dropped oqo patch series
Subsystems (2)
Len Brown
reviewerPATCH 1/4 platform/x86: Add oqo-wmi driver for model 2 OQO backlight and rfkill control
In reply to Len BrownFrom: Matthew Garrett <[email protected]>
oqo-wmi provides a WMI-based interface to backlight and rfkill control on model 2 OQO devices. It was originally written by Brian Julin (<[email protected]>) - I've ported it to the rfkill layer and tidied it up a little.
--- MAINTAINERS | 5 + drivers/platform/x86/Kconfig | 13 + drivers/platform/x86/Makefile | 1 + drivers/platform/x86/oqo-wmi.c | 941 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 960 insertions(+), 0 deletions(-) create mode 100644 drivers/platform/x86/oqo-wmi.c
MAINTAINERS +5 -0
@@ -3268,6 +3268,11 @@ M: [email protected] L: [email protected] S: Maintained +OQO WMI EXTRAS DRIVER +P: Matthew Garrett +M: [email protected] +S: Maintained + ORACLE CLUSTER FILESYSTEM 2 (OCFS2) P: Mark Fasheh M: [email protected]
drivers/platform/x86/Kconfig +13 -0
@@ -133,6 +133,19 @@ config MSI_LAPTOP If you have an MSI S270 laptop, say Y or M here. +config OQO_WMI + tristate "OQO WMI extras" + depends on ACPI_WMI + depends on INPUT + depends on RFKILL + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to support rfkill and backlight control on + series 2 OQO handheld devices. + + To compile this driver as a module, choose M here: the module will + be called oqo-wmi. + config PANASONIC_LAPTOP tristate "Panasonic Laptop Extras" depends on INPUT && ACPI
drivers/platform/x86/Makefile +1 -0
@@ -13,6 +13,7 @@ obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o obj-$(CONFIG_FUJITSU_LAPTOP) += fujitsu-laptop.o +obj-$(CONFIG_OQO_WMI) += oqo-wmi.o obj-$(CONFIG_PANASONIC_LAPTOP) += panasonic-laptop.o obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o obj-$(CONFIG_ACPI_WMI) += wmi.o
drivers/platform/x86/oqo-wmi.c new file +941 -0
941 lines not on this page · raw message
Signature · 1 line
1.6.0.6
Len Brown
reviewerPATCH 2/4 oqo: dev_set_name()
In reply to Len BrownFrom: Len Brown <[email protected]>
--- drivers/platform/x86/oqo-wmi.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/platform/x86/oqo-wmi.c +1 -1
@@ -592,7 +592,7 @@ static int __devinit oqo_kine_init(void) oqo_kine->absmax[ABS_Y ] = oqo_kine->absmax[ABS_Z ] = oqo_kine->absmax[ABS_MISC ] =32767 ; -memcpy (oqo_kine->dev.bus_id,"kine" ,4 ); +dev_set_name (&oqo_kine->dev,"kine" ); oqo_kine_polled =input_allocate_polled_device ();if (!oqo_kine_polled) {
Signature · 1 line
1.6.0.6
Len Brown
reviewerI'm now deleting the dead branch it lived on.
thanks,
Len Brown, Intel Open Source Technology Center
Len Brown
reviewerPATCH 3/4 x86: oqo: depends on INPUT_POLLDEV
From: Randy Dunlap <[email protected]>
oqo driver uses polled input functions, so make it depend on INPUT_POLLDEV.
ERROR: "input_register_polled_device" [drivers/platform/x86/oqo-wmi.ko] undefined!
ERROR: "input_allocate_polled_device" [drivers/platform/x86/oqo-wmi.ko] undefined!
ERROR: "input_free_polled_device" [drivers/platform/x86/oqo-wmi.ko] undefined!
ERROR: "input_unregister_polled_device" [drivers/platform/x86/oqo-wmi.ko] undefined!
--- drivers/platform/x86/Kconfig | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/platform/x86/Kconfig +1 -1
@@ -136,7 +136,7 @@ config MSI_LAPTOP config OQO_WMI tristate "OQO WMI extras" depends on ACPI_WMI - depends on INPUT + depends on INPUT && INPUT_POLLDEV depends on RFKILL depends on BACKLIGHT_CLASS_DEVICE help
Signature · 1 line
1.6.0.6
Len Brown
reviewerPATCH 4/4 oqo: select INPUT_POLLDEV From: Randy Dunlap <[email protected]>
In reply to Len BrownFrom: Randy Dunlap <[email protected]>
OQO_WMI uses INPUT_POLLDEV, but it can select that instead of depending on it, since it represents library code.
--- drivers/platform/x86/Kconfig | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
drivers/platform/x86/Kconfig +2 -1
@@ -136,9 +136,10 @@ config MSI_LAPTOP config OQO_WMI tristate "OQO WMI extras" depends on ACPI_WMI - depends on INPUT && INPUT_POLLDEV + depends on INPUT depends on RFKILL depends on BACKLIGHT_CLASS_DEVICE + select INPUT_POLLDEV help Say Y here if you want to support rfkill and backlight control on series 2 OQO handheld devices.
Signature · 1 line
1.6.0.6