Skip to contentSkip to conversation

V4L/DVB: mantis: Rename gpio_set_bits to mantis_gpio_set_bits

PATCH New Ben Hutchings 1 participant 1 message Jul 3, 2010 Media (V4L/DVB)

lore
Share & tools
lore

Ben Hutchings

author
#0 lore raw

PATCH 1/1 V4L/DVB: mantis: Rename gpio_set_bits to mantis_gpio_set_bits

This function is declared extern and exported, and should not be given a generic name which may conflict with gpiolib in future.

Signed-off-by Ben Hutchings <[email protected]>
---
 drivers/media/dvb/mantis/hopper_vp3028.c |    4 ++--
 drivers/media/dvb/mantis/mantis_core.c   |    2 +-
 drivers/media/dvb/mantis/mantis_dvb.c    |   14 +++++++-------
 drivers/media/dvb/mantis/mantis_ioc.c    |    4 ++--
 drivers/media/dvb/mantis/mantis_ioc.h    |    2 +-
 drivers/media/dvb/mantis/mantis_vp1034.c |    8 ++++----
 drivers/media/dvb/mantis/mantis_vp3030.c |    4 ++--
 7 files changed, 19 insertions(+), 19 deletions(-)
drivers/media/dvb/mantis/hopper_vp3028.c +2 -2
index 96674c7..d958449 100644
@@ -47,11 +47,11 @@ static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 	struct mantis_hwconfig *config	= mantis->hwconfig;
 	int err = 0;
 
-	gpio_set_bits(mantis, config->reset, 0);
+	mantis_gpio_set_bits(mantis, config->reset, 0);
 	msleep(100);
 	err = mantis_frontend_power(mantis, POWER_ON);
 	msleep(100);
-	gpio_set_bits(mantis, config->reset, 1);
+	mantis_gpio_set_bits(mantis, config->reset, 1);
 
 	err = mantis_frontend_power(mantis, POWER_ON);
 	if (err == 0) {
drivers/media/dvb/mantis/mantis_core.c +1 -1
index 8113b23..1ac4d12 100644
@@ -201,7 +201,7 @@ int mantis_core_exit(struct mantis_pci *mantis)
 }
 
 /* Turn the given bit on or off. */
-void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
 {
 	u32 cur;
drivers/media/dvb/mantis/mantis_dvb.c +7 -7
index 99d82ee..a8e5719 100644
@@ -47,15 +47,15 @@ int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power)
 	switch (power) {
 	case POWER_ON:
 		dprintk(MANTIS_DEBUG, 1, "Power ON");
-		gpio_set_bits(mantis, config->power, POWER_ON);
+		mantis_gpio_set_bits(mantis, config->power, POWER_ON);
 		msleep(100);
-		gpio_set_bits(mantis, config->power, POWER_ON);
+		mantis_gpio_set_bits(mantis, config->power, POWER_ON);
 		msleep(100);
 		break;
 
 	case POWER_OFF:
 		dprintk(MANTIS_DEBUG, 1, "Power OFF");
-		gpio_set_bits(mantis, config->power, POWER_OFF);
+		mantis_gpio_set_bits(mantis, config->power, POWER_OFF);
 		msleep(100);
 		break;
 

@@ -73,13 +73,13 @@ void mantis_frontend_soft_reset(struct mantis_pci *mantis)
 	struct mantis_hwconfig *config = mantis->hwconfig;
 
 	dprintk(MANTIS_DEBUG, 1, "Frontend RESET");
-	gpio_set_bits(mantis, config->reset, 0);
+	mantis_gpio_set_bits(mantis, config->reset, 0);
 	msleep(100);
-	gpio_set_bits(mantis, config->reset, 0);
+	mantis_gpio_set_bits(mantis, config->reset, 0);
 	msleep(100);
-	gpio_set_bits(mantis, config->reset, 1);
+	mantis_gpio_set_bits(mantis, config->reset, 1);
 	msleep(100);
-	gpio_set_bits(mantis, config->reset, 1);
+	mantis_gpio_set_bits(mantis, config->reset, 1);
 	msleep(100);
 
 	return;
drivers/media/dvb/mantis/mantis_ioc.c +2 -2
index de148de..e97cb63 100644
@@ -82,7 +82,7 @@ int mantis_get_mac(struct mantis_pci *mantis)
 EXPORT_SYMBOL_GPL(mantis_get_mac);
 
 /* Turn the given bit on or off. */
-void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
 {
 	u32 cur;
 

@@ -97,7 +97,7 @@ void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
 	mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
 	mmwrite(0x00, MANTIS_GPIF_DOUT);
 }
-EXPORT_SYMBOL_GPL(gpio_set_bits);
+EXPORT_SYMBOL_GPL(mantis_gpio_set_bits);
 
 int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl)
 {
drivers/media/dvb/mantis/mantis_ioc.h +1 -1
index 188fe5a..d56e002 100644
@@ -44,7 +44,7 @@ enum mantis_stream_control {
 };
 
 extern int mantis_get_mac(struct mantis_pci *mantis);
-extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
+extern void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
 
 extern int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl);
drivers/media/dvb/mantis/mantis_vp1034.c +4 -4
index 8e6ae55..b31fcb1 100644
@@ -50,13 +50,13 @@ int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 	switch (voltage) {
 	case SEC_VOLTAGE_13:
 		dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
-		gpio_set_bits(mantis, 13, 1);
-		gpio_set_bits(mantis, 14, 0);
+		mantis_gpio_set_bits(mantis, 13, 1);
+		mantis_gpio_set_bits(mantis, 14, 0);
 		break;
 	case SEC_VOLTAGE_18:
 		dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
-		gpio_set_bits(mantis, 13, 1);
-		gpio_set_bits(mantis, 14, 1);
+		mantis_gpio_set_bits(mantis, 13, 1);
+		mantis_gpio_set_bits(mantis, 14, 1);
 		break;
 	case SEC_VOLTAGE_OFF:
 		dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
drivers/media/dvb/mantis/mantis_vp3030.c +2 -2
index 1f43342..da39de0 100644
@@ -59,11 +59,11 @@ static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 	struct mantis_hwconfig *config	= mantis->hwconfig;
 	int err = 0;
 
-	gpio_set_bits(mantis, config->reset, 0);
+	mantis_gpio_set_bits(mantis, config->reset, 0);
 	msleep(100);
 	err = mantis_frontend_power(mantis, POWER_ON);
 	msleep(100);
-	gpio_set_bits(mantis, config->reset, 1);
+	mantis_gpio_set_bits(mantis, config->reset, 1);
 
 	if (err == 0) {
 		msleep(250);
Signature · 1 line
1.7.1