Remove unused feature CONFIG_SERIAL_SOFTWARE_FIFO
Subsystems (3)
PATCH 1/1 Remove unused feature CONFIG_SERIAL_SOFTWARE_FIFO
This "feature" of a interrupt driven serial driver, is not enabled in any of the current configuration headers. It's only implemented in the PPC4xx UART driver. Since it's not used at all, this patch removes all references to it, resulting in a cleaner code.
Signed-off-by Stefan Roese <[email protected]>
--- README | 12 --- arch/i386/lib/board.c | 7 -- arch/m68k/lib/board.c | 4 - arch/powerpc/cpu/ppc4xx/4xx_uart.c | 134 ------------------------------------ arch/powerpc/lib/board.c | 7 -- arch/sparc/lib/board.c | 4 - common/stdio.c | 7 -- doc/README.ppc440 | 6 -- include/common.h | 8 -- include/configs/AP1000.h | 6 -- include/configs/ATUM8548.h | 1 - include/configs/JSE.h | 6 -- include/configs/KAREF.h | 1 - include/configs/METROBOX.h | 1 - include/configs/ML2.h | 10 --- include/configs/MPC8315ERDB.h | 1 - include/configs/MPC8323ERDB.h | 1 - include/configs/MPC832XEMDS.h | 1 - include/configs/MPC8349EMDS.h | 1 - include/configs/MPC8349ITX.h | 1 - include/configs/MPC8360EMDS.h | 1 - include/configs/MPC8360ERDK.h | 1 - include/configs/MPC837XEMDS.h | 1 - include/configs/MPC837XERDB.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8540ADS.h | 1 - include/configs/MPC8540EVAL.h | 1 - include/configs/MPC8541CDS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8548CDS.h | 1 - include/configs/MPC8555CDS.h | 1 - include/configs/MPC8568MDS.h | 1 - include/configs/MPC8569MDS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/MPC8610HPCD.h | 1 - include/configs/MPC8641HPCN.h | 1 - include/configs/MVBLM7.h | 1 - include/configs/P1_P2_RDB.h | 1 - include/configs/P2020DS.h | 1 - include/configs/PM854.h | 1 - include/configs/SBC8540.h | 1 - include/configs/TQM834x.h | 1 - include/configs/TQM85xx.h | 1 - include/configs/aria.h | 1 - include/configs/bubinga.h | 1 - include/configs/dlvision.h | 1 - include/configs/eNET.h | 1 - include/configs/ebony.h | 1 - include/configs/hcu5.h | 1 - include/configs/kmeter1.h | 1 - include/configs/mcu25.h | 7 -- include/configs/mecp5123.h | 1 - include/configs/mpc5121ads.h | 1 - include/configs/neo.h | 1 - include/configs/ocotea.h | 1 - include/configs/sbc8349.h | 1 - include/configs/sbc8548.h | 1 - include/configs/sbc8560.h | 1 - include/configs/sbc8641d.h | 1 - include/configs/sc3.h | 8 -- include/configs/socrates.h | 1 - include/configs/stxssa.h | 1 - include/configs/taihu.h | 1 - include/configs/vme8349.h | 1 - include/configs/walnut.h | 1 - include/configs/yucca.h | 1 - 66 files changed, 0 insertions(+), 278 deletions(-)
README +0 -12
@@ -535,18 +535,6 @@ The following options need to be configured: must be defined, to setup the maximum idle timeout for the SMC. -- Interrupt driven serial port input: - CONFIG_SERIAL_SOFTWARE_FIFO - - PPC405GP only. - Use an interrupt handler for receiving data on the - serial port. It also enables using hardware handshake - (RTS/CTS) and UART's built-in FIFO. Set the number of - bytes the interrupt driven input buffer should have. - - Leave undefined to disable this feature, including - disable the buffer and hardware handshake. - - Console UART Number: CONFIG_UART1_CONSOLE
arch/i386/lib/board.c +0 -7
@@ -335,13 +335,6 @@ void board_init_r(gd_t *id, ulong dest_addr)enable_interrupts ();show_boot_progress (0x28 ); -/* Must happen after interrupts are initialized since -* an irq handler gets installed -*/ -#ifdef CONFIG_SERIAL_SOFTWARE_FIFO -serial_buffered_init (); -#endif -#ifdef CONFIG_STATUS_LED status_led_set (STATUS_LED_BOOT ,STATUS_LED_BLINKING );#endif
arch/m68k/lib/board.c +0 -4
@@ -596,10 +596,6 @@ void board_init_r (gd_t *id, ulong dest_addr)*/ timer_init (); -#ifdef CONFIG_SERIAL_SOFTWARE_FIFO -serial_buffered_init (); -#endif -#ifdef CONFIG_STATUS_LED status_led_set (STATUS_LED_BOOT ,STATUS_LED_BLINKING );#endif
arch/powerpc/cpu/ppc4xx/4xx_uart.c +0 -134
152 lines not on this page · raw message
arch/powerpc/lib/board.c +0 -7
