Skip to contentSkip to conversation

omap: fix section mismatch errors

PATCH In review Sanjeev Premi 1 participant 2 messages Aug 16, 2010 – Sep 3, 2010

lore
Share & tools
lore
#0 lore raw

cover omap: fix section mismatch errors

Multiple section mismatches are observed with the latest master. While attempting to fix the ones listed below, I came across more instances.

The patch in this series fixes all these issues.

Though most of the changes are straight-forward, but for these (for now annotated as ___refdata):

1) arch/arm/plat-omap/cpu-omap.c
Variable omap_driver may be required beyond __init lifetime.

2) drivers/mfd/twl-core.c
Variable twl_driver is used both in __init and __exit context.

There are few more similar errors in some of the modules would submit them separately.

WARNING: vmlinux.o(.text+0x187c0): Section mismatch in reference from the function zoom_twl_gpio_setup() to the (unknown reference) .init.data:(unknown) The function zoom_twl_gpio_setup() references
the (unknown reference) __initdata (unknown).
This is often because zoom_twl_gpio_setup lacks a __initdata
annotation or the annotation of (unknown) is wrong.

WARNING: vmlinux.o(.text+0x189b0): Section mismatch in reference from the function cm_t35_twl_gpio_setup() to the (unknown reference) .init.data:(unknown) The function cm_t35_twl_gpio_setup() references
the (unknown reference) __initdata (unknown).
This is often because cm_t35_twl_gpio_setup lacks a __initdata
annotation or the annotation of (unknown) is wrong.

WARNING: vmlinux.o(.data+0x19e38): Section mismatch in reference from the variable h4_config to the (unknown reference) .init.data:(unknown) The variable h4_config references
the (unknown reference) __initdata (unknown)
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: vmlinux.o(.data+0x1a670): Section mismatch in reference from the variable sdp2430_config to the (unknown reference) .init.data:(unknown) The variable sdp2430_config references
the (unknown reference) __initdata (unknown)
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: vmlinux.o(.data+0x1ac50): Section mismatch in reference from the variable apollon_config to the (unknown reference) .init.data:(unknown) The variable apollon_config references
the (unknown reference) __initdata (unknown)
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: vmlinux.o(.data+0x2e378): Section mismatch in reference from the variable omap_driver to the function .init.text:omap_cpu_init() The variable omap_driver references
the function __init omap_cpu_init()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: vmlinux.o(.data+0x1b9dcc): Section mismatch in reference from the variable twl_driver to the function .init.text:twl_probe() The variable twl_driver references
the function __init twl_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Sanjeev Premi (1):
omap: fix section mismatch errors

 arch/arm/mach-omap2/board-2430sdp.c          |    2 +-
 arch/arm/mach-omap2/board-apollon.c          |    2 +-
 arch/arm/mach-omap2/board-cm-t35.c           |    8 ++++----
 arch/arm/mach-omap2/board-h4.c               |    2 +-
 arch/arm/mach-omap2/board-zoom-peripherals.c |   18 +++++++++---------
 arch/arm/plat-omap/cpu-omap.c                |    2 +-
 drivers/mfd/twl-core.c                       |    2 +-
 7 files changed, 18 insertions(+), 18 deletions(-)
#1 lore raw
Quoted 97 lines

-----Original Message-----
From: Premi, Sanjeev
Sent: Monday, August 16, 2010 9:01 PM
To: [email protected]
Cc: Premi, Sanjeev
Subject: [PATCH 0/1] omap: fix section mismatch errors

Multiple section mismatches are observed with the latest master. While attempting to fix the ones listed below, I came across more instances.

The patch in this series fixes all these issues.

Though most of the changes are straight-forward, but for these (for now annotated as ___refdata):

1) arch/arm/plat-omap/cpu-omap.c
Variable omap_driver may be required beyond __init lifetime.

2) drivers/mfd/twl-core.c
Variable twl_driver is used both in __init and __exit context.

There are few more similar errors in some of the modules would submit them separately.

WARNING: vmlinux.o(.text+0x187c0): Section mismatch in reference from the function zoom_twl_gpio_setup() to the (unknown reference) .init.data:(unknown)
The function zoom_twl_gpio_setup() references
the (unknown reference) __initdata (unknown).
This is often because zoom_twl_gpio_setup lacks a __initdata annotation or the annotation of (unknown) is wrong.

WARNING: vmlinux.o(.text+0x189b0): Section mismatch in reference from the function cm_t35_twl_gpio_setup() to the (unknown reference) .init.data:(unknown)
The function cm_t35_twl_gpio_setup() references
the (unknown reference) __initdata (unknown).
This is often because cm_t35_twl_gpio_setup lacks a __initdata annotation or the annotation of (unknown) is wrong.

WARNING: vmlinux.o(.data+0x19e38): Section mismatch in reference from the variable h4_config to the (unknown reference) .init.data:(unknown)
The variable h4_config references
the (unknown reference) __initdata (unknown)
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: vmlinux.o(.data+0x1a670): Section mismatch in reference from the variable sdp2430_config to the (unknown reference) .init.data:(unknown)
The variable sdp2430_config references
the (unknown reference) __initdata (unknown)
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: vmlinux.o(.data+0x1ac50): Section mismatch in reference from the variable apollon_config to the (unknown reference) .init.data:(unknown)
The variable apollon_config references
the (unknown reference) __initdata (unknown)
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: vmlinux.o(.data+0x2e378): Section mismatch in reference from the variable omap_driver to the function .init.text:omap_cpu_init()
The variable omap_driver references
the function __init omap_cpu_init()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: vmlinux.o(.data+0x1b9dcc): Section mismatch in reference from the variable twl_driver to the function .init.text:twl_probe()
The variable twl_driver references
the function __init twl_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Sanjeev Premi (1):
omap: fix section mismatch errors

Quoted 11 lines
 arch/arm/mach-omap2/board-2430sdp.c          |    2 +-
 arch/arm/mach-omap2/board-apollon.c          |    2 +-
 arch/arm/mach-omap2/board-cm-t35.c           |    8 ++++----
 arch/arm/mach-omap2/board-h4.c               |    2 +-
 arch/arm/mach-omap2/board-zoom-peripherals.c |   18 
+++++++++---------
 arch/arm/plat-omap/cpu-omap.c                |    2 +-
 drivers/mfd/twl-core.c                       |    2 +-
 7 files changed, 18 insertions(+), 18 deletions(-)

Hi Tony,

Did you look at this as well?

Best regards,
Sanjeev