Makefile.fwinst: include Makefile.lib
Subsystems (3)
PATCH 1/5 Makefile.fwinst: include Makefile.lib
Include Makefile.lib into Makefile.fwinst to enable _shipped processing.
--- scripts/Makefile.fwinst | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
scripts/Makefile.fwinst +1 -0
@@ -16,6 +16,7 @@ include scripts/Kbuild.include include $(srctree)/$(obj)/Makefile include scripts/Makefile.host +include scripts/Makefile.lib mod-fw := $(fw-shipped-m) # If CONFIG_FIRMWARE_IN_KERNEL isn't set, then install the
Signature · 1 line
1.5.6.5
PATCH 2/5 Add mkcis - a program that can create .cis from text description
For CIS files (describing hardware on PCMCIA and some other busses) binary file isn't the 'preferred for for modification' in most cases. pcmcia-cs project have developed pack_cis program which can be used (and was used most probably) to generate .cis files from simple text descriptions. Import this code to the kernel under the name of mkcis.
--- firmware/mkcis-lexer.l | 228 ++++ firmware/mkcis-lexer.lex.c_shipped | 2547 +++++++++++++++++++++++++++++++++++ firmware/mkcis-parser.tab.c_shipped | 2259 +++++++++++++++++++++++++++++++ firmware/mkcis-parser.tab.h_shipped | 177 +++ firmware/mkcis-parser.y | 383 ++++++ firmware/mkcis.c | 471 +++++++ firmware/mkcis.h | 49 + 7 files changed, 6114 insertions(+), 0 deletions(-) create mode 100644 firmware/mkcis-lexer.l create mode 100644 firmware/mkcis-lexer.lex.c_shipped create mode 100644 firmware/mkcis-parser.tab.c_shipped create mode 100644 firmware/mkcis-parser.tab.h_shipped create mode 100644 firmware/mkcis-parser.y create mode 100644 firmware/mkcis.c create mode 100644 firmware/mkcis.h
firmware/mkcis-lexer.l new file +228 -0
@@ -0,0 +1,228 @@ +%{ +/* + * lex_cis.l 1.13 2000/06/12 21:34:19 + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * <[email protected]>. Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU Public License version 2 (the "GPL"), in which + * case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use + * your version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#include <stdlib.h> +#include <unistd.h> +#include <string.h> +#include <syslog.h> + +#include <cistpl.h> + +#include "mkcis.h" + +#define YY_NO_INPUT +#include "mkcis-parser.tab.h" + +/* For assembling nice error messages */ +int current_lineno; + +static int lex_number(char *); +static int lex_units(char *, int, int); +static int lex_float(char *); +static int lex_string(char *); + +%} +%option nounput + + +int [0-9]+ +hex 0x[0-9a-fA-F]+ +flt [0-9]+\.[0-9]* +str \"([^"]|\\.)*\" + +%% + +\n current_lineno++; +[ \t]* /* skip */ ; +[ ]*[#;].* /* skip */ ; + +funcid return FUNCID; +mfc return MFC; +manfid return MANFID; +vers_1 return VERS_1; +checksum return CHECKSUM; + +dev_info return DEV_INFO; +attr_dev_info return ATTR_DEV_INFO; +no_info return NO_INFO; +NULL return lex_number("0"); +ROM return lex_number("1"); +EPROM return lex_number("3"); +EEPROM return lex_number("4"); +FLASH return lex_number("5"); +SRAM return lex_number("6"); +DRAM return lex_number("7"); +fn_specific return lex_number("13"); + +config return CONFIG; +base return BASE; +mask return MASK; +last_index return LAST_INDEX; +\[post\] return POST; +\[rom\] return ROM; + +cftable_entry return CFTABLE; +\[default\] return DEFAULT; +\[bvd\] return BVD; +\[wp\] return WP; +\[rdybsy\] return RDYBSY; +\[mwait\] return MWAIT; +\[audio\] return AUDIO; +\[readonly\] return READONLY; +\[pwrdown\] return PWRDOWN; + +Vcc return VCC; +Vpp1 return VPP1; +Vpp2 return VPP2; +Vnom return VNOM; +Vmin return VMIN; +Vmax return VMAX; +Istatic return ISTATIC; +Iavg return IAVG; +Ipeak return IPEAK; +Idown return IDOWN; + +io return IO; +memory return MEM; +\[8bit\] return BIT8; +\[16bit\] return BIT16; +\[lines return LINES; +\[range\] return RANGE; + +irq return IRQ_NO; +\[level\] return LEVEL; +\[pulse\] return PULSE; +\[shared\] return SHARED; + +timing return TIMING; +wait return WAIT; +ready return READY; +reserved return RESERVED; + +multi_function return lex_number("0"); +memory_card return lex_number("1"); +serial_port return lex_number("2"); +parallel_port return lex_number("3"); +fixed_disk return lex_number("4"); +video_adapter return lex_number("5"); +network_adapter return lex_number("6"); +aims_card return lex_number("7"); +scsi_adapter return lex_number("8"); + +{int} return lex_number(yytext); +{hex} return lex_number(yytext); + +{int}b return lex_units(yytext, 1, SIZE); +{int}kb return lex_units(yytext, 1024, SIZE); +{int}mb return lex_units(yytext, 1024*1024, SIZE); + +{flt}s return lex_units(yytext, 1000000000, TIME); +{flt}ms return lex_units(yytext, 1000000, TIME); +{flt}us return lex_units(yytext, 1000, TIME); +{flt}ns return lex_units(yytext, 1, TIME); +{int}s return lex_units(yytext, 1000000000, TIME); +{int}ms return lex_units(yytext, 1000000, TIME); +{int}us return lex_units(yytext, 1000, TIME); +{int}ns return lex_units(yytext, 1, TIME); + +{flt}V return lex_units(yytext, 100000, VOLTAGE); +{flt}mV