drivers/net/wireless/ath/ath5k/reg.h Update broken web addresses.
Subsystems (2)
PATCH 100/223 drivers/net/wireless/ath/ath5k/reg.h Update broken web addresses.
Below you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/net/wireless/ath/ath5k/reg.h | 8 ++------ 1 files changed, 2 insertions(+), 6 deletions(-)
drivers/net/wireless/ath/ath5k/reg.h +2 -6
@@ -23,10 +23,7 @@* * I tried to document those registers by looking at ar5k code, some * 802.11 (802.11e mostly) papers and by reading various public available -* Atheros presentations and papers like these: -* -* 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf -* http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf +* Atheros presentations and papers: * * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf *
@@ -1047,8 +1044,7 @@* check the eeprom status register * * For more infos check eeprom_* functs and the ar5k.c -* file posted in madwifi-devel mailing list. -* http://sourceforge.net/mailarchive/message.php?msg_id=8966525 +* http://wireless.kernel.org/en/users/Drivers/ath5k * */ #define AR5K_EEPROM_BASE 0x6000
Signature · 1 line
1.7.2.1
PATCH 101/223 drivers/net/pcmcia/3c574_cs.c Update broken web addresses.
Below you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/net/pcmcia/3c574_cs.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/pcmcia/3c574_cs.c +1 -1
@@ -62,7 +62,7 @@ invalid ramWidth is Very Bad. V. References http://www.scyld.com/expert/NWay.html -http://www.national.com/pf/DP/DP83840.html +http://www.national.com/opf/DP/DP83840A.html#Overview Thanks to Terry Murphy of 3Com for providing development information for earlier 3Com products.
Signature · 1 line
1.7.2.1
PATCH 102/223 drivers/net/tokenring/tms380tr.c Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/net/tokenring/tms380tr.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/tokenring/tms380tr.c +1 -1
@@ -5,7 +5,7 @@* Originally sktr.c: Written 1997 by Christoph Goos * * A fine result of the Linux Systems Network Architecture Project. -* http://www.linux-sna.org +* http://www.vanheusden.com/sna/ * * This software may be used and distributed according to the terms * of the GNU General Public License, incorporated herein by reference.
Signature · 1 line
1.7.2.1
PATCH 103/223 drivers/net/tokenring/Kconfig Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/net/tokenring/Kconfig | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)
drivers/net/tokenring/Kconfig +1 -2
@@ -100,8 +100,7 @@ config TMS380TR read the Token-Ring mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - Also read the file <file:Documentation/networking/tms380tr.txt> or - check <http://www.auk.cx/tms380tr/>. + Also read the file <file:Documentation/networking/tms380tr.txt> To compile this driver as a module, choose M here: the module will be called tms380tr.
Signature · 1 line
1.7.2.1
PATCH 104/223 drivers/net/atp.c Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/net/atp.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/atp.c +1 -1
@@ -68,7 +68,7 @@ static int xcvr[NUM_UNITS]; /* The data transfer mode. */ In 1997 Realtek made available the documentation for the second generation RTL8012 chip, which has lead to several driver improvements. - http://www.realtek.com.tw/cn/cn.html + http://www.realtek.com.tw/ Theory of Operation
Signature · 1 line
1.7.2.1
PATCH 105/223 drivers/net/Kconfig Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/net/Kconfig | 37 +++++++++++++++---------------------- 1 files changed, 15 insertions(+), 22 deletions(-)
drivers/net/Kconfig +15 -22
@@ -169,9 +169,7 @@ config NET_SB1000 a connection. Further documentation and the necessary scripts can be found at: - <http://www.jacksonville.net/~fventuri/> - <http://home.adelphia.net/~siglercm/sb1000.html> - <http://linuxpower.cx/~cable/> + <http://web.archive.org/web/*/http://www.jacksonville.net/~fventuri/> If you don't have this card, of course say N.
@@ -921,7 +919,7 @@ config SMC91X including the SMC91C94 and the SMC91C111. Say Y if you want it compiled into the kernel, and read the file <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, - available from <http://www.linuxdoc.org/docs.html#howto>. + available from <http://www.tldp.org/docs.html#howto>. This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want).
