Staging: comedi: Fixed long line lengths in comedi.h
PATCH 1/1 Staging: comedi: Fixed long line lengths in comedi.h
This patches fixes some of the long line lengths that checkpatch.pl was complaining about in comedi.h
Signed-off-by Mark Rankilor <[email protected]>
--- drivers/staging/comedi/comedi.h | 26 +++++++++++++++++--------- 1 files changed, 17 insertions(+), 9 deletions(-)
drivers/staging/comedi/comedi.h +17 -9
@@ -46,8 +46,10 @@#define COMEDI_DEVCONF_AUX_DATA2_LENGTH 26#define COMEDI_DEVCONF_AUX_DATA1_LENGTH 27#define COMEDI_DEVCONF_AUX_DATA0_LENGTH 28 -#define COMEDI_DEVCONF_AUX_DATA_HI 29/* most significant 32 bits of pointer address (if needed) */ -#define COMEDI_DEVCONF_AUX_DATA_LO 30/* least significant 32 bits of pointer address */ +/* most significant 32 bits of pointer address (if needed) */ +#define COMEDI_DEVCONF_AUX_DATA_HI 29 +/* least significant 32 bits of pointer address */ +#define COMEDI_DEVCONF_AUX_DATA_LO 30#define COMEDI_DEVCONF_AUX_DATA_LENGTH 31/* total data length */ /* max length of device and driver names */
@@ -55,8 +57,10 @@/* packs and unpacks a channel/range number */ -#define CR_PACK (chan, rng, aref) ((((aref)&0x3)<<24) | (((rng)&0xff)<<16) | (chan)) -#define CR_PACK_FLAGS (chan, range, aref, flags) (CR_PACK(chan, range, aref) | ((flags) & CR_FLAGS_MASK)) +#define CR_PACK (chan, rng, aref) \ + ((((aref)&0x3)<<24) | (((rng)&0xff)<<16) | (chan)) +#define CR_PACK_FLAGS (chan, range, aref, flags) \ + (CR_PACK(chan, range, aref) | ((flags) & CR_FLAGS_MASK))#define CR_CHAN (a) ((a)&0xffff)#define CR_RANGE (a) (((a)>>16)&0xff)
@@ -125,7 +129,8 @@/* command flags */ /* These flags are used in comedi_cmd structures */ -#define CMDF_PRIORITY 0x00000008/* try to use a real-time interrupt while performing command */ +/* try to use a real-time interrupt while performing command */ +#define CMDF_PRIORITY 0x00000008#define TRIG_RT CMDF_PRIORITY/* compatibility definition */
@@ -242,15 +247,18 @@INSN_CONFIG_DISARM =32 ,INSN_CONFIG_GET_COUNTER_STATUS =33 ,INSN_CONFIG_RESET =34 , -INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR =1001 ,/* Use CTR as single pulsegenerator */ -INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR =1002 ,/* Use CTR as pulsetraingenerator */ -INSN_CONFIG_GPCT_QUADRATURE_ENCODER =1003 ,/* Use the counter as encoder */ +/* Use CTR as single pulsegenerator */ +INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR =1001 , +/* Use CTR as pulsetraingenerator */ +INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR =1002 , +/* Use the counter as encoder */ +INSN_CONFIG_GPCT_QUADRATURE_ENCODER =1003 ,INSN_CONFIG_SET_GATE_SRC =2001 ,/* Set gate source */ INSN_CONFIG_GET_GATE_SRC =2002 ,/* Get gate source */ INSN_CONFIG_SET_CLOCK_SRC =2003 ,/* Set master clock source */ INSN_CONFIG_GET_CLOCK_SRC =2004 ,/* Get master clock source */ INSN_CONFIG_SET_OTHER_SRC =2005 ,/* Set other source */ -/* INSN_CONFIG_GET_OTHER_SRC = 2006,*//* Get other source */ +/* INSN_CONFIG_GET_OTHER_SRC = 2006,*//* Get other source */ INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE =2006 ,/* Get size in bytes of subdevice's on-board fifos used during
Signature · 1 line
1.7.0.5