return lex_units(yytext, 100, VOLTAGE); +{flt}uV return lex_units(yytext, 0.1, VOLTAGE); +{int}V return lex_units(yytext, 100000, VOLTAGE); +{int}mV return lex_units(yytext, 100, VOLTAGE); +{int}uV return lex_units(yytext, 0.1, VOLTAGE); + +{flt}A return lex_units(yytext, 10000000, CURRENT); +{flt}mA return lex_units(yytext, 10000, CURRENT); +{flt}uA return lex_units(yytext, 10, CURRENT); +{int}A return lex_units(yytext, 10000000, CURRENT); +{int}mA return lex_units(yytext, 10000, CURRENT); +{int}uA return lex_units(yytext, 10, CURRENT); + +{flt} return lex_float(yytext); + +{str} return lex_string(yytext); + +. return yytext[0]; + +%% + +#ifndef yywrap +int yywrap() { return 1; } +#endif + +/*====================================================================== + + Stuff to parse basic data types + +======================================================================*/ + +static int lex_number(char *s) +{ + yylval.num = strtoul(s, NULL, 0); + return NUMBER; +} + +static int lex_float(char *s) +{ + yylval.flt = strtod(s, NULL); + return FLOAT; +} + +static int lex_units(char *s, int scale, int token) +{ + float f; + sscanf(s, "%f", &f); + yylval.num = scale*f + 0.5; + return token; +} + +static int lex_string(char *s) +{ + int n = strlen(s); + yylval.str = malloc(n-1); + strncpy(yylval.str, s+1, n-2); + yylval.str[n-2] = '\0'; + return STRING; +} + +/*====================================================================== + + The main parser entry point + +======================================================================*/ + +void parse_cis(FILE *f) +{ + current_lineno = 1; + yyrestart(f); + yyparse(); +} +
firmware/mkcis-lexer.lex.c_shipped new file +2547 -0
2,547 lines not on this page · raw message
firmware/mkcis-parser.tab.c_shipped new file +2259 -0
225 lines not on this page · raw message
firmware/mkcis-parser.tab.h_shipped new file +177 -0
177 lines not on this page · raw message
firmware/mkcis-parser.y new file +383 -0
383 lines not on this page · raw message
firmware/mkcis.c new file +471 -0
471 lines not on this page · raw message
firmware/mkcis.h new file +49 -0
49 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.5.6.5
Part of the diff is not shown here. View the raw message.
PATCH 3/5 firmware: enable usage of mkcis
In reply to Dmitry Eremin-SolenikovEnable usage of mkcis for generation of cis files
--- firmware/Makefile | 44 +++++++++++++++++++++++++++++++++++++++++++- 1 files changed, 43 insertions(+), 1 deletions(-)
firmware/Makefile +43 -1
@@ -156,6 +156,9 @@ quiet_cmd_ihex2fw = IHEX2FW $@ quiet_cmd_h16tofw = H16TOFW $@ cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@ +quiet_cmd_mkcis = MKCIS $@ + cmd_mkcis = $(objtree)/$(obj)/mkcis -o $@ $< + quiet_cmd_fwbin = MK_FW $@ cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \ FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst \
@@ -224,6 +227,11 @@ ihex2fw_dep := else ihex2fw_dep := $(obj)/ihex2fw endif +ifeq ($(INSTALL):$(wildcard $(obj)/mkcis),install:$(obj)/mkcis) +mkcis_dep := +else +mkcis_dep := $(obj)/mkcis +endif # .HEX is also Intel HEX, but where the offset and length in each record # is actually meaningful, because the firmware has to be loaded in a certain
@@ -236,6 +244,10 @@ $(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %) $(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %) $(call cmd,h16tofw) +# .ct is a text representation of CIS files, as originally developed by pcmcia-cs +$(obj)/%.cis: $(obj)/%.ct $(mkcis_dep) | $(objtree)/$(obj)/$$(dir %) + $(call cmd,mkcis) + $(firmware-dirs): $(call cmd,mkdir)
@@ -251,4 +263,34 @@ targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \ # final vmlinux link will fail. obj-n := dummy -hostprogs-y := ihex2fw +hostprogs-y := ihex2fw mkcis + +mkcis-objs := mkcis.o mkcis-lexer.lex.o mkcis-parser.tab.o +$(obj)/mkcis-parser.tab.o: $(obj)/mkcis-parser.tab.c $(obj)/mkcis-parser.tab.h +$(obj)/mkcis-lexer.lex.o: $(obj)/mkcis-lexer.lex.c $(obj)/mkcis-parser.tab.h +HOSTCFLAGS_mkcis.o += -Iinclude/pcmcia +HOSTCFLAGS_mkcis-lexer.lex.o += -Iinclude/pcmcia -Ifirmware/ +HOSTCFLAGS_mkcis-parser.tab.o += -Iinclude/pcmcia -Ifirmware/ +HOSTLOADLIBES_mkcis := -lm + +# GENERATE_PARSER := 1 # Uncomment to rebuild flex/bison output + +ifdef GENERATE_PARSER + +BISON = bison +FLEX = flex + +quiet_cmd_bison = BISON $@ + cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped +quiet_cmd_flex = FLEX $@ + cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped + +$(obj)/mkcis-parser.tab.c: $(src)/mkcis-parser.y FORCE + $(call if_changed,bison) + +$(obj)/mkcis-parser.tab.h: $(obj)/mkcis-parser.tab.c + +$(obj)/mkcis-lexer.lex.c: $(src)/mkcis-lexer.l FORCE + $(call if_changed,flex) + +endif
Signature · 1 line
1.5.6.5
PATCH 5/5 Documentation: add an utility to parse CIS files to readable form
In reply to Dmitry Eremin-SolenikovImport from pcmcia-cs project a dump_cis utility. It reads machine-readable CIS file and output text representation (which can be processed by firmware/mkcis utility).
