Skip to contentSkip to conversation

re-submit3 [ANNOUNCEMENT] NET: usb: sierra_net.c driver

PATCH Elina Pasheva 2 participants 3 messages Apr 6, 2010 – Apr 9, 2010 1 message not in the archive

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

Subject: re-submit3 [ANNOUNCEMENT] NET: usb: sierra_net.c driver
From: Elina Pasheva <[email protected]>

The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs).

This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is
available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31.

This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later.
This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface.

Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system.

The version number of sierra_net.c driver is set to 2.0. This patch has been tested on kernel-2.6.34-rc3. This patch has been checked against net-2.6 tree.

---

 drivers/net/usb/Kconfig      |   10 
 drivers/net/usb/Makefile     |    2 
 drivers/net/usb/sierra_net.c |  970 +++++++++++++++++++++++++++++++++
 3 files changed, 982 insertions(+)
drivers/net/usb/Kconfig +10 -0
@@ -385,4 +385,14 @@ config USB_CDC_PHONET
 	  cellular modem, as found on most Nokia handsets with the
 	  "PC suite" USB profile.
 
+config USB_SIERRA_NET
+	tristate "USB-to-WWAN Driver for Sierra Wireless modems"
+	depends on USB_USBNET
+	default y
+	help
+	  Choose this option if you have a Sierra Wireless USB-to-WWAN device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sierra_net.
+
 endmenu
drivers/net/usb/Makefile +2 -0
@@ -23,4 +23,6 @@ obj-$(CONFIG_USB_NET_MCS7830)	+= mcs7830
 obj-$(CONFIG_USB_USBNET)	+= usbnet.o
 obj-$(CONFIG_USB_NET_INT51X1)	+= int51x1.o
 obj-$(CONFIG_USB_CDC_PHONET)	+= cdc-phonet.o
+obj-$(CONFIG_USB_SIERRA_NET)	+= sierra_net.o
+
 
drivers/net/usb/sierra_net.c +970 -0

971 lines not on this page · raw message

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

#1 lore raw

From: Elina Pasheva <[email protected]>
Date: Mon, 5 Apr 2010 18:39:08 -0700

Quoted 2 lines

Subject: re-submit3 [ANNOUNCEMENT] NET: usb: sierra_net.c driver
From: Elina Pasheva <[email protected]>

I want you to tell me exactly how you generated this patch.

It doesn't apply, and I suspect that you tried to fix the excess empty lines at the end of certain files by editing the patch by hand.

If so, did you test the result?

The patch is corrupted and more importantly git won't accept it.

davem@sunset:~/src/GIT/net-2.6$ git am --signoff re-submit3-ANNOUNCEMENT-NET-usb-sierra_net.c-driver.patch 
Applying: re-submit3 [ANNOUNCEMENT] NET: usb: sierra_net.c driver
/home/davem/src/GIT/net-2.6/.git/rebase-apply/patch:36: new blank line at EOF.
+
error: drivers/net/usb/sierra_net.c: does not exist in index
Patch failed at 0001 re-submit3 [ANNOUNCEMENT] NET: usb: sierra_net.c driver
When you have resolved this problem run "git am --resolved".
If you would prefer to skip this patch, instead run "git am --skip".
To restore the original branch and stop patching run "git am --abort".
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#3 lore raw
In reply to a message not in the archive
Quoted 15 lines · David Miller

From: Elina Pasheva <[email protected]>
Date: Mon, 5 Apr 2010 18:39:08 -0700

Quoted 2 lines

Subject: re-submit3 [ANNOUNCEMENT] NET: usb: sierra_net.c driver
From: Elina Pasheva <[email protected]>

I want you to tell me exactly how you generated this patch.

It doesn't apply, and I suspect that you tried to fix the excess empty lines at the end of certain files by editing the patch by hand.

If so, did you test the result?

The patch is corrupted and more importantly git won't accept it.

Quoted 10 lines
davem@sunset:~/src/GIT/net-2.6$ git am --signoff re-submit3-ANNOUNCEMENT-NET-usb-sierra_net.c-driver.patch 
Applying: re-submit3 [ANNOUNCEMENT] NET: usb: sierra_net.c driver
/home/davem/src/GIT/net-2.6/.git/rebase-apply/patch:36: new blank line at EOF.
+
error: drivers/net/usb/sierra_net.c: does not exist in index
Patch failed at 0001 re-submit3 [ANNOUNCEMENT] NET: usb: sierra_net.c driver
When you have resolved this problem run "git am --resolved".
If you would prefer to skip this patch, instead run "git am --skip".
To restore the original branch and stop patching run "git am --abort".

Hi Dave,
I reproduced the problem here.
I fixed it by adding an empty sierra_net.c file in my master branch (net-2.6).
Regards,
Elina

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html