */ u32 tmca;/* Total number of frames that were transmitted -succesfully with the group address bit set +successfully with the group address bit set that are not broadcast frames */ u32 tbca;/* Total number of frames transmitted -succesfully that had destination address +successfully that had destination address field equal to the broadcast address */ u32 rxfok;/* Total number of frames received OK */ u32 rxbok;/* Total number of octets received OK */
@@ -776,9 +776,9 @@ struct ucc_geth_hardware_statistics {HW because it includes octets in frames that never even reach the UCC */ u32 rmca;/* Total number of frames that were received -succesfully with the group address bit set +successfully with the group address bit set that are not broadcast frames */ -u32 rbca;/* Total number of frames received succesfully +u32 rbca;/* Total number of frames received successfully that had destination address equal to the broadcast address */ } __attribute__ ((packed));
drivers/net/wimax/i2400m/rx.c +1 -1
@@ -1114,7 +1114,7 @@ error:* device. See the file header for the format. Run all checks on the * buffer header, then run over each payload's descriptors, verify * their consistency and act on each payload's contents. If -* everything is succesful, update the device's statistics. +* everything is successful, update the device's statistics. * * Note: You need to set the skb to contain only the length of the * received buffer; for that, use skb_trim(skb, RECEIVED_SIZE).
drivers/net/wireless/ath/ath9k/rc.c +1 -1
@@ -969,7 +969,7 @@ static bool ath_rc_update_per(struct ath_softc *sc,* Since this probe succeeded, we allow the next * probe twice as soon. This allows the maxRate * to move up faster if the probes are -* succesful. +* successful. */ ath_rc_priv->probe_time now_msec - rate_table->probe_interval / 2;
drivers/net/wireless/rt2x00/rt2x00link.c +1 -1
@@ -279,7 +279,7 @@ void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev,struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;/* -* Frame was received successfully since non-succesfull +* Frame was received successfully since non-successfull * frames would have been dropped by the hardware. */ qual->rx_success++;
drivers/net/wireless/rt2x00/rt2x00usb.c +1 -1
@@ -200,7 +200,7 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)* Obtain the status about this packet. * Note that when the status is 0 it does not mean the * frame was send out correctly. It only means the frame -* was succesfully pushed to the hardware, we have no +* was successfully pushed to the hardware, we have no * way to determine the transmission status right now. * (Only indirectly by looking at the failed TX counters * in the register).
drivers/net/wireless/zd1211rw/zd_mac.c +1 -1
@@ -312,7 +312,7 @@ static void tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,* zd_mac_tx_failed - callback for failed frames * @dev: the mac80211 wireless device * -* This function is called if a frame couldn't be succesfully be +* This function is called if a frame couldn't be successfully be * transferred. The first frame from the tx queue, will be selected and * reported as error to the upper layers. */
drivers/scsi/libfc/fc_lport.c +1 -1
@@ -56,7 +56,7 @@* at the same time. * * When discovery succeeds or fails a callback is made to the lport as -* notification. Currently, succesful discovery causes the lport to take no +* notification. Currently, successful discovery causes the lport to take no * action. A failure will cause the lport to reset. There is likely a circular * locking problem with this implementation. */
drivers/scsi/libiscsi_tcp.c +1 -1
@@ -1004,7 +1004,7 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task)* iscsi_tcp_task_xmit - xmit normal PDU task * @task: iscsi command task * -* We're expected to return 0 when everything was transmitted succesfully, +* We're expected to return 0 when everything was transmitted successfully, * -EAGAIN if there's still data in the queue, or != 0 for any other kind * of error. */
drivers/scsi/lpfc/lpfc_attr.c +1 -1
@@ -3147,7 +3147,7 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr,* sysfs_ctlreg_read - Read method for reading from ctlreg * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. -* @buf: if succesful contains the data from the adapter IOREG space. +* @buf: if successful contains the data from the adapter IOREG space. * @off: offset into buffer to beginning of data. * @count: bytes to transfer. *
drivers/scsi/mpt2sas/mpt2sas_scsih.c +1 -1
@@ -2894,7 +2894,7 @@ _scsih_normalize_sense(char *sense_buffer, struct sense_info *data)#ifdef CONFIG_SCSI_MPT2SAS_LOGGING /** -* _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request +* _scsih_scsi_ioc_info - translated non-successful SCSI_IO request * @ioc: per adapter object * @scmd: pointer to scsi command object * @mpi_reply: reply mf payload returned from firmware