--- Documentation/pcmcia/Makefile | 3 +- Documentation/pcmcia/dump_cis.c | 1992 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 1994 insertions(+), 1 deletions(-) create mode 100644 Documentation/pcmcia/dump_cis.c
Documentation/pcmcia/Makefile +2 -1
@@ -2,9 +2,10 @@ obj- := dummy.o # List of programs to build -hostprogs-y := crc32hash +hostprogs-y := crc32hash dump_cis # Tell kbuild to always build the programs always := $(hostprogs-y) HOSTCFLAGS_crc32hash.o += -I$(objtree)/usr/include +HOSTCFLAGS_dump_cis.o += -Iinclude/pcmcia
Documentation/pcmcia/dump_cis.c new file +1992 -0
1,992 lines not on this page · raw message
Signature · 1 line
1.5.6.5
PATCH 4/5 firmware: replace ihex files with text descriptions for CIS files
In reply to Dmitry Eremin-SolenikovNow as we support generation of cis files from .ct, drop old ihex files and import new .ct from original pcmcia-cs project.
This brings no actual changes in the binary firmware files.
--- firmware/cis/3CCFEM556.cis.ihex | 13 ----------- firmware/cis/3CCFEM556.ct | 22 +++++++++++++++++++ firmware/cis/3CXEM556.cis.ihex | 13 ----------- firmware/cis/3CXEM556.ct | 22 +++++++++++++++++++ firmware/cis/COMpad2.cis.ihex | 11 --------- firmware/cis/COMpad2.ct | 20 +++++++++++++++++ firmware/cis/COMpad4.cis.ihex | 9 ------- firmware/cis/COMpad4.ct | 14 ++++++++++++ firmware/cis/DP83903.cis.ihex | 14 ------------ firmware/cis/DP83903.ct | 24 ++++++++++++++++++++ firmware/cis/E-CARD.ct | 9 +++++++ firmware/cis/LA-PCM.cis.ihex | 20 ----------------- firmware/cis/LA-PCM.ct | 44 ++++++++++++++++++++++++++++++++++++++ firmware/cis/MT5634ZLX.cis.ihex | 11 --------- firmware/cis/MT5634ZLX.ct | 18 +++++++++++++++ firmware/cis/NE2K.cis.ihex | 8 ------- firmware/cis/NE2K.ct | 10 ++++++++ firmware/cis/PCMLM28.cis.ihex | 18 --------------- firmware/cis/PCMLM28.ct | 37 +++++++++++++++++++++++++++++++ firmware/cis/PE-200.cis.ihex | 9 ------- firmware/cis/PE-200.ct | 11 +++++++++ firmware/cis/PE520.cis.ihex | 9 ------- firmware/cis/PE520.ct | 11 +++++++++ firmware/cis/RS-COM-2P.cis.ihex | 10 -------- firmware/cis/RS-COM-2P.ct | 14 ++++++++++++ firmware/cis/SW_555_SER.cis.ihex | 12 ---------- firmware/cis/SW_555_SER.ct | 19 ++++++++++++++++ firmware/cis/SW_7xx_SER.cis.ihex | 13 ----------- firmware/cis/SW_7xx_SER.ct | 21 ++++++++++++++++++ firmware/cis/SW_8xx_SER.cis.ihex | 13 ----------- firmware/cis/SW_8xx_SER.ct | 20 +++++++++++++++++ firmware/cis/tamarack.cis.ihex | 10 -------- firmware/cis/tamarack.ct | 17 ++++++++++++++ 33 files changed, 333 insertions(+), 193 deletions(-) delete mode 100644 firmware/cis/3CCFEM556.cis.ihex create mode 100644 firmware/cis/3CCFEM556.ct delete mode 100644 firmware/cis/3CXEM556.cis.ihex create mode 100644 firmware/cis/3CXEM556.ct delete mode 100644 firmware/cis/COMpad2.cis.ihex create mode 100644 firmware/cis/COMpad2.ct delete mode 100644 firmware/cis/COMpad4.cis.ihex create mode 100644 firmware/cis/COMpad4.ct delete mode 100644 firmware/cis/DP83903.cis.ihex create mode 100644 firmware/cis/DP83903.ct create mode 100644 firmware/cis/E-CARD.ct delete mode 100644 firmware/cis/LA-PCM.cis.ihex create mode 100644 firmware/cis/LA-PCM.ct delete mode 100644 firmware/cis/MT5634ZLX.cis.ihex create mode 100644 firmware/cis/MT5634ZLX.ct delete mode 100644 firmware/cis/NE2K.cis.ihex create mode 100644 firmware/cis/NE2K.ct delete mode 100644 firmware/cis/PCMLM28.cis.ihex create mode 100644 firmware/cis/PCMLM28.ct delete mode 100644 firmware/cis/PE-200.cis.ihex create mode 100644 firmware/cis/PE-200.ct delete mode 100644 firmware/cis/PE520.cis.ihex create mode 100644 firmware/cis/PE520.ct delete mode 100644 firmware/cis/RS-COM-2P.cis.ihex create mode 100644 firmware/cis/RS-COM-2P.ct delete mode 100644 firmware/cis/SW_555_SER.cis.ihex create mode 100644 firmware/cis/SW_555_SER.ct delete mode 100644 firmware/cis/SW_7xx_SER.cis.ihex create mode 100644 firmware/cis/SW_7xx_SER.ct delete mode 100644 firmware/cis/SW_8xx_SER.cis.ihex create mode 100644 firmware/cis/SW_8xx_SER.ct delete mode 100644 firmware/cis/tamarack.cis.ihex create mode 100644 firmware/cis/tamarack.ct
firmware/cis/3CCFEM556.cis.ihex deleted +0 -13