@@ -1031,7 +1029,7 @@ config SMC911X including the new LAN9115, LAN9116, LAN9117, and LAN9118. Say Y if you want it compiled into the kernel, and read the Ethernet-HOWTO, available from - <http://www.linuxdoc.org/docs.html#howto>. + <http://www.tldp.org/docs.html#howto>. This driver is also available as a module. The module will be called smc911x. If you want to compile it as a module, say M
@@ -1511,10 +1509,6 @@ config E100 to identify the adapter. - For the latest Intel PRO/100 network driver for Linux, see: - - <http://appsr.intel.com/scripts-df/support_intel.asp> - More specific information on configuring the driver is in <file:Documentation/networking/e100.txt>.
@@ -1541,7 +1535,7 @@ config FEALNX help Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet cards. Specifications and data at - <http://www.myson.com.hk/mtd/datasheet/>. + <http://www.datasheetarchive.com/datasheet-pdf/022/DSA00384882.html>. config NATSEMI tristate "National Semiconductor DP8381x series PCI Ethernet support"
@@ -1552,7 +1546,7 @@ config NATSEMI which is used in cards from PureData, NetGear, Linksys and others, including the 83815 chip. More specific information and updates are available from - <http://www.scyld.com/network/natsemi.html>. + <http://www.penguincomputing.com/>. config NE2K_PCI tristate "PCI NE2000 and clones support (see help)"
@@ -1703,7 +1697,7 @@ config EPIC100 This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC, which is based on the SMC83c17x (EPIC/100). More specific information and updates are available from - <http://www.scyld.com/network/epic100.html>. + <http://www.penguincomputing.com/>. config SMSC9420 tristate "SMSC LAN9420 PCI ethernet adapter support"
@@ -1715,7 +1709,7 @@ config SMSC9420 This is a driver for SMSC's LAN9420 PCI ethernet adapter. Say Y if you want it compiled into the kernel, and read the Ethernet-HOWTO, available from - <http://www.linuxdoc.org/docs.html#howto>. + <http://www.tldp.org/docs.html#howto>. This driver is also available as a module. The module will be called smsc9420. If you want to compile it as a module, say M
@@ -1729,7 +1723,7 @@ config SUNDANCE help This driver is for the Sundance "Alta" chip. More specific information and updates are available from - <http://www.scyld.com/network/sundance.html>. + <http://www.penguincomputing.com/>. config SUNDANCE_MMIO bool "Use MMIO instead of PIO"
@@ -2201,7 +2195,7 @@ config YELLOWFIN Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is used by the Beowulf Linux cluster project. See - <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more + <http://www.beowulf.org/> for more information about this driver in particular and Beowulf in general. To compile this driver as a module, choose M here: the module
@@ -2550,7 +2544,7 @@ config CHELSIO_T1 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <[email protected]>.
@@ -2582,7 +2576,7 @@ config CHELSIO_T3 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <[email protected]>.
@@ -2607,7 +2601,7 @@ config CHELSIO_T4 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <[email protected]>.
@@ -2630,7 +2624,7 @@ config CHELSIO_T4VF our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <[email protected]>.
@@ -3048,7 +3042,6 @@ config PLIP <file:Documentation/networking/PLIP.txt>. The cables can be up to 15m long. Mode 0 works also if one of the machines runs DOS/Windows and has some PLIP software installed, e.g. the Crynwr PLIP packet - driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>) and winsock or NCSA's telnet. If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
@@ -3262,8 +3255,8 @@ config SLIP_COMPRESSED <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which allows you to use SLIP over a regular dial up shell connection, you definitely want to say Y here. The NET-3-HOWTO, available from - <http://www.tldp.org/docs.html#howto>, explains how to configure - CSLIP. This won't enlarge your kernel. + <http://web.archive.org/web/*/http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>, + explains how to configure CSLIP. This won't enlarge your kernel. config SLHC tristate
Signature · 1 line
1.7.2.1