@@ -903,13 +903,6 @@ void board_init_r (gd_t *id, ulong dest_addr)*/ interrupt_init (); -/* Must happen after interrupts are initialized since -* an irq handler gets installed -*/ -#ifdef CONFIG_SERIAL_SOFTWARE_FIFO -serial_buffered_init (); -#endif -#if defined(CONFIG_STATUS_LED ) && defined(STATUS_LED_BOOT )status_led_set (STATUS_LED_BOOT ,STATUS_LED_BLINKING );#endif
arch/sparc/lib/board.c +0 -4
@@ -379,10 +379,6 @@ void board_init_f(ulong bootflag)/* Initialize the console (after the relocation and devices init) */ console_init_r (); -#ifdef CONFIG_SERIAL_SOFTWARE_FIFO -serial_buffered_init (); -#endif -#ifdef CONFIG_STATUS_LED status_led_set (STATUS_LED_BOOT ,STATUS_LED_BLINKING );#endif
common/stdio.c +0 -7
@@ -76,17 +76,10 @@ static void drv_system_init (void)strcpy (dev.name,"serial" ); dev.flags =DEV_FLAGS_OUTPUT |DEV_FLAGS_INPUT |DEV_FLAGS_SYSTEM ; -#ifdef CONFIG_SERIAL_SOFTWARE_FIFO - dev.putc = serial_buffered_putc; - dev.puts = serial_buffered_puts; - dev.getc = serial_buffered_getc; - dev.tstc = serial_buffered_tstc; -#else dev.putc = serial_putc; dev.puts = serial_puts; dev.getc = serial_getc; dev.tstc = serial_tstc; -#endif stdio_register (&dev);
doc/README.ppc440 +0 -6
@@ -77,12 +77,6 @@ This is controlled with the CONFIG_SYS_EXT_SERIAL_CLOCK flag. When using internal clocking, the "ideal baud rate" settings in the 440GP user manual are automatically calculated. -CONFIG_SERIAL_SOFTWARE_FIFO enables interrupt-driven serial operation. -But the last time I checked, interrupts were initialized after the -serial port causing the interrupt handler to be removed from the -handler table. This will probably be fixed soon ... or fix it -yourself and submit a patch :-) - I2C =================
include/common.h +0 -8
@@ -205,14 +205,6 @@ typedef void (interrupt_handler_t)(void *);* Function Prototypes */ -#ifdef CONFIG_SERIAL_SOFTWARE_FIFO -void serial_buffered_init (void ); -void serial_buffered_putc (const char ); -void serial_buffered_puts (const char *); -int serial_buffered_getc (void ); -int serial_buffered_tstc (void ); -#endif /* CONFIG_SERIAL_SOFTWARE_FIFO */ -void hang (void ) __attribute__ ((noreturn));/* */
include/configs/AP1000.h +0 -6
@@ -52,12 +52,6 @@#define CONFIG_BOOTCOMMAND ""/* autoboot command */ -/* Size (bytes) of interrupt driven serial port buffer. -* Set to 0 to use polling instead of interrupts. -* Setting to 0 will also disable RTS/CTS handshaking. -*/ -#undef CONFIG_SERIAL_SOFTWARE_FIFO -#define CONFIG_BOOTARGS "console=ttyS0,57600"#define CONFIG_LOADS_ECHO 1/* echo on for serial download */
include/configs/ATUM8548.h +0 -1
@@ -203,7 +203,6 @@/* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/JSE.h +0 -6
@@ -101,12 +101,6 @@/* Set console baudrate to 9600 */ #define CONFIG_BAUDRATE 9600 -/* Size (bytes) of interrupt driven serial port buffer. -* Set to 0 to use polling instead of interrupts. -* Setting to 0 will also disable RTS/CTS handshaking. -*/ -#undef CONFIG_SERIAL_SOFTWARE_FIFO -/* * Configuration related to auto-boot. *
include/configs/KAREF.h +0 -1
@@ -91,7 +91,6 @@/*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SERIAL_MULTI 1#define CONFIG_BAUDRATE 9600
include/configs/METROBOX.h +0 -1
@@ -153,7 +153,6 @@/*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SERIAL_MULTI 1#define CONFIG_BAUDRATE 9600
include/configs/ML2.h +0 -10
@@ -52,16 +52,6 @@#define CONFIG_PREBOOT "fsload 0x00100000 /boot/image" -/* Size (bytes) of interrupt driven serial port buffer. -* Set to 0 to use polling instead of interrupts. -* Setting to 0 will also disable RTS/CTS handshaking. -*/ -#if 0 -#define CONFIG_SERIAL_SOFTWARE_FIFO 4000 -#else -#undef CONFIG_SERIAL_SOFTWARE_FIFO -#endif -#if 0 #define CONFIG_BOOTARGS "root=/dev/nfs " \ "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0 " \
include/configs/MPC8315ERDB.h +0 -1
@@ -297,7 +297,6 @@* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8323ERDB.h +0 -1
@@ -262,7 +262,6 @@* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC832XEMDS.h +0 -1
@@ -273,7 +273,6 @@* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8349EMDS.h +0 -1
@@ -283,7 +283,6 @@* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8349ITX.h +0 -1
@@ -329,7 +329,6 @@ boards, we say we have two, but don't display a message if we find only one. */* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8360EMDS.h +0 -1
@@ -307,7 +307,6 @@* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8360ERDK.h +0 -1
@@ -237,7 +237,6 @@* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC837XEMDS.h +0 -1
@@ -298,7 +298,6 @@* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC837XERDB.h +0 -1
@@ -315,7 +315,6 @@* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8536DS.h +0 -1
@@ -408,7 +408,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);* shorted - index 1 */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8540ADS.h +0 -1
@@ -237,7 +237,6 @@/* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8540EVAL.h +0 -1
@@ -173,7 +173,6 @@/* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8541CDS.h +0 -1
@@ -263,7 +263,6 @@ extern unsigned long get_clock_freq(void);/* Serial Port */ #define CONFIG_CONS_INDEX 2 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8544DS.h +0 -1
@@ -219,7 +219,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);* shorted - index 1 */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8548CDS.h +0 -1
@@ -286,7 +286,6 @@ extern unsigned long get_clock_freq(void);/* Serial Port */ #define CONFIG_CONS_INDEX 2 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8555CDS.h +0 -1
@@ -261,7 +261,6 @@ extern unsigned long get_clock_freq(void);/* Serial Port */ #define CONFIG_CONS_INDEX 2 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8568MDS.h +0 -1
@@ -247,7 +247,6 @@ extern unsigned long get_clock_freq(void);/* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8569MDS.h +0 -1
@@ -279,7 +279,6 @@ extern unsigned long get_clock_freq(void);/* Serial Port */ #define CONFIG_CONS_INDEX 1#define CONFIG_SERIAL_MULTI 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8572DS.h +0 -1
@@ -341,7 +341,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);* shorted - index 1 */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8610HPCD.h +0 -1
@@ -222,7 +222,6 @@/* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MPC8641HPCN.h +0 -1
@@ -276,7 +276,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);/* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/MVBLM7.h +0 -1
@@ -150,7 +150,6 @@* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/P1_P2_RDB.h +0 -1
@@ -281,7 +281,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);* shorted - index 1 */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/P2020DS.h +0 -1
@@ -329,7 +329,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);* shorted - index 1 */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/PM854.h +0 -1
@@ -174,7 +174,6 @@/* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/SBC8540.h +0 -1
@@ -205,7 +205,6 @@#undef CONFIG_CONS_NONE/* define if console on something else */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/TQM834x.h +0 -1
@@ -166,7 +166,6 @@ extern int tqm834x_num_flash_banks;* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/TQM85xx.h +0 -1
@@ -260,7 +260,6 @@#else /* !CONFIG_TQM8560 */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/aria.h +0 -1
@@ -321,7 +321,6 @@* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO/* * Serial console configuration
include/configs/bubinga.h +0 -1
@@ -123,7 +123,6 @@* If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO#undef CONFIG_SYS_EXT_SERIAL_CLOCK/* external serial clock */ #undef CONFIG_SYS_405_UART_ERRATA_59/* 405GP/CR Rev. D silicon */ #define CONFIG_SYS_BASE_BAUD 691200
include/configs/dlvision.h +0 -1
@@ -97,7 +97,6 @@* If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO#undef CONFIG_SYS_EXT_SERIAL_CLOCK/* external serial clock */ #undef CONFIG_SYS_405_UART_ERRATA_59/* 405GP/CR Rev. D silicon */ #define CONFIG_SYS_BASE_BAUD 691200
include/configs/eNET.h +0 -1
@@ -59,7 +59,6 @@* Serial Configuration */ #define CONFIG_SERIAL_MULTI -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_CONS_INDEX 1#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL
include/configs/ebony.h +0 -1
@@ -81,7 +81,6 @@/*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_EXT_SERIAL_CLOCK (1843200 * 6)/* Ext clk @ 11.059 MHz */ /*-----------------------------------------------------------------------
include/configs/hcu5.h +0 -1
@@ -93,7 +93,6 @@*----------------------------------------------------------------------*/ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* external serial clock */ #define CONFIG_BAUDRATE 115200 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#undef CONFIG_UART1_CONSOLE/*-----------------------------------------------------------------------
include/configs/kmeter1.h +0 -1
@@ -257,7 +257,6 @@* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/mcu25.h +0 -7
@@ -86,16 +86,9 @@* If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ -/* needed to be able to define CONFIG_SERIAL_SOFTWARE_FIFO */ #undef CONFIG_SYS_405_UART_ERRATA_59/* 405GP/CR Rev. D silicon */ #define CONFIG_SYS_BASE_BAUD 691200 -/* Size (bytes) of interrupt driven serial port buffer. -* Set to 0 to use polling instead of interrupts. -* Setting to 0 will also disable RTS/CTS handshaking. -*/ -#undef CONFIG_SERIAL_SOFTWARE_FIFO -/* Set console baudrate to 9600 */ #define CONFIG_BAUDRATE 9600
include/configs/mecp5123.h +0 -1
@@ -218,7 +218,6 @@* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO/* * Serial console configuration
include/configs/mpc5121ads.h +0 -1
@@ -284,7 +284,6 @@* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO/* * Serial console configuration
include/configs/neo.h +0 -1
@@ -98,7 +98,6 @@* If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO#undef CONFIG_SYS_EXT_SERIAL_CLOCK/* external serial clock */ #undef CONFIG_SYS_405_UART_ERRATA_59/* 405GP/CR Rev. D silicon */ #define CONFIG_SYS_BASE_BAUD 691200
include/configs/ocotea.h +0 -1
@@ -81,7 +81,6 @@/*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_EXT_SERIAL_CLOCK (1843200 * 6)/* Ext clk @ 11.059 MHz */ /*-----------------------------------------------------------------------
include/configs/sbc8349.h +0 -1
@@ -270,7 +270,6 @@* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/sbc8548.h +0 -1
@@ -342,7 +342,6 @@/* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/sbc8560.h +0 -1
@@ -203,7 +203,6 @@#undef CONFIG_CONS_NONE/* define if console on something else */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/sbc8641d.h +0 -1
@@ -260,7 +260,6 @@/* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/sc3.h +0 -8
@@ -77,14 +77,6 @@* Serial Port *----------------------------------------------------------------------*/ #define CONFIG_SERIAL_MULTI -#undef CONFIG_SERIAL_SOFTWARE_FIFO -/* -* define CONFIG_POWER_DOWN if your cpu should power down while waiting for your input -* Works only, if you have enabled the CONFIG_SERIAL_SOFTWARE_FIFO feature -*/ -#if CONFIG_SERIAL_SOFTWARE_FIFO -#define CONFIG_POWER_DOWN -#endif /* * define CONFIG_SYS_CLK_FREQ to your base crystal clock in Hz
include/configs/socrates.h +0 -1
@@ -218,7 +218,6 @@/* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/stxssa.h +0 -1
@@ -176,7 +176,6 @@/* Serial Port */ #define CONFIG_CONS_INDEX 2 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/taihu.h +0 -1
@@ -127,7 +127,6 @@* If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO#undef CONFIG_SYS_EXT_SERIAL_CLOCK/* external serial clock */ #undef CONFIG_SYS_405_UART_ERRATA_59/* 405GP/CR Rev. D silicon */ #define CONFIG_SYS_BASE_BAUD 691200
include/configs/vme8349.h +0 -1
@@ -184,7 +184,6 @@* Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1
include/configs/walnut.h +0 -1
@@ -84,7 +84,6 @@* If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO#undef CONFIG_SYS_EXT_SERIAL_CLOCK/* external serial clock */ #undef CONFIG_SYS_405_UART_ERRATA_59/* 405GP/CR Rev. D silicon */ #define CONFIG_SYS_BASE_BAUD 691200
include/configs/yucca.h +0 -1
@@ -108,7 +108,6 @@*----------------------------------------------------------------------*/ #undef CONFIG_UART1_CONSOLE -#undef CONFIG_SERIAL_SOFTWARE_FIFO#undef CONFIG_SYS_EXT_SERIAL_CLOCK/* #define CONFIG_SYS_EXT_SERIAL_CLOCK (1843200 * 6) */ /* Ext clk @ 11.059 MHz */
Signature · 1 line
1.7.1