@@ -1,13 +0,0 @@ -:1000000001030000FF152D050033436F6D004D65A2 -:100010006761686572747A2033434346454D3535D0 -:1000200036004C414E202B2035366B204D6F6465D9 -:100030006D0000FF20040101560521020000060B9F -:1000400002004D000000006B000000FF001303439E -:100050004953210206001A060507001067021B0912 -:1000600087011901556430FFFFFF00130343495313 -:10007000210202001A060527001177021B09A701B9 -:090080001901552330FFFFFF00B8 -:00000001FF -# -# This card is MFC-compliant, but identifies itself as single function -#
firmware/cis/3CCFEM556.ct new file +22 -0
@@ -0,0 +1,22 @@ +# +# This card is MFC-compliant, but identifies itself as single function +# +vers_1 5.0, "3Com", "Megahertz 3CCFEM556", "LAN + 56k Modem" +manfid 0x0101, 0x0556 +funcid 0 + +mfc { + funcid network_adapter + config base 0x1000 mask 0x267 last_index 0x07 + cftable_entry 0x07 + Vcc Vnom 5V + irq mask 0xffff [level] + io 0x0000-0x000f [8bit] [16bit] +}, { + funcid serial_port + config base 0x1100 mask 0x277 last_index 0x27 + cftable_entry 0x27 + Vcc Vnom 5V + irq mask 0xffff [level] + io 0x0000-0x0007 [8bit] +}
firmware/cis/3CXEM556.cis.ihex deleted +0 -13
@@ -1,13 +0,0 @@ -:1000000001030000FF152C050033436F6D004D65A3 -:100010006761686572747A20334358454D353536CB -:10002000004C414E202B2035366B204D6F64656DA2 -:100030000000FF20040101350021020000060B0230 -:10004000004C0000000069000000FF00130343495A -:1000500053210206001A0501070008631B098701E6 -:100060001901556430FFFFFF001303434953210278 -:1000700002001A0501270009631B09A70119015590 -:060080002330FFFFFF002A -:00000001FF -# -# This card is MFC-compliant, but identifies itself as single function -#
firmware/cis/3CXEM556.ct new file +22 -0
@@ -0,0 +1,22 @@ +# +# This card is MFC-compliant, but identifies itself as single function +# +vers_1 5.0, "3Com", "Megahertz 3CXEM556", "LAN + 56k Modem" +manfid 0x0101, 0x0035 +funcid 0 + +mfc { + funcid network_adapter + config base 0x0800 mask 0x63 last_index 0x07 + cftable_entry 0x07 + Vcc Vnom 5V + irq mask 0xffff [level] + io 0x0000-0x000f [8bit] [16bit] +}, { + funcid serial_port + config base 0x900 mask 0x63 last_index 0x27 + cftable_entry 0x27 + Vcc Vnom 5V + irq mask 0xffff [level] + io 0x0000-0x0007 [8bit] +}
firmware/cis/COMpad2.cis.ihex deleted +0 -11
@@ -1,11 +0,0 @@ -:1000000001030000FF151F0401414456414E5445B1 -:10001000434800434F4D7061642D33322F38350013 -:10002000312E300000FF210202011A0501050001F6 -:10003000031B0EC18118AA61E80207E8030730B864 -:100040009E1B08820108AA6030030F1B0883010869 -:10005000AA6040030F1B08840108AA6050030F1B0D -:0D00600008850108AA6060030F1400FF006E -:00000001FF -# -# Replacement CIS for Advantech COMpad-32/85 -#
firmware/cis/COMpad2.ct new file +20 -0
@@ -0,0 +1,20 @@ +# +# Replacement CIS for Advantech COMpad-32/85 +# +dev_info + NULL 0ns, 512b +vers_1 4.1, "ADVANTECH", "COMpad-32/85", "1.0" +funcid serial_port [post] +config base 0x0100 mask 0x0003 last_index 0x05 +cftable_entry 0x01 [default] + [mwait] + io 0x02e8-0x02ef, 0x03e8-0x03ef [lines=10] [8bit] [range] + irq mask 0x9eb8 [level] +cftable_entry 0x02 + io 0x0330-0x033f [lines=10] [8bit] [range] +cftable_entry 0x03 + io 0x0340-0x034f [lines=10] [8bit] [range] +cftable_entry 0x04 + io 0x0350-0x035f [lines=10] [8bit] [range] +cftable_entry 0x05 + io 0x0360-0x036f [lines=10] [8bit] [range]
firmware/cis/COMpad4.cis.ihex deleted +0 -9
@@ -1,9 +0,0 @@ -:1000000001030000FF151F0401414456414E5445B1 -:10001000434800434F4D7061642D33322F383542D1 -:100020002D34000000FF210202011A050102000127 -:10003000011B0BC18118AA6040021F30B89E1B082B -:0C004000820108AA6040031F1400FF00AA -:00000001FF -# -# Replacement CIS for Advantech COMpad-32/85B-4 -#
firmware/cis/COMpad4.ct new file +14 -0
@@ -0,0 +1,14 @@ +# +# Replacement CIS for Advantech COMpad-32/85B-4 +# +dev_info + NULL 0ns, 512b +vers_1 4.1, "ADVANTECH", "COMpad-32/85B-4" +funcid serial_port [post] +config base 0x0100 mask 0x0001 last_index 0x02 +cftable_entry 0x01 [default] + [mwait] + io 0x0240-0x025f [lines=10] [8bit] [range] + irq mask 0x9eb8 [level] +cftable_entry 0x02 + io 0x0340-0x035f [lines=10] [8bit] [range]
firmware/cis/DP83903.cis.ihex deleted +0 -14
