Skip to contentSkip to conversation

Config: Add "board options" column to boards.cfg

PATCH Superseded Marek Vasut 3 participants 3 messages Sep 20, 2010 – Sep 21, 2010 Kbuild

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Config: Add "board options" column to boards.cfg

There are some boards where it's not currently possible to detect all board information at runtime, therefore I introduced a new column called "options" to boards.cfg .

This column can contain multiple options, separated by comma [,] . This column is case sensitive. In case there's a simple options like 256M_U_BOOT, it's plain expanded to "#define CONFIG_256M_U_BOOT" in config.h . In case there's an assignment, like "ram=8192", it's expanded to "#define CONFIG_RAM 8192" in config.h . There can also be multiple such options, then each is expanded to separate "#define CONFIG_xyz" statement.

Also, I had to add fallback logic, because each of the board variants has a distinct name. This led to the mkconfig #including incorrect board configuration file (<configs/whole-board-configuration-name.h> aka. the value in column one). I implemented a logic which checks if such file exists and if it does not, it includes<configs/board-name.h> aka. the value in third column.

---
v2: Add multiple options support

 Makefile   |   22 ----------------------
 boards.cfg |    9 +++++++--
 mkconfig   |   20 +++++++++++++++++++-
 3 files changed, 26 insertions(+), 25 deletions(-)
Makefile +0 -22
index 4dc68a5..1e5374e 100644
@@ -2179,28 +2179,6 @@ scpu_config:	unconfig
 	fi
 	@$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive
 
-polaris_config \
-trizepsiv_config	:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring polaris,$@)" ] ; then \
-		echo "#define CONFIG_POLARIS 1"	>>$(obj)include/config.h ; \
-	fi;
-	@$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv
-
-vpac270_nor_256M_config \
-vpac270_nor_128M_config \
-vpac270_onenand_config	: unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring onenand,$@)" ] ; then \
-		echo "#define CONFIG_ONENAND_U_BOOT" \
-			>>$(obj)include/config.h ; \
-	fi;
-	@if [ "$(findstring 256M,$@)" ] ; then \
-		echo "#define CONFIG_256M_U_BOOT" \
-			>>$(obj)include/config.h ; \
-	fi;
-	@$(MKCONFIG) -n $@ -a vpac270 arm pxa vpac270
-
 #########################################################################
 ## ARM1136 Systems
 #########################################################################
boards.cfg +7 -2
index 7ee733c..6c47448 100644
@@ -17,8 +17,8 @@
 #
 #	:.,$! sort -f -k2,2 -k3,3 -k6,6 -k5,5 -k1,1
 #
-# Target	ARCH	CPU		Board name	Vendor		SoC
-###########################################################################
+# Target	ARCH	CPU		Board name	Vendor		SoC		Options
+###############################################################################################
 
 qong		arm	arm1136		-		davedenx	mx31
 mx31ads		arm	arm1136		-		freescale	mx31
@@ -64,6 +64,11 @@ lubbock		arm	pxa
 palmld		arm	pxa
 palmtc		arm	pxa
 pleb2		arm	pxa
+polaris		arm	pxa		trizepsiv	-		-		POLARIS
+trizepsiv	arm	pxa		trizepsiv
+vpac270_nor_128M arm	pxa		vpac270
+vpac270_nor_256M arm	pxa		vpac270		-		-		256M_U_BOOT
+vpac270_onenand	arm	pxa		vpac270		-		-		ONENAND_U_BOOT
 xaeniax		arm	pxa
 xm250		arm	pxa
 zipitz2		arm	pxa
mkconfig +19 -1
index b661071..f877b83 100755
@@ -17,6 +17,7 @@ cpu=""
 board=""
 vendor=""
 soc=""
+options=""
 
 if [ \( $# -eq 2 \) -a \( "$1" = "-A" \) ] ; then
 	# Automatic mode
@@ -41,7 +42,7 @@ while [ $# -gt 0 ] ; do
 done
 
