Fix misspelling of "should" and "shouldn't" in comments.
Subsystems (16)
PATCH 2/2 Fix misspelling of "should" and "shouldn't" in comments.
Some comments misspell "should" or "shouldn't"; this fixes them. No code changes.
Signed-off-by Adam Buchbinder <[email protected]>
--- arch/x86/kernel/ptrace.c | 2 +- drivers/ata/libata-core.c | 2 +- drivers/gpu/drm/radeon/atombios.h | 2 +- drivers/ieee1394/pcilynx.c | 2 +- drivers/input/tablet/aiptek.c | 2 +- drivers/mmc/card/sdio_uart.c | 2 +- drivers/scsi/lpfc/lpfc_scsi.c | 4 ++-- drivers/video/sstfb.c | 2 +- fs/locks.c | 2 +- kernel/audit.c | 2 +- mm/slub.c | 2 +- 11 files changed, 12 insertions(+), 12 deletions(-)
arch/x86/kernel/ptrace.c +1 -1
@@ -604,7 +604,7 @@ ptrace_modify_breakpoint(struct perf_event *bp, int len, int type,struct perf_event_attr attr;/* -* We shoud have at least an inactive breakpoint at this +* We should have at least an inactive breakpoint at this * slot. It means the user is writing dr7 without having * written the address register first */
drivers/ata/libata-core.c +1 -1
@@ -2232,7 +2232,7 @@ retry:* Some drives were very specific about that exact sequence. * * Note that ATA4 says lba is mandatory so the second check -* shoud never trigger. +* should never trigger. */ if (ata_id_major_version (id) <4 || !ata_id_has_lba (id)) { err_mask =ata_dev_init_params (dev, id[3 ], id[6 ]);
drivers/gpu/drm/radeon/atombios.h +1 -1
@@ -2275,7 +2275,7 @@ typedef struct _ATOM_LCD_RTS_RECORD {UCHAR ucRTSValue; }ATOM_LCD_RTS_RECORD ; -/* !! If the record below exits, it shoud always be the first record for easy use in command table!!! */ +/* !! If the record below exits, it should always be the first record for easy use in command table!!! */ typedef struct _ATOM_LCD_MODE_CONTROL_CAP { UCHAR ucRecordType; USHORT usLCDCap;
drivers/ieee1394/pcilynx.c +1 -1
@@ -1452,7 +1452,7 @@ static int __devinit add_card(struct pci_dev *dev,KERN_ERR , lynx->id,"unable to read bus info block from i2c" ); }else {KERN_INFO , lynx->id,"got bus info block from serial eeprom" ); -/* FIXME: probably we shoud rewrite the max_rec, max_ROM(1394a), +/* FIXME: probably we should rewrite the max_rec, max_ROM(1394a), * generation(1394a) and link_spd(1394a) field and recalculate * the CRC */
drivers/input/tablet/aiptek.c +1 -1
@@ -362,7 +362,7 @@ static const int macroKeyEvents[] = { };/*********************************************************************** -* Map values to strings and back. Every map shoudl have the following +* Map values to strings and back. Every map should have the following * as its last element: { NULL, AIPTEK_INVALID_VALUE }. */ #define AIPTEK_INVALID_VALUE -1
drivers/mmc/card/sdio_uart.c +1 -1
@@ -581,7 +581,7 @@ static int uart_carrier_raised(struct tty_port *tport) struct sdio_uart_port *port container_of(tport, struct sdio_uart_port, port);unsigned int ret =sdio_uart_claim_func (port); -if (ret)/* Missing hardware shoudn't block for carrier */ +if (ret)/* Missing hardware shouldn't block for carrier */ return 1 ; ret =sdio_uart_get_mctrl (port);sdio_uart_release_func (port);
drivers/scsi/lpfc/lpfc_scsi.c +2 -2
@@ -1574,7 +1574,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba,case LPFC_PG_TYPE_NO_DIF : num_bde =lpfc_bg_setup_bpl (phba, scsi_cmnd, bpl, datasegcnt); -/* we shoud have 2 or more entries in buffer list */ +/* we should have 2 or more entries in buffer list */ if (num_bde <2 ) goto err;break ;
@@ -1611,7 +1611,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, num_bde =lpfc_bg_setup_bpl_prot (phba, scsi_cmnd, bpl, datasegcnt, protsegcnt); -/* we shoud have 3 or more entries in buffer list */ +/* we should have 3 or more entries in buffer list */ if (num_bde <3 ) goto err;break ;
drivers/video/sstfb.c +1 -1
@@ -1102,7 +1102,7 @@ static void sst_set_vidmod_ics(struct fb_info *info, const int bpp)* detect dac type * prerequisite : write to FbiInitx enabled, video and fbi and pci fifo reset, * dram refresh disabled, FbiInit remaped. -* TODO: mmh.. maybe i shoud put the "prerequisite" in the func ... +* TODO: mmh.. maybe i should put the "prerequisite" in the func ... */
fs/locks.c +1 -1
@@ -1454,7 +1454,7 @@ EXPORT_SYMBOL(generic_setlease);* leases held by processes on this node. * * There is also no break_lease method; filesystems that -* handle their own leases shoud break leases themselves from the +* handle their own leases should break leases themselves from the * filesystem's open, create, and (on truncate) setattr methods. * * Warning: the only current setlease methods exist only to disable
kernel/audit.c +1 -1
@@ -398,7 +398,7 @@ static void kauditd_send_skb(struct sk_buff *skb)skb_get (skb); err =netlink_unicast (audit_sock, skb, audit_nlk_pid,0 );if (err <0 ) { -BUG_ON (err != -ECONNREFUSED );/* Shoudn't happen */ +BUG_ON (err != -ECONNREFUSED );/* Shouldn't happen */ printk (KERN_ERR "audit: *NO* daemon at audit_pid=%d\n" , audit_pid);audit_log_lost ("auditd dissapeared\n" ); audit_pid =0 ;
mm/slub.c +1 -1
@@ -3086,7 +3086,7 @@ static void slab_mem_offline_callback(void *arg)/* * if n->nr_slabs > 0, slabs still exist on the node * that is going down. We were unable to free them, -* and offline_pages() function shoudn't call this +* and offline_pages() function shouldn't call this * callback. So, we must fail. */ BUG_ON (slabs_node (s, offline_node));
Signature · 1 line
1.6.3.3
Jiri Kosina
AppliedRe: [PATCH 2/2] Fix misspelling of "should" and "shouldn't" in
Quoted 1 line · Adam Buchbinder
Some comments misspell "should" or "shouldn't"; this fixes them. No code changes.
Applied, thanks.
Signature · 2 lines
Jiri Kosina SUSE Labs, Novell Inc.