@@ -1,14 +0,0 @@ -:1000000001030000FF152904014D756C74696675C4 -:100010006E6374696F6E20436172640000004E531A -:1000200043204D46204C414E2F4D6F64656D00FFBF -:1000300020047501000021020000060B02004900A7 -:100040000000006A000000FF00130343495321022F -:1000500006001A060517201077021B0C970179017C -:10006000556530FFFF284000FF001303434953212B -:100070000202001A060507401077021B09870119C2 -:0800800001552330FFFFFF00D2 -:00000001FF -# -# This CIS is for cards based on the National Semiconductor -# DP83903 Multiple Function Interface Chip -#
firmware/cis/DP83903.ct new file +24 -0
@@ -0,0 +1,24 @@ +# +# This CIS is for cards based on the National Semiconductor +# DP83903 Multiple Function Interface Chip +# +vers_1 4.1, "Multifunction Card", "", "", "NSC MF LAN/Modem" +manfid 0x0175, 0x0000 +funcid 0 + +mfc { + funcid network_adapter + config base 0x1020 mask 0x277 last_index 0x17 + cftable_entry 0x17 + Vcc Vnom 5V + irq mask 0xffff [level] + io 0x0000-0x001f [8bit] [16bit] + memory 0x0000-0x3fff @ 0x0000 +}, { + funcid serial_port + config base 0x1040 mask 0x0277 last_index 0x07 + cftable_entry 0x07 + Vcc Vnom 5V + irq mask 0xffff [level] + io 0x0000-0x0007 [8bit] +}
firmware/cis/E-CARD.ct new file +9 -0
@@ -0,0 +1,9 @@ +# +# Replacement CIS for old, broken Linksys cards +# +vers_1 4.1, "LINKSYS", "E-CARD" +config base 0x0008 mask 0x000b last_index 0x00 +cftable_entry 0x1 [default] + Vcc Vnom 5V + irq mask 0xffff [level] + io 0x0000-0x000f, 0x0010-0x001f [8bit] [16bit]
firmware/cis/LA-PCM.cis.ihex deleted +0 -20
@@ -1,20 +0,0 @@ -:100000000105D4F953E9FF17035338FF20040FC04B -:1000100002002102060315390401416C6C69656414 -:100020002054656C657369732C4B2E4B00457468C6 -:1000300065726E6574204C414E20436172640043CA -:10004000656E747265434F4D004C412D50434D0019 -:10005000FF1A0602100000020B1B08810108E06075 -:1000600000021F1B08820108E06020021F1B08839A -:100070000108E06040021F1B08840108E060600284 -:100080001F1B08850108E06080021F1B088601080D -:10009000E060A0021F1B08870108E060C0021F1B70 -:1000A00008880108E060E0021F1B08890108E06081 -:1000B00000031F1B088A0108E06020031F1B088B38 -:1000C0000108E06040031F1B088C0108E06060032A -:1000D0001F1B088D0108E06080031F1B088E0108AC -:1000E000E060A0031F1B088F0108E060C0031F1B16 -:0D00F00008900108E060E0031F1400FF000D -:00000001FF -# -# Replacement CIS for Allied Telesis LA-PCM -#
firmware/cis/LA-PCM.ct new file +44 -0
44 lines not on this page · raw message
firmware/cis/MT5634ZLX.cis.ihex deleted +0 -11
@@ -1,11 +0,0 @@ -:100000000101FF152204014D756C74695465636824 -:100010000050434D4349412035364B2044617461C3 -:10002000466178000000FF20040002010021020266 -:10003000001A05012780FF671B0FCF418B01550177 -:10004000550155AA60F80307281B08970108AA6004 -:10005000F802071B089F0108AA60E803071B08A70E -:0B0060000108AA60E802071400FF007E -:00000001FF -# -# Replacement CIS for Multitech MT5634ZLX modems -#
firmware/cis/MT5634ZLX.ct new file +18 -0
@@ -0,0 +1,18 @@ +# +# Replacement CIS for Multitech MT5634ZLX modems +# +dev_info no_info +vers_1 4.1, "MultiTech", "PCMCIA 56K DataFax" +manfid 0x0200, 0x0001 +funcid serial_port +config base 0xff80 mask 0x0067 last_index 0x27 +cftable_entry 0x0f [default] + [rdybsy] [audio] [pwrdown] + Vcc Vnom 5V Vpp1 Vnom 5V Vpp2 Vnom 5V + io 0x03f8-0x03ff [lines=10] [8bit] +cftable_entry 0x17 + io 0x02f8-0x02ff [lines=10] [8bit] +cftable_entry 0x1f + io 0x03e8-0x03ef [lines=10] [8bit] +cftable_entry 0x27 + io 0x02e8-0x02ef [lines=10] [8bit]
firmware/cis/NE2K.cis.ihex deleted +0 -8
@@ -1,8 +0,0 @@ -:1000000001030000FF1515040150434D4349410011 -:1000100045746865726E6574000000FF2102060079 -:100020001A050120F803031B09E001190155653089 -:06003000FFFF1400FF00B9 -:00000001FF -# -# Replacement CIS for various busted NE2000-compatible cards -#
firmware/cis/NE2K.ct new file +10 -0
@@ -0,0 +1,10 @@ +# +# Replacement CIS for various busted NE2000-compatible cards +# +vers_1 4.1, "PCMCIA", "Ethernet" +funcid network_adapter +config base 0x03f8 mask 0x03 last_index 0x20 +cftable_entry 0x20 [default] + Vcc Vnom 5V + irq mask 0xffff [level] + io 0x0000-0x001f [8bit] [16bit]
firmware/cis/PCMLM28.cis.ihex deleted +0 -18
