drivers/net/natsemi.c Update broken web addresses.
Subsystems (8)
PATCH 121/223 drivers/net/natsemi.c Update broken web addresses.
Below you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/net/natsemi.c | 10 +++------- 1 files changed, 3 insertions(+), 7 deletions(-)
drivers/net/natsemi.c +3 -7
@@ -19,9 +19,7 @@ Annapolis MD 21403 Support information and updates available at - http://www.scyld.com/network/netsemi.html - [link no longer provides useful info -jgarzik] - + http://www.penguincomputing.com/ TODO: * big endian support with CFG:BEM instead of cpu_to_le32
@@ -207,9 +205,7 @@ recieve and transmit paths which are synchronised using a combination of hardware descriptor ownership, disabling interrupts and NAPI poll scheduling. IVb. References - -http://www.scyld.com/expert/100mbps.html -http://www.scyld.com/expert/NWay.html +http://www.penguincomputing.com/ Datasheet is available from: http://www.national.com/pf/DP/DP83815.html
@@ -223,7 +219,7 @@ None characterised./* * Support for fibre connections on Am79C874: * This phy needs a special setup when connected to a fibre cable. -* http://www.amd.com/files/connectivitysolutions/networking/archivednetworking/22235.pdf + * http://web.archive.org/web/*/http://www.amd.com/files/connectivitysolutions/networking/archivednetworking/22235.pdf */#define PHYID_AM79C874 0x0022561b
Signature · 1 line
1.7.2.1
PATCH 122/223 drivers/parisc/README.dino Update broken web addresses.
Below you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/parisc/README.dino | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)
drivers/parisc/README.dino +1 -2
@@ -10,8 +10,7 @@ ** PCI bus. HP-supplied graphics cards that utilize the PCI bus are ** not affected." ** -** REVISIT: "go/pci_defect" link below is stale. -** HP Internal can use <http://hpfcdma.fc.hp.com:80/Dino/> +** http://www.hp.com/#Product ** ** Product First Good Serial Number ** C200/C240 (US) US67350000
Signature · 1 line
1.7.2.1
PATCH 123/223 drivers/parport/Kconfig Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/parport/Kconfig | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/parport/Kconfig +2 -2
@@ -18,8 +18,8 @@ menuconfig PARPORT <file:drivers/parport/BUGS-parport>. For extensive information about drivers for many devices attaching - to the parallel port see <http://www.torque.net/linux-pp.html> on - the WWW. + to the parallel port see + http://web.archive.org/web/*/http://www.torque.net/linux-pp.html. It is possible to share a single parallel port among several devices and it is safe to compile all the corresponding drivers into the
Signature · 1 line
1.7.2.1
PATCH 124/223 drivers/pci/quirks.c Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/pci/quirks.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/pci/quirks.c +2 -2
@@ -205,7 +205,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quir/* * VIA Apollo KT133 needs PCI latency patch * Made according to a windows driver based patch by George E. Breese -* see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm +* see PCI Latency Adjust on http://www.sudhian.com/ * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for * the info on which Mr Breese based his work. *
@@ -996,7 +996,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge)/* * Common misconfiguration of the MediaGX/Geode PCI master that will * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 -* datasheets found at http://www.national.com/ds/GX for info on what +* datasheets found at http://www.national.com/analog for info on what * these bits do. <[email protected]> */ static void quirk_mediagx_master (struct pci_dev *dev)
Signature · 1 line
1.7.2.1
PATCH 125/223 drivers/pcmcia/yenta_socket.c Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/pcmcia/yenta_socket.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/pcmcia/yenta_socket.c +1 -1
@@ -1073,7 +1073,7 @@ static void yenta_config_init(struct yenta_socket *socket)* invisible during PCI scans because of a misconfigured subordinate number * of the parent brige - some BIOSes seem to be too lazy to set it right. * Does the fixup carefully by checking how far it can go without conflicts. -* See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. +* See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. */ static void yenta_fixup_parent_bridge (struct pci_bus *cardbus_bridge) {
Signature · 1 line
1.7.2.1
PATCH 126/223 drivers/pnp/pnpbios/proc.c Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/pnp/pnpbios/proc.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)
drivers/pnp/pnpbios/proc.c +0 -1
@@ -11,7 +11,6 @@* * The .../escd file is utilized by the lsescd utility written by * Gunther Mayer. -* http://home.t-online.de/home/gunther.mayer/lsescd * * The .../legacy_device_resources file is not used yet. *
Signature · 1 line
1.7.2.1
PATCH 127/223 drivers/scsi/scsi_debug.c Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/scsi/scsi_debug.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/scsi_debug.c +2 -2
@@ -555,8 +555,8 @@ static int inquiry_evpd_84(unsigned char * arr)static int inquiry_evpd_85 (unsigned char * arr) {int num =0 ; -const char * na1 ="https://www.kernel.org/config" ; -const char * na2 ="http://www.kernel.org/log" ; +const char * na1 ="https://www.kernel.org" ; +const char * na2 ="http://www.kernel.org" ;int plen, olen; arr[num++] =0x1 ;/* lu, storage config */
Signature · 1 line
1.7.2.1
PATCH 128/223 drivers/scsi/ibmmca.c Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/scsi/ibmmca.c | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-)
drivers/scsi/ibmmca.c +0 -2
@@ -7,8 +7,6 @@ See the file Documentation/scsi/ibmmca.txt for a detailed description of this driver, the commandline arguments and the history of its development. - See the WWW-page: http://www.uni-mainz.de/~langm000/linux.html for latest - updates, info and ADF-files for adapters supported by this driver. Alan Cox <[email protected]> Updated for Linux 2.5.45 to use the new error handler, cleaned up the
Signature · 1 line
1.7.2.1
PATCH 129/223 drivers/scsi/Kconfig Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/scsi/Kconfig | 14 +++++++------- 1 files changed, 7 insertions(+), 7 deletions(-)
drivers/scsi/Kconfig +7 -7
@@ -116,7 +116,7 @@ config CHR_DEV_OSST <http://www.tldp.org/docs.html#howto> and <file:Documentation/scsi/osst.txt> in the kernel source. More info on the OnStream driver may be found on - <http://linux1.onstream.nl/test/> + <http://web.archive.org/web/*/http://linux1.onstream.nl/test/> Please also have a look at the standard st docu, as most of it applies to osst as well.
