Skip to contentSkip to conversation

mfd: Add WM8321 support

PATCH In review Mark Brown 2 participants 2 messages Jul 21, 2010 – Jul 25, 2010

Subsystems (2)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/1 mfd: Add WM8321 support

The WM8321 is a PMIC for low power, high performance applications. From a software point of view the device is identical to the WM8320, all the differences between the two devices are visible only in hardware.

---
 drivers/mfd/wm831x-core.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)
drivers/mfd/wm831x-core.c +14 -0
index 1a968f3..cb94e7e 100644
@@ -95,6 +95,7 @@ enum wm831x_parent {
 	WM8311 = 0x8311,
 	WM8312 = 0x8312,
 	WM8320 = 0x8320,
+	WM8321 = 0x8321,
 };
 
 static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg)
@@ -1533,6 +1534,12 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 		dev_info(wm831x->dev, "WM8320 revision %c\n", 'A' + rev);
 		break;
 
+	case WM8321:
+		parent = WM8321;
+		wm831x->num_gpio = 12;
+		dev_info(wm831x->dev, "WM8321 revision %c\n", 'A' + rev);
+		break;
+
 	default:
 		dev_err(wm831x->dev, "Unknown WM831x device %04x\n", ret);
 		ret = -EINVAL;
@@ -1607,6 +1614,12 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 				      NULL, 0);
 		break;
 
+	case WM8321:
+		ret = mfd_add_devices(wm831x->dev, -1,
+				      wm8320_devs, ARRAY_SIZE(wm8320_devs),
+				      NULL, 0);
+		break;
+
 	default:
 		/* If this happens the bus probe function is buggy */
 		BUG();
@@ -1779,6 +1792,7 @@ static const struct i2c_device_id wm831x_i2c_id[] = {
 	{ "wm8311", WM8311 },
 	{ "wm8312", WM8312 },
 	{ "wm8320", WM8320 },
+	{ "wm8321", WM8321 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id);
Signature · 1 line
1.7.1
#1 lore raw

Hi Mark,

Quoted 3 lines · Mark Brown

The WM8321 is a PMIC for low power, high performance applications. From a software point of view the device is identical to the WM8320, all the differences between the two devices are visible only in hardware.

Patch applied, many thanks.

Cheers,
Samuel.

Quoted 54 lines
---
 drivers/mfd/wm831x-core.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)
drivers/mfd/wm831x-core.c +14 -0
index 1a968f3..cb94e7e 100644
@@ -95,6 +95,7 @@ enum wm831x_parent {
 	WM8311 = 0x8311,
 	WM8312 = 0x8312,
 	WM8320 = 0x8320,
+	WM8321 = 0x8321,
 };
 
 static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg)
@@ -1533,6 +1534,12 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 		dev_info(wm831x->dev, "WM8320 revision %c\n", 'A' + rev);
 		break;
 
+	case WM8321:
+		parent = WM8321;
+		wm831x->num_gpio = 12;
+		dev_info(wm831x->dev, "WM8321 revision %c\n", 'A' + rev);
+		break;
+
 	default:
 		dev_err(wm831x->dev, "Unknown WM831x device %04x\n", ret);
 		ret = -EINVAL;
@@ -1607,6 +1614,12 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 				      NULL, 0);
 		break;
 
+	case WM8321:
+		ret = mfd_add_devices(wm831x->dev, -1,
+				      wm8320_devs, ARRAY_SIZE(wm8320_devs),
+				      NULL, 0);
+		break;
+
 	default:
 		/* If this happens the bus probe function is buggy */
 		BUG();
@@ -1779,6 +1792,7 @@ static const struct i2c_device_id wm831x_i2c_id[] = {
 	{ "wm8311", WM8311 },
 	{ "wm8312", WM8312 },
 	{ "wm8320", WM8320 },
+	{ "wm8321", WM8321 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id);
Signature · 1 line
1.7.1
Signature · 2 lines
Intel Open Source Technology Centre
http://oss.intel.com/