@@ -1,18 +0,0 @@ -:1000000001030000FF151504014C494E4B53595391 -:100010000050434D4C4D3238000000FF2004430196 -:10002000ABC0210200001A05012FF803031B10E4E6 -:1000300001190155E06100031FF8020730FFFF1BA3 -:100040000BA50108E06120031FF802071B0BA601A6 -:1000500008E06140031FF802071B0BA70108E061DD -:1000600060031FF802071B0BA80108E06100031FD3 -:10007000E803071B0BA90108E06120031FE8030741 -:100080001B0BAA0108E06140031FE803071B0BAB31 -:100090000108E06160031FE803071B0BAC0108E0E7 -:1000A0006100031FE802071B0BAD0108E06120039C -:1000B0001FE802071B0BAE0108E06140031FE802C6 -:1000C000071B0BAF0108E06160031FE80207140083 -:0200D000FF002F -:00000001FF -# -# The on-card CIS says it is MFC-compliant, but it is not -#
firmware/cis/PCMLM28.ct new file +37 -0
@@ -0,0 +1,37 @@ +# +# The on-card CIS says it is MFC-compliant, but it is not +# +vers_1 4.1, "LINKSYS", "PCMLM28" +manfid 0x0143, 0xc0ab +funcid 0 +config base 0x03f8 mask 0x03 last_index 0x2f + +cftable_entry 0x24 [default] + Vcc Vnom 5V + irq mask 0xffff [level] + io 0x0300-0x031f, 0x02f8-0x02ff [8bit] [16bit] + +cftable_entry 0x25 + io 0x0320-0x033f, 0x02f8-0x02ff [8bit] [16bit] +cftable_entry 0x26 + io 0x0340-0x035f, 0x02f8-0x02ff [8bit] [16bit] +cftable_entry 0x27 + io 0x0360-0x037f, 0x02f8-0x02ff [8bit] [16bit] + +cftable_entry 0x28 + io 0x0300-0x031f, 0x03e8-0x03ef [8bit] [16bit] +cftable_entry 0x29 + io 0x0320-0x033f, 0x03e8-0x03ef [8bit] [16bit] +cftable_entry 0x2a + io 0x0340-0x035f, 0x03e8-0x03ef [8bit] [16bit] +cftable_entry 0x2b + io 0x0360-0x037f, 0x03e8-0x03ef [8bit] [16bit] + +cftable_entry 0x2c + io 0x0300-0x031f, 0x02e8-0x02ef [8bit] [16bit] +cftable_entry 0x2d + io 0x0320-0x033f, 0x02e8-0x02ef [8bit] [16bit] +cftable_entry 0x2e + io 0x0340-0x035f, 0x02e8-0x02ef [8bit] [16bit] +cftable_entry 0x2f + io 0x0360-0x037f, 0x02e8-0x02ef [8bit] [16bit]
firmware/cis/PE-200.cis.ihex deleted +0 -9
@@ -1,9 +0,0 @@ -:1000000001030000FF151E0401504D582020200060 -:1000100050452D3230300045544845524E4554002D -:1000200052303100FF210206031A050101000101CF -:100030001B0EC181190155E051000F100F30FFFF59 -:040040001400FF00A9 -:00000001FF -# -# Replacement CIS for PE-200 ethernet card -#
firmware/cis/PE-200.ct new file +11 -0
@@ -0,0 +1,11 @@ +# +# Replacement CIS for PE-200 ethernet card +# +vers_1 4.1, "PMX ", "PE-200", "ETHERNET", "R01" +funcid network_adapter [post] [rom] +config base 0x0100 mask 0x0001 last_index 0x01 +cftable_entry 0x1 [default] + [mwait] + Vcc Vnom 5V + irq mask 0xffff [level] + io 0x0000-0x000f, 0x0010-0x001f [8bit] [16bit]
firmware/cis/PE520.cis.ihex deleted +0 -9
@@ -1,9 +0,0 @@ -:1000000001030000FF152304014B544900504535FE -:10001000323020504C55530050434D434941204508 -:10002000746865726E65740000FF20046101100041 -:10003000210206001A050101D00F0B1B09C101198D -:0A00400001556530FFFF1400FF00BA -:00000001FF -# -# Replacement CIS for PE520 ethernet card -#
firmware/cis/PE520.ct new file +11 -0
@@ -0,0 +1,11 @@ +# +# Replacement CIS for LanPro EP-4000A ethernet card +# +vers_1 4.1, "KTI", "PE520 PLUS", "PCMCIA Ethernet" +manfid 0x0161, 0x0010 +funcid network_adapter +config base 0x0fd0 mask 0x0b last_index 0x01 +cftable_entry 0x01 [default] + Vcc Vnom 5V + irq mask 0xffff [level] + io 0x0000-0x001f [8bit] [16bit]
firmware/cis/RS-COM-2P.cis.ihex deleted +0 -10
@@ -1,10 +0,0 @@ -:1000000001030000FF1516040150434D4349410010 -:1000100052532D434F4D203250000000FF21020269 -:10002000011A0501030001011B0EC18118AA61E834 -:100030000307E8020730B89E1B0B820108AA615033 -:1000400002075802071B0B830108AA6160020768B8 -:0600500002071400FF008E -:00000001FF -# -# Replacement CIS for dual-serial-port IO card -#
firmware/cis/RS-COM-2P.ct new file +14 -0
@@ -0,0 +1,14 @@ +# +# Replacement CIS for dual-serial-port IO card +# +vers_1 4.1, "PCMCIA", "RS-COM 2P" +funcid serial_port [post] +config base 0x0100 mask 0x0001 last_index 0x03 +cftable_entry 0x01 [default] + [mwait] + io 0x03e8-0x03ef, 0x02e8-0x02ef [lines=10] [8bit] [range] + irq mask 0x9eb8 [level] +cftable_entry 0x02 + io 0x0250-0x0257, 0x0258-0x025f [lines=10] [8bit] [range] +cftable_entry 0x03 + io 0x0260-0x0267, 0x0268-0x026f [lines=10] [8bit] [range]
firmware/cis/SW_555_SER.cis.ihex deleted +0 -12
@@ -1,12 +0,0 @@ -:100000000101FF17034100FF20043F0110072102F7 -:100010000200152A070053696572726120576972E0 -:10002000656C657373004169724361726420353594 -:1000300035004135353500526576203100FF1A050F -:1000400001030007731B0BE00118A360F8030730DE -:10005000BC3F1B08A10108A360F802071B08A2010E -:1000600008A360E803071B08A30108A360E80207D0 -:0A0070001B04A40108231400FF0084 -:00000001FF -# -# Replacement CIS for AC555 provided by Sierra Wireless -#