@@ -156,9 +156,9 @@ config CHR_DEV_SG directly, so you need some additional software which knows how to talk to these devices using the SCSI protocol: - For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD + For scanners, look at SANE (<http://www.sane-project.org/>). For CD writer software look at Cdrtools - (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>) + (<http://cdrecord.berlios.de/private/cdrecord.html>) and for burning a "disk at once": CDRDAO (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
@@ -949,7 +949,7 @@ config SCSI_IPS depends on PCI && SCSI ---help--- This is support for the IBM ServeRAID hardware RAID controllers. - See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html> + See <http://www.ibm.com/us/en/> for more information. If this driver does not work correctly without modification please contact the author by email at <[email protected]>.
@@ -1608,9 +1608,9 @@ config SCSI_DEBUG each with multiple dummy SCSI devices (disks). It defaults to one host adapter with one dummy SCSI disk. Each dummy disk uses kernel RAM as storage (i.e. it is a ramdisk). To save space when multiple - dummy disks are simulated, they share the same kernel RAM for - their storage. See <http://www.torque.net/sg/sdebug.html> for more - information. This driver is primarily of use to those testing the + dummy disks are simulated, they share the same kernel RAM for their + storage. See <http://web.archive.org/web/*/http://www.torque.net/sg/sdebug.html> + for more information. This driver is primarily of use to those testing the SCSI and block subsystems. If unsure, say N. config SCSI_MESH
Signature · 1 line
1.7.2.1
Re: [PATCH 129/223]drivers/scsi/Kconfig Update broken web addresses.
Quoted 14 lines · On Thu, 9 Sep 2010 15:37:36 -0700 Justin P. Mattock wrote:
Below you will find an Update to a broken web address. Please let me know if this needs to be changed.
Signed-off-by Justin P. Mattock <[email protected]>--- drivers/scsi/Kconfig | 14 +++++++------- 1 files changed, 7 insertions(+), 7 deletions(-)drivers/scsi/Kconfig +0
-0
drivers/scsi/Kconfig config SCSI_DEBUG · line 1614
Quoted 10 lines
drivers/scsi/Kconfig +3
-3@@ -1608,9 +1608,9 @@ config SCSI_DEBUG each with multiple dummy SCSI devices (disks). It defaults to one host adapter with one dummy SCSI disk. Each dummy disk uses kernel RAM as storage (i.e. it is a ramdisk). To save space when multiple - dummy disks are simulated, they share the same kernel RAM for - their storage. See <http://www.torque.net/sg/sdebug.html> for more - information. This driver is primarily of use to those testing the + dummy disks are simulated, they share the same kernel RAM for their + storage. See <http://web.archive.org/web/*/http://www.torque.net/sg/sdebug.html> + for more information. This driver is primarily of use to those testing the SCSI and block subsystems. If unsure, say N.
This one should be <http://sg.danny.cz/sg/sdebug26.html>
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
Re: [PATCH 129/223]drivers/scsi/Kconfig Update broken web addresses.
Quoted 29 lines · Randy Dunlap
Quoted 14 lines · On Thu, 9 Sep 2010 15:37:36 -0700 Justin P. Mattock wrote:
Below you will find an Update to a broken web address. Please let me know if this needs to be changed.
