fsl-ddr: Fix the turnaround timing for TIMING_CFG_4
PATCH 1/2 fsl-ddr: Fix the turnaround timing for TIMING_CFG_4
Read-to-read/Write-to-write turnaround for same chip select of DDR3 memory, BL/2+2 cycles is enough for them at BC4 and OTF case, BL/2 cycles is enough for fixed BL8. Cutting down the turnaround from BL/2+4 to BL/2+2 or BL/2 will improve the memory performance.
Signed-off-by Dave Liu <[email protected]>
--- cpu/mpc8xxx/ddr/ctrl_regs.c | 17 ++++++++++++----- 1 files changed, 12 insertions(+), 5 deletions(-)
cpu/mpc8xxx/ddr/ctrl_regs.c +12 -5
@@ -939,7 +939,8 @@ static void set_ddr_init_ext_addr(fsl_ddr_cfg_regs_t *ddr) }/* DDR SDRAM Timing Configuration 4 (TIMING_CFG_4) */ -static void set_timing_cfg_4 (fsl_ddr_cfg_regs_t *ddr) +static void set_timing_cfg_4 (fsl_ddr_cfg_regs_t *ddr, +const memctl_options_t *popts) {unsigned int rwt =0 ;/* Read-to-write turnaround for same CS */ unsigned int wrt =0 ;/* Write-to-read turnaround for same CS */
@@ -948,9 +949,15 @@ static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr)unsigned int dll_lock =0 ;/* DDR SDRAM DLL Lock Time */ #if defined(CONFIG_FSL_DDR3 ) -/* We need set BL/2 + 4 for BC4 or OTF */ - rrt =4 ;/* BL/2 + 4 clocks */ - wwt =4 ;/* BL/2 + 4 clocks */ +if (popts->burst_length ==DDR_BL8 ) { +/* We set BL/2 for fixed BL8 */ + rrt =0 ;/* BL/2 clocks */ + wwt =0 ;/* BL/2 clocks */ + }else { +/* We need to set BL/2 + 2 to BC4 and OTF */ + rrt =2 ;/* BL/2 + 2 clocks */ + wwt =2 ;/* BL/2 + 2 clocks */ + } dll_lock =1 ;/* tDLLK = 512 clocks from spec */ #endif ddr->timing_cfg_4 = (0
@@ -1348,7 +1355,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,set_ddr_sdram_clk_cntl (ddr, popts);set_ddr_init_addr (ddr);set_ddr_init_ext_addr (ddr); -set_timing_cfg_4 (ddr); +set_timing_cfg_4 (ddr, popts);set_timing_cfg_5 (ddr);set_ddr_zq_cntl (ddr, zq_en);
Signature · 1 line
1.6.4