firmware/cis/SW_555_SER.ct new file +19 -0
@@ -0,0 +1,19 @@ +dev_info + no_info +attr_dev_info + EEPROM 250ns, 512b +manfid 0x013f, 0x0710 +funcid serial_port +vers_1 7.0, "Sierra Wireless", "AirCard 555", "A555", "Rev 1" +config base 0x0700 mask 0x0073 last_index 0x03 +cftable_entry 0x20 [default] + io 0x03f8-0x03ff [lines=3] [8bit] [range] + irq mask 0x3fbc [level] +cftable_entry 0x21 + io 0x02f8-0x02ff [lines=3] [8bit] [range] +cftable_entry 0x22 + io 0x03e8-0x03ef [lines=3] [8bit] [range] +cftable_entry 0x23 + io 0x02e8-0x02ef [lines=3] [8bit] [range] +cftable_entry 0x24 + io 0x0000-0x0007 [lines=3] [8bit]
firmware/cis/SW_7xx_SER.cis.ihex deleted +0 -13
@@ -1,13 +0,0 @@ -:100000000101FF17034100FF2004920110072102A4 -:1000100002001537070053696572726120576972D3 -:10002000656C6573730041433731302F4143373579 -:10003000300047505253204E6574776F726B2041E9 -:1000400064617074657200523100FF1A050103008B -:1000500007731B10E00119784D555D25A360F80367 -:100060000730BC861B08A10108A360F802071B0823 -:10007000A20108A360E803071B08A30108A360E826 -:0C00800002071B04A40108231400FF0069 -:00000001FF -# -# Replacement CIS for AC7xx provided by Sierra Wireless -#
firmware/cis/SW_7xx_SER.ct new file +21 -0
@@ -0,0 +1,21 @@ +dev_info + no_info +attr_dev_info + EEPROM 250ns, 512b +manfid 0x0192, 0x0710 +funcid serial_port +vers_1 7.0, "Sierra Wireless", "AC710/AC750", "GPRS Network Adapter", + "R1" +config base 0x0700 mask 0x0073 last_index 0x03 +cftable_entry 0x20 [default] + Vcc Istatic 45mA Iavg 50mA Ipeak 55mA Idown 20mA + io 0x03f8-0x03ff [lines=3] [8bit] [range] + irq mask 0x86bc [level] +cftable_entry 0x21 + io 0x02f8-0x02ff [lines=3] [8bit] [range] +cftable_entry 0x22 + io 0x03e8-0x03ef [lines=3] [8bit] [range] +cftable_entry 0x23 + io 0x02e8-0x02ef [lines=3] [8bit] [range] +cftable_entry 0x24 + io 0x0000-0x0007 [lines=3] [8bit]
firmware/cis/SW_8xx_SER.cis.ihex deleted +0 -13
@@ -1,13 +0,0 @@ -:100000000101FF17034100FF2004920110072102A4 -:100010000200152F070053696572726120576972DB -:10002000656C657373004143383530003347204EAB -:100030006574776F726B20416461707465720052F1 -:100040003100FF1A0501030007731B10E001197846 -:100050004D555D25A360F8480730BC861B08A101FB -:1000600008A360F847071B08A20108A360E8480737 -:100070001B08A30108A360E847071B04A401082389 -:040080001400FF0069 -:00000001FF -# -# Replacement CIS for AC8xx provided by Sierra Wireless -#
firmware/cis/SW_8xx_SER.ct new file +20 -0
@@ -0,0 +1,20 @@ +dev_info + no_info +attr_dev_info + EEPROM 250ns, 512b +manfid 0x0192, 0x0710 +funcid serial_port +vers_1 7.0, "Sierra Wireless", "AC850", "3G Network Adapter", "R1" +config base 0x0700 mask 0x0073 last_index 0x03 +cftable_entry 0x20 [default] + Vcc Istatic 45mA Iavg 50mA Ipeak 55mA Idown 20mA + io 0x48f8-0x48ff [lines=3] [8bit] [range] + irq mask 0x86bc [level] +cftable_entry 0x21 + io 0x47f8-0x47ff [lines=3] [8bit] [range] +cftable_entry 0x22 + io 0x48e8-0x48ef [lines=3] [8bit] [range] +cftable_entry 0x23 + io 0x47e8-0x47ef [lines=3] [8bit] [range] +cftable_entry 0x24 + io 0x0000-0x0007 [lines=3] [8bit]
firmware/cis/tamarack.cis.ihex deleted +0 -10
@@ -1,10 +0,0 @@ -:100000000103D400FF17034100FF152404015441EC -:100010004D415241434B0045746865726E657400F2 -:10002000410030303437343331313830303100FF33 -:10003000210206001A050120F803031B14E08119B0 -:100040003F554D5D06864626E551000F100F30FFE7 -:05005000FF1400FF0099 -:00000001FF -# -# Replacement CIS for Surecom, Tamarack NE2000 cards -#
firmware/cis/tamarack.ct new file +17 -0
@@ -0,0 +1,17 @@ +# +# Replacement CIS for Surecom, Tamarack NE2000 cards +# +dev_info + fn_specific 100ns, 512b +attr_dev_info + EEPROM 250ns, 512b +vers_1 4.1, "TAMARACK", "Ethernet", "A", "004743118001" +funcid network_adapter +config base 0x03f8 mask 0x0003 last_index 0x20 +cftable_entry 0x20 [default] + [mwait] + Vcc Vnom 5V Vmin 4500mV Vmax 5500mV Istatic 100mA + Iavg 170mA Ipeak 200mA + timing wait 15us + io 0x0000-0x000f, 0x0010-0x001f [lines=5] [8bit] [16bit] + irq mask 0xffff [level]
Signature · 1 line
1.5.6.5
Re: [PATCH 2/5] Add mkcis - a program that can create .cis from text description
