Skip to contentSkip to conversation

WM8750: Convert to new API

PATCH In review Marek Vasut 3 participants 6 messages Mar 26, 2010 – Apr 4, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 WM8750: Convert to new API

Register the WM8750 as a SPI or I2C device. This patch mostly shuffles code around. Hugely inspired by WM8753 which was already converted.

---
 sound/soc/codecs/wm8750.c |  297 +++++++++++++++++++++------------------------
 1 files changed, 140 insertions(+), 157 deletions(-)
sound/soc/codecs/wm8750.c +140 -157
index ee08408..f01513e 100644
@@ -29,11 +29,6 @@
 
 #include "wm8750.h"
 
-/* codec private data */
-struct wm8750_priv {
-	unsigned int sysclk;
-};
-
 /*
  * wm8750 register cache
  * We can't read the WM8750 register space when we
@@ -53,6 +48,13 @@ static const u16 wm8750_reg[] = {
 	0x0079, 0x0079, 0x0079,          /* 40 */
 };
 
+/* codec private data */
+struct wm8750_priv {
+	unsigned int sysclk;
+	struct snd_soc_codec codec;
+	u16 reg_cache[ARRAY_SIZE(wm8750_reg)];
+};
+
 #define wm8750_reset(c)	snd_soc_write(c, WM8750_RESET, 0)
 
 /*
@@ -695,25 +697,90 @@ static int wm8750_resume(struct platform_device *pdev)
 	return 0;
 }
 
+static struct snd_soc_codec *wm8750_codec;
+
+static int wm8750_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (!wm8750_codec) {
+		dev_err(&pdev->dev, "WM8750 codec not yet registered\n");
+		return -EINVAL;
+	}
+
+	socdev->card->codec = wm8750_codec;
+	codec = wm8750_codec;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		printk(KERN_ERR "wm8750: failed to create pcms\n");
+		goto err;
+	}
+
+	snd_soc_add_controls(codec, wm8750_snd_controls,
+				ARRAY_SIZE(wm8750_snd_controls));
+	wm8750_add_widgets(codec);
+
+	return 0;
+
+err:
+	return ret;
+}
+
+/* power down chip */
+static int wm8750_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8750 = {
+	.probe = 	wm8750_probe,
+	.remove = 	wm8750_remove,
+	.suspend = 	wm8750_suspend,
+	.resume =	wm8750_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8750);
+
 /*
  * initialise the WM8750 driver
  * register the mixer and dsp interfaces with the kernel
  */
-static int wm8750_init(struct snd_soc_device *socdev,
-		       enum snd_soc_control_type control)
+static int wm8750_register(struct wm8750_priv *wm8750,
+			enum snd_soc_control_type control)
 {
-	struct snd_soc_codec *codec = socdev->card->codec;
+	struct snd_soc_codec *codec = &wm8750->codec;
 	int reg, ret = 0;
 
+	if (wm8750_codec) {
+		dev_err(codec->dev, "Multiple WM8750 devices not supported\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
 	codec->name = "WM8750";
 	codec->owner = THIS_MODULE;
+	codec->bias_level = SND_SOC_BIAS_STANDBY;
 	codec->set_bias_level = wm8750_set_bias_level;
 	codec->dai = &wm8750_dai;
 	codec->num_dai = 1;
-	codec->reg_cache_size = ARRAY_SIZE(wm8750_reg);
-	codec->reg_cache = kmemdup(wm8750_reg, sizeof(wm8750_reg), GFP_KERNEL);
-	if (codec->reg_cache == NULL)
-		return -ENOMEM;
+	codec->private_data = wm8750;
+	codec->reg_cache_size = ARRAY_SIZE(wm8750->reg_cache) + 1;
+	codec->reg_cache = &wm8750->reg_cache;
+	codec->private_data = wm8750;
+
+	memcpy(codec->reg_cache, wm8750_reg, sizeof(wm8750->reg_cache));
 
 	ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
 	if (ret < 0) {
@@ -727,13 +794,6 @@ static int wm8750_init(struct snd_soc_device *socdev,
 		goto err;
 	}
 
-	/* register pcms */
-	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
-	if (ret < 0) {
-		printk(KERN_ERR "wm8750: failed to create pcms\n");
-		goto err;
-	}
-
 	/* charge output caps */
 	wm8750_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
@@ -755,19 +815,37 @@ static int wm8750_init(struct snd_soc_device *socdev,
 	reg = snd_soc_read(codec, WM8750_RINVOL);
 	snd_soc_write(codec, WM8750_RINVOL, reg | 0x0100);
 
-	snd_soc_add_controls(codec, wm8750_snd_controls,
-				ARRAY_SIZE(wm8750_snd_controls));
-	wm8750_add_widgets(codec);
-	return ret;
+	wm8750_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		goto err;
+	}
 
