Skip to contentSkip to conversation

misc: Add Tunnel creek In-Vehicle I2C loader driver

PATCH New Richard Röjfors 1 participant 1 message Sep 8, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 misc: Add Tunnel creek In-Vehicle I2C loader driver

Since X86 lacks board config this drivers adds I2C devices to a I2C bus. It adds the devices that will exists on Tunnel creek In-Vehicle development boards.

So far only the TSC2007 is added.

---

drivers/misc/Kconfig +10 -0
index 0b591b6..74ef860 100644
@@ -390,6 +390,16 @@ config BMP085
 	  To compile this driver as a module, choose M here: the
 	  module will be called bmp085.
 
+config TC_IVI_I2C_LOADER
+	tristate "Tunnel creek In-Vehicle I2C loader driver"
+	depends on I2C && GPIOLIB
+	help
+	  If you say yes here you will get support for the Tunnel creek
+	  In-Vehicle I2C loader driver.
+
+	  Since X86 don't have any board config this driver adds I2C devices
+	  to the I2C bus.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
drivers/misc/Makefile +1 -0
index 255a80d..a64d07e 100644
@@ -27,6 +27,7 @@ obj-$(CONFIG_ISL29003)		+= isl29003.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 obj-$(CONFIG_EP93XX_PWM)	+= ep93xx_pwm.o
 obj-$(CONFIG_DS1682)		+= ds1682.o
+obj-$(CONFIG_TC_IVI_I2C_LOADER)	+= tc_ivi_i2c_loader.o
 obj-$(CONFIG_TI_DAC7512)	+= ti_dac7512.o
 obj-$(CONFIG_C2PORT)		+= c2port/
 obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
drivers/misc/tc_ivi_i2c_loader.c new file +114 -0

114 lines not on this page · raw message