Skip to contentSkip to conversation

Staging: comedi: fix style errors in adl_pci9111.c

PATCH In review John Sheehan 2 participants 3 messages Jun 16, 2010 – Jun 20, 2010 1 message not in the archive Staging

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 Staging: comedi: fix style errors in adl_pci9111.c

From: John Sheehan <[email protected]>

a patch for adl_pci9111.c, to fix the following
errors reported by the checkpatch.pl tool,

-Macros with complex values should be enclosed in parenthesis -need consistent spacing around '&' (ctx:WxV) -spaces required around that '==' (ctx:VxV)
-Macros with complex values should be enclosed in parenthesis -trailing statements should be on next line

---
 drivers/staging/comedi/drivers/adl_pci9111.c |   25 +++++++++++++------------
 1 files changed, 13 insertions(+), 12 deletions(-)
drivers/staging/comedi/drivers/adl_pci9111.c +13 -12
index 36a254c..b9501ce 100644
@@ -177,7 +177,7 @@ TODO:
 #define PCI9111_FIFO_FULL_MASK				0x40
 #define PCI9111_AD_BUSY_MASK				0x80
 
-#define PCI9111_IO_BASE dev->iobase
+#define PCI9111_IO_BASE (dev->iobase)
 
 /*
  * Define inlined function
@@ -190,7 +190,7 @@ TODO:
   outb(flags, PCI9111_IO_BASE+PCI9111_REGISTER_TRIGGER_MODE_CONTROL)
 
 #define pci9111_interrupt_and_fifo_get() \
-  ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK) >> 4) &0x03)
+  ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK) >> 4)&0x03)
 
 #define pci9111_interrupt_and_fifo_set(flags) \
   outb(flags, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL)
@@ -208,35 +208,35 @@ TODO:
 
 #define pci9111_is_fifo_full() \
   ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)& \
-    PCI9111_FIFO_FULL_MASK)==0)
+    PCI9111_FIFO_FULL_MASK) == 0)
 
 #define pci9111_is_fifo_half_full() \
   ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)& \
-    PCI9111_FIFO_HALF_FULL_MASK)==0)
+    PCI9111_FIFO_HALF_FULL_MASK) == 0)
 
 #define pci9111_is_fifo_empty() \
   ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)& \
-    PCI9111_FIFO_EMPTY_MASK)==0)
+    PCI9111_FIFO_EMPTY_MASK) == 0)
 
 #define pci9111_ai_channel_set(channel) \
   outb((channel)&PCI9111_CHANNEL_MASK, PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_CONTROL)
 
 #define pci9111_ai_channel_get() \
-  inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_READBACK)&PCI9111_CHANNEL_MASK
+  (inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_READBACK)&(PCI9111_CHANNEL_MASK))
 
 #define pci9111_ai_range_set(range) \
   outb((range)&PCI9111_RANGE_MASK, PCI9111_IO_BASE+PCI9111_REGISTER_INPUT_SIGNAL_RANGE)
 
 #define pci9111_ai_range_get() \
-  inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)&PCI9111_RANGE_MASK
+  (inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)&(PCI9111_RANGE_MASK))
 
 #define pci9111_ai_get_data() \
-  ((inw(PCI9111_IO_BASE+PCI9111_REGISTER_AD_FIFO_VALUE)>>4)&PCI9111_AI_RESOLUTION_MASK) \
-  ^ PCI9111_AI_RESOLUTION_2_CMP_BIT
+  (((inw(PCI9111_IO_BASE+PCI9111_REGISTER_AD_FIFO_VALUE)>>4)&PCI9111_AI_RESOLUTION_MASK) \
+  ^ (PCI9111_AI_RESOLUTION_2_CMP_BIT))
 
 #define pci9111_hr_ai_get_data() \
-  (inw(PCI9111_IO_BASE+PCI9111_REGISTER_AD_FIFO_VALUE) & PCI9111_HR_AI_RESOLUTION_MASK) \
-  ^ PCI9111_HR_AI_RESOLUTION_2_CMP_BIT
+  ((inw(PCI9111_IO_BASE+PCI9111_REGISTER_AD_FIFO_VALUE) & PCI9111_HR_AI_RESOLUTION_MASK) \
+  ^ (PCI9111_HR_AI_RESOLUTION_2_CMP_BIT))
 
 #define pci9111_ao_set_data(data) \
   outw(data&PCI9111_AO_RESOLUTION_MASK, PCI9111_IO_BASE+PCI9111_REGISTER_DA_OUTPUT)
@@ -551,7 +551,8 @@ static int pci9111_ai_cancel(struct comedi_device *dev,
 #define pci9111_check_trigger_src(src, flags) \
   tmp = src; \
   src &= flags; \
-  if (!src || tmp != src) error++
+  if (!src || tmp != src) \
+	error++
 
 static int
 pci9111_ai_do_cmd_test(struct comedi_device *dev,
Signature · 1 line
1.7.0.4
#1 lore raw

Hi,

drivers/staging/comedi/drivers/adl_pci9111.c TODO: · line 193

Quoted 8 lines · John Sheehan

From: John Sheehan <[email protected]>

drivers/staging/comedi/drivers/adl_pci9111.c +1 -1
@@ -190,7 +190,7 @@ TODO:
   outb(flags, PCI9111_IO_BASE+PCI9111_REGISTER_TRIGGER_MODE_CONTROL)
 
 #define pci9111_interrupt_and_fifo_get() \
-  ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK) >> 4) &0x03)
+  ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK) >> 4)&0x03)

Doesn't checkpatch.pl suggest to add a whitespace after the & in that case? It would seem more readable.

Signature · 1 line
Charles Clément

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw
Quoted 11 lines · John Sheehan

Hi Charles,

2010/6/16 Charles Clément <[email protected]>:

Quoted 8 lines

Hi,

Quoted 5 lines · John Sheehan

From: John Sheehan <[email protected]>

drivers/staging/comedi/drivers/adl_pci9111.c +0 -0
@@ -190,7 +190,7 @@ TODO:
    outb(flags, PCI9111_IO_BASE+PCI9111_REGISTER_TRIGGER_MODE_CONTROL)
 
Quoted 8 lines
Quoted 5 lines

drivers/staging/comedi/drivers/adl_pci9111.c TODO: · line 193

Quoted 3 lines
drivers/staging/comedi/drivers/adl_pci9111.c +1 -1
  #define pci9111_interrupt_and_fifo_get() \
-  ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK) >> 4) &0x03)
+  ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK) >> 4)&0x03)

Doesn't checkpatch.pl suggest to add a whitespace after the & in that case?

no, surprisingly enough, it just requires the amount of whitespace at either side of the & to be consistent

Any specific reason to take this off the list?

Quoted 8 lines

John

Quoted 6 lines

It would seem more readable.

--
Charles Clément

Signature · 1 line
Charles Clément