+	ret = snd_soc_register_dais(&wm8750_dai, 1);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAIs: %d\n", ret);
+		goto err_codec;
+	}
+
+	return 0;
+
+err_codec:
+	snd_soc_unregister_codec(codec);
 err:
-	kfree(codec->reg_cache);
+	kfree(wm8750);
 	return ret;
 }
 
-/* If the i2c layer weren't so broken, we could pass this kind of data
-   around */
-static struct snd_soc_device *wm8750_socdev;
+static void wm8750_unregister(struct wm8750_priv *wm8750)
+{
+	wm8750_set_bias_level(&wm8750->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dais(&wm8750_dai, 1);
+	snd_soc_unregister_codec(&wm8750->codec);
+	kfree(wm8750);
+	wm8750_codec = NULL;
+}
 
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 
@@ -781,24 +859,26 @@ static struct snd_soc_device *wm8750_socdev;
 static int wm8750_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
-	struct snd_soc_device *socdev = wm8750_socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
-	int ret;
+	struct snd_soc_codec *codec;
+	struct wm8750_priv *wm8750;
 
-	i2c_set_clientdata(i2c, codec);
-	codec->control_data = i2c;
+	wm8750 = kzalloc(sizeof(struct wm8750_priv), GFP_KERNEL);
+	if (wm8750 == NULL)
+		return -ENOMEM;
 
-	ret = wm8750_init(socdev, SND_SOC_I2C);
-	if (ret < 0)
-		pr_err("failed to initialise WM8750\n");
+        codec = &wm8750->codec;
+        codec->control_data = i2c;
+        i2c_set_clientdata(i2c, wm8750);
 
-	return ret;
+        codec->dev = &i2c->dev;
+
+	return wm8750_register(wm8750, SND_SOC_I2C);
 }
 
 static int wm8750_i2c_remove(struct i2c_client *client)
 {
-	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-	kfree(codec->reg_cache);
+        struct wm8750_priv *wm8750 = i2c_get_clientdata(client);
+        wm8750_unregister(wm8750);
 	return 0;
 }
 
@@ -817,66 +897,31 @@ static struct i2c_driver wm8750_i2c_driver = {
 	.remove =   wm8750_i2c_remove,
 	.id_table = wm8750_i2c_id,
 };
-
-static int wm8750_add_i2c_device(struct platform_device *pdev,
-				 const struct wm8750_setup_data *setup)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-	int ret;
-
-	ret = i2c_add_driver(&wm8750_i2c_driver);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "can't add i2c driver\n");
-		return ret;
-	}
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = setup->i2c_address;
-	strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(setup->i2c_bus);
-	if (!adapter) {
-		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
-			setup->i2c_bus);
-		goto err_driver;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
-			(unsigned int)info.addr);
-		goto err_driver;
-	}
-
-	return 0;
-
-err_driver:
-	i2c_del_driver(&wm8750_i2c_driver);
-	return -ENODEV;
-}
 #endif
 
 #if defined(CONFIG_SPI_MASTER)
 static int __devinit wm8750_spi_probe(struct spi_device *spi)
 {
-	struct snd_soc_device *socdev = wm8750_socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
-	int ret;
+	struct snd_soc_codec *codec;
+	struct wm8750_priv *wm8750;
+
+	wm8750 = kzalloc(sizeof(struct wm8750_priv), GFP_KERNEL);
+	if (wm8750 == NULL)
+		return -ENOMEM;
 
+	codec = &wm8750->codec;
 	codec->control_data = spi;
+	codec->dev = &spi->dev;
 
-	ret = wm8750_init(socdev, SND_SOC_SPI);
-	if (ret < 0)
-		dev_err(&spi->dev, "failed to initialise WM8750\n");
+	dev_set_drvdata(&spi->dev, wm8750);
 
-	return ret;
+	return wm8750_register(wm8750, SND_SOC_SPI);
 }
 
 static int __devexit wm8750_spi_remove(struct spi_device *spi)
 {
+	struct wm8750_priv *wm8750 = dev_get_drvdata(&spi->dev);
+	wm8750_unregister(wm8750);
 	return 0;
 }
 
