Skip to contentSkip to conversation

PXA300-DDRAM base vaue

DISCUSSION balakrishnan 1 participant 1 message Jun 1, 2010

lore
Share & tools
lore
#0 lore raw

I am working on pxa300 based development board and using Linux 2.6.34. This Linux kernel already has support for following boards
1. zylonite_pxa300
2. cm-x300
3. colibri-pxa300
4. littleton

My doubt is that pxa300 based boards are using "0xa0000000" as DDRAM base and PHYS_OFFSET is also defined in "arch/arm/mach-pxa/include/mach/memory.h" as 0xa0000000. But in our board DDR is mapped in 0x80000000. Does it make any problem?. Because after mmu is turned ON, my board is hanging.

"zreladdr-y := 0x80008000" is defined in
"arch/arm/mach-pxa/Makefile.boot" file .
my machine_desc is as follows

.phys_io        = 0x40000000, 
.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,  
.boot_params    = 0x80000100,  

With Thanks
J.Balakrishnan