help to recovering my home volume
Hello,
First, sorry for my english.
The other day, I wanted to create a multi-iso usb (for install- party) but I stupidly copied the image on my main hard drive.
When I have seen my error, I have stop the copy and run "cat /proc/partitions" to make a backup of my partition table. But the system was crash before.
I have reboot to a liveCD and make a copy of my disk on an other disk.
I have run testdisk and gpart on this image without success. So I have make a bash script with dd and grep to find some file or some special block.
With this script, I have found my last lvm backup text file ( http://pastebin.com/TTSnpr47 )
I want to know if I can make an image file of my home LV with this file and how to calculate the start/end sector (on the disk) of my home LV.
dd if=sda.img of=home.img bs=512 count=size_of_home_part1 skip=start_sector_of_home_LV
I think that size_of_home_part1 is 11008*8192 but I want to know how to calculate start_sector_of_home_LV. How to calculate this value ?
In the lvm backup file, I don't know what is the value "pe_start" in pv0 section. What is this value ?
thanks for your help.
Some more info:
# hdparm -g /dev/sda
/dev/sda:
geometry = 14593/255/63, sectors = 234441648, start = 0
My partition table before the crash./dev/sda1 /boot ~200Mo/dev/sda2 /boot2 ~200Mo/dev/sda3 swap ~1Go/dev/sda4
/dev/sda5 PV ~107Go
End of disk
Quoted 2 lines · KiKouN
I think that
size_of_home_part1is 11008*8192 but I want to know how to calculatestart_sector_of_home_LV. How to calculate this value ?
It looks like your home lv is split into two segments, one that is 3 GB long and at the start of the pv, and another segment that is 43 GB long and elsewhere on the disk. Did you create the home lv first only 3 GB in size, then extend it later?
The second segment starts at extent 0, which is at sector 384, and is 768 4 MB segments long, or 768 x 4096 x 2 = 6291456 sectors. The first segment starts at extent 5376, which is at sector 5376 x 4096 x 2 + 384 = 44040576 and is 11008 extents or 90177536 sectors long.
These are all relative to the physical volume, which looks like it was in /dev/sda7. If you overwrite the partition table then you will need to figure out where that partition started.
Quoted 2 lines
In the lvm backup file, I don't know what is the value "
pe_start" in pv0 section. What is this value ?
pe_start is the sector where the first physical extent is.