Signed-off-by Justin P. Mattock<[email protected]>--- drivers/scsi/Kconfig | 14 +++++++------- 1 files changed, 7 insertions(+), 7 deletions(-)drivers/scsi/Kconfig +0
-0drivers/scsi/Kconfig config SCSI_DEBUG · line 1614
Quoted 10 lines
drivers/scsi/Kconfig +3
-3@@ -1608,9 +1608,9 @@ config SCSI_DEBUG each with multiple dummy SCSI devices (disks). It defaults to one host adapter with one dummy SCSI disk. Each dummy disk uses kernel RAM as storage (i.e. it is a ramdisk). To save space when multiple - dummy disks are simulated, they share the same kernel RAM for - their storage. See<http://www.torque.net/sg/sdebug.html> for more - information. This driver is primarily of use to those testing the + dummy disks are simulated, they share the same kernel RAM for their + storage. See<http://web.archive.org/web/*/http://www.torque.net/sg/sdebug.html> + for more information. This driver is primarily of use to those testing the SCSI and block subsystems. If unsure, say N.This one should be<http://sg.danny.cz/sg/sdebug26.html>
Quoted 4 lines
---
~Randy
*** Remember to useDocumentation/SubmitChecklistwhen testing your code ***
cool, thanks..
Justin P. Mattock
PATCH 130/223 drivers/scsi/arm/Kconfig Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/scsi/arm/Kconfig | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/scsi/arm/Kconfig +1 -1
@@ -39,7 +39,7 @@ config SCSI_ARXESCSI HD discs from the then new A5000 on earlier models. This interface was either sold on its own or with an integral SCSI controller. Technical details on this NCR53c94-based device are available at - <http://www.cryton.demon.co.uk/acornbits/scsi_arxe.html> + <http://web.archive.org/web/*/http://www.cryton.demon.co.uk/acornbits/scsi_arxe.html> Say Y here to compile in support for the SCSI controller. config SCSI_CUMANA_2
Signature · 1 line
1.7.2.1
PATCH 131/223 drivers/serial/sn_console.c Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/serial/sn_console.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/serial/sn_console.c +1 -1
@@ -34,7 +34,7 @@* * For further information regarding this notice, see: * -* http://oss.sgi.com/projects/GenInfo/NoticeExplan +* http://oss.sgi.com/projects/failsafe/docs/LnxFailSafe_PG/html/fpcontent.html */ #include <linux/interrupt.h>
Signature · 1 line
1.7.2.1
PATCH 132/223 drivers/serial/8250.c Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/serial/8250.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/serial/8250.c +1 -1
@@ -924,7 +924,7 @@ static int broken_efr(struct uart_8250_port *up)/* * Exar ST16C2550 "A2" devices incorrectly detect as * having an EFR, and report an ID of 0x0201. See -* http://www.exar.com/info.php?pdf=dan180_oct2004.pdf +* http://www.exar.com/ */ if (autoconfig_read_divisor_id (up) ==0x0201 &&size_fifo (up) ==16 )return 1 ;
Signature · 1 line
1.7.2.1
PATCH 133/223 drivers/serial/bfin_sport_uart.c Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/serial/bfin_sport_uart.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/serial/bfin_sport_uart.c +1 -1
@@ -10,7 +10,7 @@/* * This driver and the hardware supported are in term of EE-191 of ADI. -* http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf +* http://www.analog.com/static/imported-files/application_notes/EE191.pdf * This application note describe how to implement a UART on a Sharc DSP, * but this driver is implemented on Blackfin Processor. * Transmit Frame Sync is not used by this driver to transfer data out.
Signature · 1 line
1.7.2.1
Re: [PATCH 133/223]drivers/serial/bfin_sport_uart.c Update broken web addresses.
Quoted 2 lines · Justin P. Mattock
Below you will find an Update to a broken web address. Please let me know if this needs to be changed.
thanks, this is OK
-mike
PATCH 134/223 drivers/serial/uartlite.c Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/serial/uartlite.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/serial/uartlite.c +1 -1
@@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(of, ulite_of_match);* Register definitions * * For register details see datasheet: -* http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf +* http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf */ #define ULITE_RX 0x00
Signature · 1 line
1.7.2.1
PATCH 135/223 drivers/serial/bfin_sport_uart.h Update broken web addresses.
In reply to Justin P. MattockBelow you will find an Update to a broken web address. Please let me know if this needs to be changed.
--- drivers/serial/bfin_sport_uart.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/serial/bfin_sport_uart.h +1 -1
@@ -10,7 +10,7 @@/* * This driver and the hardware supported are in term of EE-191 of ADI. -* http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf +* http://www.analog.com/static/imported-files/application_notes/EE191.pdf * This application note describe how to implement a UART on a Sharc DSP, * but this driver is implemented on Blackfin Processor. * Transmit Frame Sync is not used by this driver to transfer data out.
Signature · 1 line
1.7.2.1
Re: [PATCH 135/223]drivers/serial/bfin_sport_uart.h Update broken web addresses.
Quoted 2 lines · Justin P. Mattock
Below you will find an Update to a broken web address. Please let me know if this needs to be changed.
thanks, this is OK
-mike
Re: [PATCH 135/223]drivers/serial/bfin_sport_uart.h Update broken web addresses.
Quoted 7 lines · Mike Frysinger
Quoted 2 lines · Justin P. Mattock
Below you will find an Update to a broken web address. Please let me know if this needs to be changed.
thanks, this is OK
-mike
alright..cool
Justin P. Mattock