Add initial support for Freescale mx51evk board
Subsystems (2)
PATCH v3 11/11 Add initial support for Freescale mx51evk board
The patch adds initial support for the Freescale mx51evk board. Network (FEC) and SD controller (fsl_esdhc) are supported.
--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 4 + board/freescale/mx51evk/Makefile | 48 ++++ board/freescale/mx51evk/config.mk | 25 ++ board/freescale/mx51evk/imximage.cfg | 119 ++++++++++ board/freescale/mx51evk/mx51evk.c | 418 ++++++++++++++++++++++++++++++++++ board/freescale/mx51evk/mx51evk.h | 51 ++++ include/configs/mx51evk.h | 173 ++++++++++++++ 9 files changed, 843 insertions(+), 0 deletions(-) create mode 100644 board/freescale/mx51evk/Makefile create mode 100644 board/freescale/mx51evk/config.mk create mode 100644 board/freescale/mx51evk/imximage.cfg create mode 100644 board/freescale/mx51evk/mx51evk.c create mode 100644 board/freescale/mx51evk/mx51evk.h create mode 100644 include/configs/mx51evk.h
MAINTAINERS +4 -0
@@ -151,6 +151,10 @@ Dave Ellis <[email protected]> SXNI855T MPC8xx +Fred Fan <[email protected]> + + mx51evk i.MX51 + Thomas Frieden <[email protected]> AmigaOneG3SE MPC7xx
MAKEALL +1 -0
@@ -617,6 +617,7 @@ LIST_ARM11=" \ ######################################################################### LIST_ARM_CORTEX_A8=" \ devkit8000 \ + mx51evk \ omap3_beagle \ omap3_overo \ omap3_evm \
Makefile +4 -0
@@ -3267,6 +3267,9 @@ mx31pdk_nand_config : unconfig fi @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 +mx51evk_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51 + omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
@@ -3733,6 +3736,7 @@ clobber: clean $(obj)cscope.* $(obj)*.*~ @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) @rm -f $(obj)u-boot.kwb + @rm -f $(obj)u-boot.imx @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} @rm -f $(obj)cpu/mpc824x/bedbug_603e.c @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
board/freescale/mx51evk/Makefile new file +48 -0
48 lines not on this page · raw message
board/freescale/mx51evk/config.mk new file +25 -0
@@ -0,0 +1,25 @@ +# +# Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +LDSCRIPT = cpu/$(CPU)/$(SOC)/u-boot.lds +TEXT_BASE = 0x97800000 +IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage.cfg
board/freescale/mx51evk/imximage.cfg new file +119 -0
119 lines not on this page · raw message
board/freescale/mx51evk/mx51evk.c new file +418 -0
418 lines not on this page · raw message
board/freescale/mx51evk/mx51evk.h new file +51 -0
51 lines not on this page · raw message
include/configs/mx51evk.h new file +173 -0
173 lines not on this page · raw message
Signature · 1 line
1.6.3.3
PATCH v4 11/11 Add initial support for Freescale mx51evk board
The patch adds initial support for the Freescale mx51evk board. Network (FEC) and SD controller (fsl_esdhc) are supported.