In reply to Dmitry Eremin-SolenikovQuoted 5 lines · Dmitry Eremin-Solenikov
For CIS files (describing hardware on PCMCIA and some other busses) binary file isn't the 'preferred for for modification' in most cases. pcmcia-cs project have developed
pack_cisprogram which can be used (and was used most probably) to generate .cis files from simple text descriptions. Import this code to the kernel under the name of mkcis.
This is useful, thanks -- but NACK. The firmware/ directory of the kernel will hopefully die soon, and is no longer what's actually shipped by many distributions.
We should be concentrating on the linux-firmware.git repository instead.
Signature · 2 lines
David Woodhouse Open Source Technology Centre [email protected] Intel Corporation
Re: [PATCH 2/5] Add mkcis - a program that can create .cis from text description
Quoted 7 lines · David Woodhouse
Quoted 5 lines · Dmitry Eremin-Solenikov
For CIS files (describing hardware on PCMCIA and some other busses) binary file isn't the 'preferred for for modification' in most cases. pcmcia-cs project have developed
pack_cisprogram which can be used (and was used most probably) to generate .cis files from simple text descriptions. Import this code to the kernel under the name of mkcis.
Quoted 5 lines
This is useful, thanks -- but NACK. The
firmware/directory of the kernel will hopefully die soon, and is no longer what's actually shipped by many distributions.We should be concentrating on the linux-firmware.git repository instead.
Should I redo this patch serie against linux-firmware.git (probably with just putting .ct files near .cis)?
Quoted 6 lines
--
David Woodhouse Open Source Technology Centre [email protected] Intel Corporation
Signature · 2 lines
With best wishes Dmitry
Quoted 1 line · Dmitry Eremin-Solenikov
Include Makefile.lib into Makefile.fwinst to enable
_shippedprocessing.
The mess in Makefile.lib is better not exposed too much.
I suggest to move the _shipped processing to Kbuild.include.
Sam
Re: [PATCH 2/5] Add mkcis - a program that can create .cis from text description
In reply to Dmitry Eremin-SolenikovQuoted 2 lines · Dmitry Eremin-Solenikov
Should I redo this patch serie against linux-firmware.git (probably with just putting .ct files near .cis)?
Yes please.
Signature · 1 line
dwmw2
Re: [PATCH 2/5] Add mkcis - a program that can create .cis from text description
In reply to David WoodhouseQuoted 7 lines · David Woodhouse
Quoted 5 lines · Dmitry Eremin-Solenikov
For CIS files (describing hardware on PCMCIA and some other busses) binary file isn't the 'preferred for for modification' in most cases. pcmcia-cs project have developed
pack_cisprogram which can be used (and was used most probably) to generate .cis files from simple text descriptions. Import this code to the kernel under the name of mkcis.
Quoted 5 lines
This is useful, thanks -- but NACK. The
firmware/directory of the kernel will hopefully die soon, and is no longer what's actually shipped by many distributions.We should be concentrating on the linux-firmware.git repository instead.
Unfortunately, a perusal of that git repo fails to find the amd-microcode tree, which contains a .bin file that brings my early 4 core phenom up to revision 65.
I picked that up and have been carrying it forward from a message's link from this list about 2 years ago, and have been carrying it locally since. However, I have not seen it mentioned as being used in a dmesg parse since 2.6.35-early-rc.
Is there a good reason for this late apparent lack of using this resource?
Thanks.
Signature · 6 lines
Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If Microsoft built cars, If you were involved in a crash, you would have no idea what happened.
Re: [PATCH 2/5] Add mkcis - a program that can create .cis from text description
In reply to Dmitry Eremin-SolenikovQuoted 4 lines
Quoted 1 line
We should be concentrating on the linux-firmware.git repository instead.
Should I redo this patch serie against linux-firmware.git (probably with just putting .ct files near .cis)?
\o/ That was on my todo-list for "somewhen", too. Thanks!
Signature · 2 lines
Pengutronix e.K. | Wolfram Sang | Industrial Linux Solutions | http://www.pengutronix.de/ |