@@ -891,93 +936,31 @@ static struct spi_driver wm8750_spi_driver = {
 };
 #endif
 
-static int wm8750_probe(struct platform_device *pdev)
+static int __init wm8750_modinit(void)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct wm8750_setup_data *setup = socdev->codec_data;
-	struct snd_soc_codec *codec;
-	struct wm8750_priv *wm8750;
 	int ret;
-
-	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
-	if (codec == NULL)
-		return -ENOMEM;
-
-	wm8750 = kzalloc(sizeof(struct wm8750_priv), GFP_KERNEL);
-	if (wm8750 == NULL) {
-		kfree(codec);
-		return -ENOMEM;
-	}
-
-	codec->private_data = wm8750;
-	socdev->card->codec = codec;
-	mutex_init(&codec->mutex);
-	INIT_LIST_HEAD(&codec->dapm_widgets);
-	INIT_LIST_HEAD(&codec->dapm_paths);
-	wm8750_socdev = socdev;
-
-	ret = -ENODEV;
-
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-	if (setup->i2c_address) {
-		ret = wm8750_add_i2c_device(pdev, setup);
-	}
+	ret = i2c_add_driver(&wm8750_i2c_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM8750 I2C driver: %d\n", ret);
 #endif
 #if defined(CONFIG_SPI_MASTER)
-	if (setup->spi) {
-		ret = spi_register_driver(&wm8750_spi_driver);
-		if (ret != 0)
-			printk(KERN_ERR "can't add spi driver");
-	}
+	ret = spi_register_driver(&wm8750_spi_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM8750 SPI driver: %d\n", ret);
 #endif
-
-	if (ret != 0) {
-		kfree(codec->private_data);
-		kfree(codec);
-	}
-	return ret;
+	return 0;
 }
+module_init(wm8750_modinit);
 
-/* power down chip */
-static int wm8750_remove(struct platform_device *pdev)
+static void __exit wm8750_exit(void)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec = socdev->card->codec;
-
-	if (codec->control_data)
-		wm8750_set_bias_level(codec, SND_SOC_BIAS_OFF);
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-	i2c_unregister_device(codec->control_data);
 	i2c_del_driver(&wm8750_i2c_driver);
 #endif
 #if defined(CONFIG_SPI_MASTER)
 	spi_unregister_driver(&wm8750_spi_driver);
 #endif
-	kfree(codec->private_data);
-	kfree(codec);
-
-	return 0;
-}
-
-struct snd_soc_codec_device soc_codec_dev_wm8750 = {
-	.probe = 	wm8750_probe,
-	.remove = 	wm8750_remove,
-	.suspend = 	wm8750_suspend,
-	.resume =	wm8750_resume,
-};
-EXPORT_SYMBOL_GPL(soc_codec_dev_wm8750);
-
-static int __init wm8750_modinit(void)
-{
-	return snd_soc_register_dai(&wm8750_dai);
-}
-module_init(wm8750_modinit);
-
-static void __exit wm8750_exit(void)
-{
-	snd_soc_unregister_dai(&wm8750_dai);
 }
 module_exit(wm8750_exit);
 
Signature · 1 line
1.7.0
Acked-by on v1 1/1
#1 lore raw
Quoted 7 lines · Marek Vasut

Register the WM8750 as a SPI or I2C device. This patch mostly shuffles code around. Hugely inspired by WM8753 which was already converted.

---
 sound/soc/codecs/wm8750.c |  297 +++++++++++++++++++++------------------------
 1 files changed, 140 insertions(+), 157 deletions(-)
Signature · 3 lines
Freelance Developer, SlimLogic Ltd
ASoC and Voltage Regulator Maintainer.
http://www.slimlogic.co.uk
#2 lore raw
In reply to Marek Vasut
Quoted 4 lines · Marek Vasut

Register the WM8750 as a SPI or I2C device. This patch mostly shuffles code around. Hugely inspired by WM8753 which was already converted.

This all looks good but we need the machine driver updates pulling out the registration too. Like I say, wm8731 had the same problem.

The use of snd_soc_register_dais() with just one DAI is a bit odd but not a problem.

#3 lore raw

Dne Po 29. března 2010 14:48:09 Mark Brown napsal(a):

Quoted 12 lines · Marek Vasut
Quoted 4 lines

Register the WM8750 as a SPI or I2C device. This patch mostly shuffles code around. Hugely inspired by WM8753 which was already converted.

This all looks good but we need the machine driver updates pulling out the registration too. Like I say, wm8731 had the same problem.

The use of snd_soc_register_dais() with just one DAI is a bit odd but not a problem.

ok, shall I send that in another patch and CC linux-arm ?
_______________________________________________
Alsa-devel mailing list [email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#4 lore raw
Quoted 1 line · Marek Vasut

ok, shall I send that in another patch and CC linux-arm ?

It should be merged into the same patch but yes, or to mitigate against merge issues you could do the registration in the ASoC machine drivers then merge to arch/arm in a second round later.

#5 lore raw

Dne Út 30. března 2010 11:40:43 Mark Brown napsal(a):

Quoted 7 lines · Marek Vasut
Quoted 1 line

ok, shall I send that in another patch and CC linux-arm ?

It should be merged into the same patch but yes, or to mitigate against merge issues you could do the registration in the ASoC machine drivers then merge to arch/arm in a second round later.

I'll send two patches and we can push them both through alsa. I doubt anyone will have problems with the arm stuff, those are not too used platform. As for the Z, I know the people who work on it so it should be fine.

Could you push this patch? I'll supply the rest tonight.

Cheers
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel