ARM: SAMSUNG: Remove old email address for [email protected]
Subsystems (3)
PATCH 1/1 ARM: SAMSUNG: Remove old email address for [email protected]
The address ben at fluff.org is old, ben-linux at fluff.org has been in use for a long time, and we should fixup all the occasions of the older address to avoid confusion.
Signed-off-by Ben Dooks <[email protected]>
--- arch/arm/mach-s3c2410/mach-h1940.c | 2 +- arch/arm/mach-s3c2412/mach-jive.c | 2 +- arch/arm/mach-s3c2412/mach-smdk2413.c | 6 +++--- arch/arm/mach-s3c2440/mach-rx3715.c | 2 +- arch/arm/mach-s3c2440/mach-smdk2440.c | 2 +- arch/arm/mach-s3c2443/mach-smdk2443.c | 2 +- arch/arm/mach-s3c64xx/mach-smdk6400.c | 2 +- arch/arm/mach-s3c64xx/mach-smdk6410.c | 2 +- 8 files changed, 10 insertions(+), 10 deletions(-)
arch/arm/mach-s3c2410/mach-h1940.c +1 -1
@@ -339,7 +339,7 @@ static void __init h1940_init(void) }MACHINE_START (H1940 ,"IPAQ-H1940" ) -/* Maintainer: Ben Dooks <[email protected]> */ +/* Maintainer: Ben Dooks <[email protected]> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100,
arch/arm/mach-s3c2412/mach-jive.c +1 -1
@@ -674,7 +674,7 @@ static void __init jive_machine_init(void) }MACHINE_START (JIVE ,"JIVE" ) -/* Maintainer: Ben Dooks <[email protected]> */ +/* Maintainer: Ben Dooks <[email protected]> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100,
arch/arm/mach-s3c2412/mach-smdk2413.c +3 -3
@@ -150,7 +150,7 @@ static void __init smdk2413_machine_init(void) }MACHINE_START (S3C2413 ,"S3C2413" ) -/* Maintainer: Ben Dooks <[email protected]> */ +/* Maintainer: Ben Dooks <[email protected]> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100,
@@ -163,7 +163,7 @@ MACHINE_START(S3C2413, "S3C2413") MACHINE_END MACHINE_START(SMDK2412, "SMDK2412") - /* Maintainer: Ben Dooks <[email protected]> */ + /* Maintainer: Ben Dooks <[email protected]> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100,
@@ -176,7 +176,7 @@ MACHINE_START(SMDK2412, "SMDK2412") MACHINE_END MACHINE_START(SMDK2413, "SMDK2413") - /* Maintainer: Ben Dooks <[email protected]> */ + /* Maintainer: Ben Dooks <[email protected]> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100,
arch/arm/mach-s3c2440/mach-rx3715.c +1 -1
@@ -209,7 +209,7 @@ static void __init rx3715_init_machine(void) }MACHINE_START (RX3715 ,"IPAQ-RX3715" ) -/* Maintainer: Ben Dooks <[email protected]> */ +/* Maintainer: Ben Dooks <[email protected]> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100,
arch/arm/mach-s3c2440/mach-smdk2440.c +1 -1
@@ -174,7 +174,7 @@ static void __init smdk2440_machine_init(void) }MACHINE_START (S3C2440 ,"SMDK2440" ) -/* Maintainer: Ben Dooks <[email protected]> */ +/* Maintainer: Ben Dooks <[email protected]> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100,
arch/arm/mach-s3c2443/mach-smdk2443.c +1 -1
@@ -131,7 +131,7 @@ static void __init smdk2443_machine_init(void) }MACHINE_START (SMDK2443 ,"SMDK2443" ) -/* Maintainer: Ben Dooks <[email protected]> */ +/* Maintainer: Ben Dooks <[email protected]> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100,
arch/arm/mach-s3c64xx/mach-smdk6400.c +1 -1
@@ -84,7 +84,7 @@ static void __init smdk6400_machine_init(void) }MACHINE_START (SMDK6400 ,"SMDK6400" ) -/* Maintainer: Ben Dooks <[email protected]> */ +/* Maintainer: Ben Dooks <[email protected]> */ .phys_io = S3C_PA_UART & 0xfff00000, .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S3C64XX_PA_SDRAM + 0x100,
arch/arm/mach-s3c64xx/mach-smdk6410.c +1 -1
@@ -656,7 +656,7 @@ static void __init smdk6410_machine_init(void) }MACHINE_START (SMDK6410 ,"SMDK6410" ) -/* Maintainer: Ben Dooks <[email protected]> */ +/* Maintainer: Ben Dooks <[email protected]> */ .phys_io = S3C_PA_UART & 0xfff00000, .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S3C64XX_PA_SDRAM + 0x100,
Signature · 1 line
1.6.3.3