drivers/scsi/scsi_netlink.c +1 -1
@@ -613,7 +613,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_send_transport_msg);* @data_buf: pointer to vendor unique data buffer * * Returns: -* 0 on succesful return +* 0 on successful return * otherwise, failing error code * * Notes:
drivers/scsi/sym53c8xx_2/sym_glue.c +1 -1
@@ -1864,7 +1864,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev)* * This routine is similar to sym_set_workarounds(), except * that, at this point, we already know that the device was -* succesfully intialized at least once before, and so most +* successfully intialized at least once before, and so most * of the steps taken there are un-needed here. */ static void sym2_reset_workarounds (struct pci_dev *pdev)
drivers/staging/altpciechdma/altpciechdma.c +3 -3
@@ -212,7 +212,7 @@ struct ape_dev {int msi_enabled;/* whether this driver could obtain the regions */ int got_regions; -/* irq line succesfully requested by this driver, -1 otherwise */ +/* irq line successfully requested by this driver, -1 otherwise */ int irq_line;/* board revision */ u8 revision;
@@ -336,7 +336,7 @@ static int __devinit map_bars(struct ape_dev *ape, struct pci_dev *dev)printk (KERN_DEBUG "BAR[%d] mapped at 0x%p with length %lu(/%lu).\n" , i, ape->bar[i], bar_min_len[i], bar_length); } -/* succesfully mapped all required BAR regions */ +/* successfully mapped all required BAR regions */ rc =0 ; goto success; fail:
@@ -911,7 +911,7 @@ static int __devinit probe(struct pci_dev *dev, const struct pci_device_id *id)/* perform DMA engines loop back test */ rc =dma_test (ape, dev); (void )rc; -/* succesfully took the device */ +/* successfully took the device */ rc =0 ;printk (KERN_DEBUG "probe() successful.\n" ); goto end;
drivers/staging/dst/export.c +1 -1
@@ -202,7 +202,7 @@ err_out_exit:* so to play good with all cases we just queue BIO into the queue * and wake up processing thread, which gets completed request and * send (encrypting if needed) it back to the client (if it was a read -* request), or sends back reply that writing succesfully completed. +* request), or sends back reply that writing successfully completed. */ static int dst_export_process_request_queue (struct dst_state *st) {
drivers/staging/hv/hv_api.h +2 -2
@@ -316,13 +316,13 @@/* * HV_STATUS_VMX_INSTRUCTION_FAILED -* The requested VMX instruction failed to complete succesfully. +* The requested VMX instruction failed to complete successfully. */ #define HV_STATUS_VMX_INSTRUCTION_FAILED ((u16)0x1011)/* * HV_STATUS_VMX_INSTRUCTION_FAILED_WITH_STATUS -* The requested VMX instruction failed to complete succesfully indicating +* The requested VMX instruction failed to complete successfully indicating * status. */ #define HV_STATUS_VMX_INSTRUCTION_FAILED_WITH_STATUS ((u16)0x1012)
drivers/staging/rar/rar_driver.c +2 -2
@@ -66,7 +66,7 @@ static int __init rar_init_handler(void); static void __exit rar_exit_handler(void);/* -function that is activated on the succesfull probe of the RAR device +function that is activated on the successful probe of the RAR device */ static int __devinit rar_probe (struct pci_dev *pdev,const struct pci_device_id *ent);
@@ -319,7 +319,7 @@ static int memrar_init_rar_params(struct pci_dev *pdev) }/* -function that is activaed on the succesfull probe of the RAR device +function that is activaed on the successful probe of the RAR device */ static int __devinit rar_probe (struct pci_dev *pdev,const struct pci_device_id *ent) {
drivers/staging/rt2860/sta/connect.c +2 -2
@@ -58,8 +58,8 @@ UCHAR CipherSuiteWpaNoneAes[] = { };UCHAR CipherSuiteWpaNoneAesLen = (sizeof (CipherSuiteWpaNoneAes) /sizeof (UCHAR )); -// The following MACRO is called after 1. starting an new IBSS, 2. succesfully JOIN an IBSS, -// or 3. succesfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS +// The following MACRO is called after 1. starting an new IBSS, 2. successfully JOIN an IBSS, +// or 3. successfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS // All settings successfuly negotiated furing MLME state machines become final settings // and are copied to pAd->StaActive #define COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG (_pAd) \
drivers/staging/rt3090/sta/connect.c +2 -2
