gpiolib: Add support for WM8350 GPIO controller
Subsystems (3)
PATCH 1/1 gpiolib: Add support for WM8350 GPIO controller
Signed-off-by Mark Brown <[email protected]>
--- drivers/gpio/Kconfig | 7 ++ drivers/gpio/Makefile | 1 + drivers/gpio/wm8350-gpiolib.c | 181 +++++++++++++++++++++++++++++++++++++++ include/linux/mfd/wm8350/core.h | 2 + include/linux/mfd/wm8350/gpio.h | 1 + 5 files changed, 192 insertions(+), 0 deletions(-) create mode 100644 drivers/gpio/wm8350-gpiolib.c
drivers/gpio/Kconfig +7 -0
@@ -162,6 +162,13 @@ config GPIO_WM831X Say yes here to access the GPIO signals of WM831x power management chips from Wolfson Microelectronics. +config GPIO_WM8350 + tristate "WM8350 GPIOs" + depends on MFD_WM8350 + help + Say yes here to access the GPIO signals of WM8350 power management + chips from Wolfson Microelectronics. + config GPIO_ADP5520 tristate "GPIO Support for ADP5520 PMIC" depends on PMIC_ADP5520
drivers/gpio/Makefile +1 -0
@@ -21,3 +21,4 @@ obj-$(CONFIG_GPIO_CS5535) += cs5535-gpio.o obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o +obj-$(CONFIG_GPIO_WM8350) += wm8350-gpiolib.o
drivers/gpio/wm8350-gpiolib.c new file +181 -0
181 lines not on this page · raw message
include/linux/mfd/wm8350/core.h +2 -0
@@ -645,11 +645,13 @@ struct wm8350 {* used by the platform to configure GPIO functions and similar. * @irq_high: Set if WM8350 IRQ is active high. * @irq_base: Base IRQ for genirq (not currently used). +* @gpio_base: Base for gpiolib. */ struct wm8350_platform_data {int (*init)(struct wm8350 *wm8350);int irq_high;int irq_base; +int gpio_base; };
include/linux/mfd/wm8350/gpio.h +1 -0
@@ -29,6 +29,7 @@#define WM8350_GPIO_FUNCTION_SELECT_2 0x8D#define WM8350_GPIO_FUNCTION_SELECT_3 0x8E#define WM8350_GPIO_FUNCTION_SELECT_4 0x8F +#define WM8350_GPIO_LEVEL 0xE6/* * GPIO Functions
Signature · 1 line
1.6.6