--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 4 + board/freescale/mx51evk/Makefile | 48 ++++ board/freescale/mx51evk/config.mk | 25 ++ board/freescale/mx51evk/imximage.cfg | 119 ++++++++++ board/freescale/mx51evk/mx51evk.c | 406 ++++++++++++++++++++++++++++++++++ board/freescale/mx51evk/mx51evk.h | 51 +++++ include/configs/mx51evk.h | 172 ++++++++++++++ 9 files changed, 830 insertions(+), 0 deletions(-) create mode 100644 board/freescale/mx51evk/Makefile create mode 100644 board/freescale/mx51evk/config.mk create mode 100644 board/freescale/mx51evk/imximage.cfg create mode 100644 board/freescale/mx51evk/mx51evk.c create mode 100644 board/freescale/mx51evk/mx51evk.h create mode 100644 include/configs/mx51evk.h
MAINTAINERS +4 -0
@@ -152,6 +152,10 @@ Dave Ellis <[email protected]> SXNI855T MPC8xx +Fred Fan <[email protected]> + + mx51evk i.MX51 + Thomas Frieden <[email protected]> AmigaOneG3SE MPC7xx
MAKEALL +1 -0
@@ -624,6 +624,7 @@ LIST_ARM11=" \ ######################################################################### LIST_ARM_CORTEX_A8=" \ devkit8000 \ + mx51evk \ omap3_beagle \ omap3_overo \ omap3_evm \
Makefile +4 -0
@@ -3289,6 +3289,9 @@ mx31pdk_nand_config : unconfig fi @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 +mx51evk_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51 + omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
@@ -3760,6 +3763,7 @@ clobber: clean $(obj)cscope.* $(obj)*.*~ @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) @rm -f $(obj)u-boot.kwb + @rm -f $(obj)u-boot.imx @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} @rm -f $(obj)cpu/mpc824x/bedbug_603e.c @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
board/freescale/mx51evk/Makefile new file +48 -0
48 lines not on this page · raw message
board/freescale/mx51evk/config.mk new file +25 -0
@@ -0,0 +1,25 @@ +# +# Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +LDSCRIPT = cpu/$(CPU)/$(SOC)/u-boot.lds +TEXT_BASE = 0x97800000 +IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage.cfg
board/freescale/mx51evk/imximage.cfg new file +119 -0
119 lines not on this page · raw message
board/freescale/mx51evk/mx51evk.c new file +406 -0
406 lines not on this page · raw message
board/freescale/mx51evk/mx51evk.h new file +51 -0
51 lines not on this page · raw message
include/configs/mx51evk.h new file +172 -0
172 lines not on this page · raw message
Signature · 1 line
1.6.3.3
PATCH v5 11/11 Add initial support for Freescale mx51evk board
In reply to Stefano BabicThe patch adds initial support for the Freescale mx51evk board. Network (FEC) and SD controller (fsl_esdhc) are supported.
---
Changes since last version:
Added missing prototype (get_cpu_rev) including sys_proto.h in mx51evk.c
MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 4 + board/freescale/mx51evk/Makefile | 48 ++++ board/freescale/mx51evk/config.mk | 25 ++ board/freescale/mx51evk/imximage.cfg | 119 ++++++++++ board/freescale/mx51evk/mx51evk.c | 407 ++++++++++++++++++++++++++++++++++ board/freescale/mx51evk/mx51evk.h | 51 +++++ include/configs/mx51evk.h | 172 ++++++++++++++ 9 files changed, 831 insertions(+), 0 deletions(-) create mode 100644 board/freescale/mx51evk/Makefile create mode 100644 board/freescale/mx51evk/config.mk create mode 100644 board/freescale/mx51evk/imximage.cfg create mode 100644 board/freescale/mx51evk/mx51evk.c create mode 100644 board/freescale/mx51evk/mx51evk.h create mode 100644 include/configs/mx51evk.h
MAINTAINERS +4 -0
@@ -150,6 +150,10 @@ Dave Ellis <[email protected]> SXNI855T MPC8xx +Fred Fan <[email protected]> + + mx51evk i.MX51 + Thomas Frieden <[email protected]> AmigaOneG3SE MPC7xx
MAKEALL +1 -0
@@ -632,6 +632,7 @@ LIST_ARM11=" \ ######################################################################### LIST_ARM_CORTEX_A8=" \ devkit8000 \ + mx51evk \ omap3_beagle \ omap3_overo \ omap3_evm \
Makefile +4 -0
@@ -3303,6 +3303,9 @@ mx31pdk_nand_config : unconfig fi @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 +mx51evk_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51 + omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
@@ -3774,6 +3777,7 @@ clobber: clean $(obj)cscope.* $(obj)*.*~ @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) @rm -f $(obj)u-boot.kwb + @rm -f $(obj)u-boot.imx @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} @rm -f $(obj)cpu/mpc824x/bedbug_603e.c @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
board/freescale/mx51evk/Makefile new file +48 -0
48 lines not on this page · raw message
board/freescale/mx51evk/config.mk new file +25 -0
@@ -0,0 +1,25 @@ +# +# Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +LDSCRIPT = cpu/$(CPU)/$(SOC)/u-boot.lds +TEXT_BASE = 0x97800000 +IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage.cfg
board/freescale/mx51evk/imximage.cfg new file +119 -0
119 lines not on this page · raw message
board/freescale/mx51evk/mx51evk.c new file +407 -0
407 lines not on this page · raw message
board/freescale/mx51evk/mx51evk.h new file +51 -0
51 lines not on this page · raw message
include/configs/mx51evk.h new file +172 -0
172 lines not on this page · raw message
Signature · 1 line
1.6.3.3
PATCH v6 11/11 Add initial support for Freescale mx51evk board
In reply to Stefano BabicThe patch adds initial support for the Freescale mx51evk board. Network (FEC) and SD controller (fsl_esdhc) are supported.
