USB: pxa27x_udc: use four bits to store endpoint addresses
PATCH 1/1 USB: pxa27x_udc: use four bits to store endpoint addresses
Endpoint addresses on pxa27x can be programmed as 1-15, but since only three bits were being used to store the endpoint number it was possible to overflow.
Signed-off-by Matt Reimer <[email protected]>
--- drivers/usb/gadget/pxa27x_udc.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/usb/gadget/pxa27x_udc.h +1 -1
@@ -360,7 +360,7 @@ struct pxa_ep {* Specific pxa endpoint data, needed for hardware initialization */ unsigned dir_in:1; - unsigned addr:3; + unsigned addr:4; unsigned config:2; unsigned interface:3; unsigned alternate:3;
Signature · 1 line
1.6.3.3