 [ $# -lt 4 ] && exit 1
-[ $# -gt 6 ] && exit 1
+[ $# -gt 7 ] && exit 1
 
 CONFIG_NAME="${1%_config}"
 
@@ -56,6 +57,7 @@ else
 fi
 [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
 [ $# -gt 5 ] && [ "$6" != "-" ] && soc="$6"
+[ $# -gt 6 ] && [ "$7" != "-" ] && options="$7"
 
 if [ "${ARCH}" -a "${ARCH}" != "${arch}" ]; then
 	echo "Failed: \$ARCH=${ARCH}, should be '${arch}' for ${BOARD_NAME}" 1>&2
@@ -129,6 +131,22 @@ for i in ${TARGETS} ; do
 	echo "#define CONFIG_MK_${i} 1" >>config.h ;
 done
 
+if [ -n "${options}" ] ; then
+	echo "${options}" | tr "," "\n" | while read line ; do
+		echo "#define CONFIG_${line}" | tr "=" "\t" >>config.h ;
+	done ;
+fi
+
+# If there's no config file for the configuration, try config file for the
+# board instead.
+if [ ! -e configs/${CONFIG_NAME}.h ] ; then
+	if [ -e configs/${board}.h ] ; then
+		CONFIG_NAME=${board} ;
+	else
+		exit 1 ;
+	fi;
+fi
+
 cat << EOF >> config.h
 #define CONFIG_BOARDDIR board/$BOARDDIR
 #include <config_defaults.h>
Signature · 1 line
1.7.1
#1 lore raw

PATCH 1/1 Config: Add "board options" column to boards.cfg

Quoted 11 lines · On Monday, September 20, 2010 19:26:44 Marek Vasut wrote:

There are some boards where it's not currently possible to detect all board information at runtime, therefore I introduced a new column called "options" to boards.cfg .

This column can contain multiple options, separated by comma [,] . This column is case sensitive. In case there's a simple options like 256M_U_BOOT, it's plain expanded to "#define CONFIG_256M_U_BOOT" in config.h . In case there's an assignment, like "ram=8192", it's expanded to "#define CONFIG_RAM 8192" in config.h . There can also be multiple such options, then each is expanded to separate "#define CONFIG_xyz" statement.

Quoted 6 lines

Also, I had to add fallback logic, because each of the board variants has a distinct name. This led to the mkconfig #including incorrect board configuration file (<configs/whole-board-configuration-name.h> aka. the value in column one). I implemented a logic which checks if such file exists and if it does not, it includes<configs/board-name.h> aka. the value in third column.

why not use the existing -t option instead of introducing your own new "options" argument t mkconfig ?
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20100920/f0bcccb9/attachment.pgp

#2 lore raw

PATCH 1/1 Config: Add "board options" column to boards.cfg

In reply to Marek Vasut

Dear Marek Vasut,

please fix the mail addresses. My address is wd at denx.de

Quoted 10 lines · In message <[email protected]> you wrote:

There are some boards where it's not currently possible to detect all board information at runtime, therefore I introduced a new column called "options" to boards.cfg .

This column can contain multiple options, separated by comma [,] . This column is case sensitive. In case there's a simple options like 256M_U_BOOT, it's plain expanded to "#define CONFIG_256M_U_BOOT" in config.h . In case there's an assignment, like "ram=8192", it's expanded to "#define CONFIG_RAM 8192" in config.h . There can also be multiple such options, then each is expanded to separate "#define CONFIG_xyz" statement.

I don't understand what you mean by "is case sensitive" when in the end you seem to convert everything to upper case?

I would not make any statement about case sensistivity and copy the settings unchanged. It is up to the user to provide valid (upper case) macro names, and it leaves the option to deviate and use locer case identifiers in case this should ever be needed for some special purpose. Also, it makes the code simpler.

And, as Mike pointed out, please reuse the "-y" option.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is easier to write an incorrect program than understand a  correct
one.