---
Changes since last version:
Moved is_soc_rev() to soc specific code (removed from mx51evk.c)
MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 4 + board/freescale/mx51evk/Makefile | 48 ++++ board/freescale/mx51evk/config.mk | 25 +++ board/freescale/mx51evk/imximage.cfg | 119 ++++++++++ board/freescale/mx51evk/mx51evk.c | 397 ++++++++++++++++++++++++++++++++++ board/freescale/mx51evk/mx51evk.h | 51 +++++ include/configs/mx51evk.h | 172 +++++++++++++++ 9 files changed, 821 insertions(+), 0 deletions(-) create mode 100644 board/freescale/mx51evk/Makefile create mode 100644 board/freescale/mx51evk/config.mk create mode 100644 board/freescale/mx51evk/imximage.cfg create mode 100644 board/freescale/mx51evk/mx51evk.c create mode 100644 board/freescale/mx51evk/mx51evk.h create mode 100644 include/configs/mx51evk.h
MAINTAINERS +4 -0
@@ -150,6 +150,10 @@ Dave Ellis <[email protected]> SXNI855T MPC8xx +Fred Fan <[email protected]> + + mx51evk i.MX51 + Thomas Frieden <[email protected]> AmigaOneG3SE MPC7xx
MAKEALL +1 -0
@@ -632,6 +632,7 @@ LIST_ARM11=" \ ######################################################################### LIST_ARM_CORTEX_A8=" \ devkit8000 \ + mx51evk \ omap3_beagle \ omap3_overo \ omap3_evm \
Makefile +4 -0
@@ -3303,6 +3303,9 @@ mx31pdk_nand_config : unconfig fi @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 +mx51evk_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51 + omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
@@ -3774,6 +3777,7 @@ clobber: clean $(obj)cscope.* $(obj)*.*~ @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) @rm -f $(obj)u-boot.kwb + @rm -f $(obj)u-boot.imx @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} @rm -f $(obj)cpu/mpc824x/bedbug_603e.c @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
board/freescale/mx51evk/Makefile new file +48 -0
48 lines not on this page · raw message
board/freescale/mx51evk/config.mk new file +25 -0
@@ -0,0 +1,25 @@ +# +# Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +LDSCRIPT = cpu/$(CPU)/$(SOC)/u-boot.lds +TEXT_BASE = 0x97800000 +IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage.cfg
board/freescale/mx51evk/imximage.cfg new file +119 -0
119 lines not on this page · raw message
board/freescale/mx51evk/mx51evk.c new file +397 -0
397 lines not on this page · raw message
board/freescale/mx51evk/mx51evk.h new file +51 -0
51 lines not on this page · raw message
include/configs/mx51evk.h new file +172 -0
172 lines not on this page · raw message
Signature · 1 line
1.6.3.3