@@ -60,8 +60,8 @@ UCHAR CipherSuiteWpaNoneAes[] = { };UCHAR CipherSuiteWpaNoneAesLen = (sizeof (CipherSuiteWpaNoneAes) /sizeof (UCHAR )); -// The following MACRO is called after 1. starting an new IBSS, 2. succesfully JOIN an IBSS, -// or 3. succesfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS +// The following MACRO is called after 1. starting an new IBSS, 2. successfully JOIN an IBSS, +// or 3. successfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS // All settings successfuly negotiated furing MLME state machines become final settings // and are copied to pAd->StaActive #define COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG (_pAd) \
drivers/staging/sep/sep_driver.c +1 -1
@@ -2447,7 +2447,7 @@ static void sep_configure_dma_burst(struct sep_device *sep)#endif /* -Function that is activaed on the succesful probe of the SEP device +Function that is activaed on the successful probe of the SEP device */ static int __devinit sep_probe (struct pci_dev *pdev,const struct pci_device_id *ent) {
drivers/usb/core/message.c +1 -1
@@ -1890,7 +1890,7 @@ static void cancel_async_set_config(struct usb_device *udev)* routine gets around the normal restrictions by using a work thread to * submit the change-config request. * -* Returns 0 if the request was succesfully queued, error code otherwise. +* Returns 0 if the request was successfully queued, error code otherwise. * The caller has no way to know whether the queued request will eventually * succeed. */
drivers/usb/gadget/pxa27x_udc.c +1 -1
@@ -1524,7 +1524,7 @@ static int pxa_udc_get_frame(struct usb_gadget *_gadget)* pxa_udc_wakeup - Force udc device out of suspend * @_gadget: usb gadget * -* Returns 0 if succesfull, error code otherwise +* Returns 0 if successful, error code otherwise */ static int pxa_udc_wakeup (struct usb_gadget *_gadget) {
drivers/usb/wusbcore/wa-xfer.c +2 -2
@@ -558,7 +558,7 @@ static void wa_seg_dto_cb(struct urb *urb)/* * Callback for the segment request * -* If succesful transition state (unless already transitioned or +* If successful transition state (unless already transitioned or * outbound transfer); otherwise, take a note of the error, mark this * segment done and try completion. *
@@ -1364,7 +1364,7 @@ segment_aborted:/* * Callback for the IN data phase * -* If succesful transition state; otherwise, take a note of the +* If successful transition state; otherwise, take a note of the * error, mark this segment done and try completion. * * Note we don't access until we are sure that the transfer hasn't
drivers/uwb/i1480/dfu/usb.c +1 -1
@@ -229,7 +229,7 @@ void i1480_usb_neep_cb(struct urb *urb)* will verify it. * * Set i1480->evt_result with the result of getting the event or its -* size (if succesful). +* size (if successful). * * Delivers the data directly to i1480->evt_buf */
fs/bio.c +1 -1
@@ -272,7 +272,7 @@ EXPORT_SYMBOL(bio_init);* for a &struct bio to become free. If a %NULL @bs is passed in, we will * fall back to just using @kmalloc to allocate the required memory. * -* Note that the caller must set ->bi_destructor on succesful return +* Note that the caller must set ->bi_destructor on successful return * of a bio, to do the appropriate freeing of the bio once the reference * count drops to zero. **/
fs/dlm/plock.c +1 -1
@@ -143,7 +143,7 @@ out: }EXPORT_SYMBOL_GPL (dlm_posix_lock); -/* Returns failure iff a succesful lock operation should be canceled */ +/* Returns failure iff a successful lock operation should be canceled */ static int dlm_plock_callback (struct plock_op *op) {struct file *file;
fs/ocfs2/alloc.c +1 -1
@@ -2398,7 +2398,7 @@ static int ocfs2_leftmost_rec_contains(struct ocfs2_extent_list *el, u32 cpos)* * The array is assumed to be large enough to hold an entire path (tree depth). * -* Upon succesful return from this function: +* Upon successful return from this function: * * - The 'right_path' array will contain a path to the leaf block * whose range contains e_cpos.
net/mac80211/mesh_pathtbl.c +1 -1
@@ -530,7 +530,7 @@ static void mesh_path_node_reclaim(struct rcu_head *rp)* @addr: dst address (ETH_ALEN length) * @sdata: local subif * -* Returns: 0 if succesful +* Returns: 0 if successful */ int mesh_path_del (u8 *addr,struct ieee80211_sub_if_data *sdata) {
net/wimax/op-reset.c +1 -1
@@ -62,7 +62,7 @@* Called when wanting to reset the device for any reason. Device is * taken back to power on status. * -* This call blocks; on succesful return, the device has completed the +* This call blocks; on successful return, the device has completed the * reset process and is ready to operate. */ int wimax_reset (struct wimax_dev *wimax_dev)
Signature · 1 line
1.6.3.3
Re: [PATCH 03/10] Fix misspelling of "successful" and variants in
Quoted 2 lines · Adam Buchbinder
Some comments misspell "successful" or variants of the word; this fixes them. No code changes.
Most of this has been already fixed as well. Could you please respin against more recent kernel and resend?
Thanks,
Signature · 2 lines
Jiri Kosina SUSE Labs, Novell Inc.