Additional PCI id for sunxvr500 driver
PATCH 1/1 Additional PCI id for sunxvr500 driver
Intergraph bought 3D Labs and some XVR-500 chips have Intergraph's vendor id.
---
Jurij Smakov wrote on 2008-12-01:
Quoted 6 lines
Hi,
My SunBlade 1000 has the following graphics chip:
0000:00:01.0 VGA compatible controller: Intergraph Corporation Sun Expert3D-Lite Graphics Accelerator
Quoted 10 lines
with PCI ID 1091:07a0 (vendor ID is Intergraph Corporation). I've noticed that XVR-500 framebuffer driver (
drivers/video/sunxvr500.c) supports the framebuffer device 3d3d:07a0, which only has the same device ID but a different vendor (3D Labs). Given that 3D Labs bought up Intergraph Corporation at some point, it's probably the same chip, so I tried adding 1091:07a0 to the list of supported PCI IDs forsunxvr500.cand it worked without problems, the console now is much nicer than the default PROM monochrome one. Please consider applying the included patch, which adds this card to the list of supported devices for XVR-500 driver.
Jurij originally posted a patch for sunxvr500 which also touched pci_ids.h. This is the same thing without involving pci_ids.h.
Ben.
---
drivers/video/sunxvr500.c +1 -0
@@ -400,6 +400,7 @@static struct pci_device_id e3d_pci_table[] = { {PCI_DEVICE (PCI_VENDOR_ID_3DLABS ,0x7a0 ), }, + {PCI_DEVICE (0x1091 ,0x7a0 ), }, {PCI_DEVICE (PCI_VENDOR_ID_3DLABS ,0x7a2 ), }, { .vendor =PCI_VENDOR_ID_3DLABS , .device =PCI_ANY_ID ,
Signature · 2 lines
Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.
David Miller
AppliedFrom: Ben Hutchings <[email protected]>
Date: Fri, 19 Feb 2010 02:56:21 +0000
Quoted 6 lines
Intergraph bought 3D Labs and some XVR-500 chips have Intergraph's vendor id.
Reported-by Jurij Smakov <[email protected]>Signed-off-by Ben Hutchings <[email protected]>
Applied, thanks Ben.