Skip to contentSkip to conversation

edac: i7300_edac: call pci_disable_device

PATCH In review Vasiliy Kulikov 2 participants 2 messages Sep 28, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 edac: i7300_edac: call pci_disable_device

i7300_init_one() should call pci_disable_device() on error. i7300_remove_one() should call pci_disable_device() as i7300_init_one() calls pci_enable_device().
Also pci_enable_device() might return any error, not only -EIO, so check for nonzero return code instead of checking equation to -EIO.

---
Compile tested.

 drivers/edac/i7300_edac.c |   35 +++++++++++++++++++++--------------
 1 files changed, 21 insertions(+), 14 deletions(-)
drivers/edac/i7300_edac.c +21 -14
index 38920c0..749fa75 100644
@@ -1046,7 +1046,7 @@ static int __devinit i7300_init_one(struct pci_dev *pdev,
 
 	/* wake up device */
 	rc = pci_enable_device(pdev);
-	if (rc = -EIO)
+	if (rc)
 		return rc;
 
 	debugf0("MC: " __FILE__ ": %s(), pdev bus %u dev=0x%x fn=0x%x\n",
@@ -1055,8 +1055,9 @@ static int __devinit i7300_init_one(struct pci_dev *pdev,
 		PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
 
 	/* We only are looking for func 0 of the set */
+	rc = -ENODEV;
 	if (PCI_FUNC(pdev->devfn) != 0)
-		return -ENODEV;
+		goto fail_disable;
 
 	/* As we don't have a motherboard identification routine to determine
 	 * actual number of slots/dimms per channel, we thus utilize the
@@ -1073,10 +1074,10 @@ static int __devinit i7300_init_one(struct pci_dev *pdev,
 		__func__, num_channels, num_dimms_per_channel, num_csrows);
 
 	/* allocate a new MC control structure */
+	rc = -ENOMEM;
 	mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels, 0);
-
 	if (mci = NULL)
-		return -ENOMEM;
+		goto fail_disable;
 
 	debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
 
@@ -1085,15 +1086,15 @@ static int __devinit i7300_init_one(struct pci_dev *pdev,
 	pvt = mci->pvt_info;
 	pvt->pci_dev_16_0_fsb_ctlr = pdev;	/* Record this device in our private */
 
+	rc = -ENOMEM;
 	pvt->tmp_prt_buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	if (!pvt->tmp_prt_buffer) {
-		edac_mc_free(mci);
-		return -ENOMEM;
-	}
+	if (!pvt->tmp_prt_buffer)
+		goto fail_free;
 
 	/* 'get' the pci devices we want to reserve for our use */
+	rc = -ENODEV;
 	if (i7300_get_devices(mci))
-		goto fail0;
+		goto fail_buffer_free;
 
 	mci->mc_idx = 0;
 	mci->mtype_cap = MEM_FLAG_FB_DDR2;
@@ -1121,13 +1122,14 @@ static int __devinit i7300_init_one(struct pci_dev *pdev,
 	}
 
 	/* add this new MC control structure to EDAC's list of MCs */
+	rc = -ENODEV;
 	if (edac_mc_add_mc(mci)) {
 		debugf0("MC: " __FILE__
 			": %s(): failed edac_mc_add_mc()\n", __func__);
 		/* FIXME: perhaps some code should go here that disables error
 		 * reporting if we just enabled it
 		 */
-		goto fail1;
+		goto fail_put;
 	}
 
 	i7300_clear_error(mci);
@@ -1146,14 +1148,18 @@ static int __devinit i7300_init_one(struct pci_dev *pdev,
 	return 0;
 
 	/* Error exit unwinding stack */
-fail1:
-
+fail_put:
 	i7300_put_devices(mci);
 
-fail0:
+fail_buffer_free:
 	kfree(pvt->tmp_prt_buffer);
+
+fail_free:
 	edac_mc_free(mci);
-	return -ENODEV;
+
+fail_disable:
+	pci_disable_device(pdev);
+	return rc;
 }
 
 /**
@@ -1181,6 +1187,7 @@ static void __devexit i7300_remove_one(struct pci_dev *pdev)
 
 	kfree(tmp);
 	edac_mc_free(mci);
+	pci_disable_device(pdev);
 }
 
 /*
Signature · 1 line
1.7.0.4
#1 lore raw

Em 28-09-2010 14:49, Vasiliy Kulikov escreveu:

Quoted 5 lines

i7300_init_one() should call pci_disable_device() on error. i7300_remove_one() should call pci_disable_device() as i7300_init_one() calls pci_enable_device().
Also pci_enable_device() might return any error, not only -EIO, so check for nonzero return code instead of checking equation to -EIO.

hmm... not sure if this is a good idea. A lspci (before applying i7300 edac drivers) pointed to another driver for i7300, handling other things. A grep i7300 revels a few drivers with i7300 string on it.

So, before disabling the device, we need to be sure that this won't hurt the other drivers.

Quoted 112 lines

---
Compile tested.

 drivers/edac/i7300_edac.c |   35 +++++++++++++++++++++--------------
 1 files changed, 21 insertions(+), 14 deletions(-)
drivers/edac/i7300_edac.c +21 -14
index 38920c0..749fa75 100644
@@ -1046,7 +1046,7 @@ static int __devinit i7300_init_one(struct pci_dev *pdev,
 
 	/* wake up device */
 	rc = pci_enable_device(pdev);
-	if (rc = -EIO)
+	if (rc)
 		return rc;
 
 	debugf0("MC: " __FILE__ ": %s(), pdev bus %u dev=0x%x fn=0x%x\n",
@@ -1055,8 +1055,9 @@ static int __devinit i7300_init_one(struct pci_dev *pdev,
 		PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
 
 	/* We only are looking for func 0 of the set */
+	rc = -ENODEV;
 	if (PCI_FUNC(pdev->devfn) != 0)
-		return -ENODEV;
+		goto fail_disable;
 
 	/* As we don't have a motherboard identification routine to determine
 	 * actual number of slots/dimms per channel, we thus utilize the
@@ -1073,10 +1074,10 @@ static int __devinit i7300_init_one(struct pci_dev *pdev,
 		__func__, num_channels, num_dimms_per_channel, num_csrows);
 
 	/* allocate a new MC control structure */
+	rc = -ENOMEM;
 	mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels, 0);
-
 	if (mci = NULL)
-		return -ENOMEM;
+		goto fail_disable;
 
 	debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
 
@@ -1085,15 +1086,15 @@ static int __devinit i7300_init_one(struct pci_dev *pdev,
 	pvt = mci->pvt_info;
 	pvt->pci_dev_16_0_fsb_ctlr = pdev;	/* Record this device in our private */
 
+	rc = -ENOMEM;
 	pvt->tmp_prt_buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	if (!pvt->tmp_prt_buffer) {
-		edac_mc_free(mci);
-		return -ENOMEM;
-	}
+	if (!pvt->tmp_prt_buffer)
+		goto fail_free;
 
 	/* 'get' the pci devices we want to reserve for our use */
+	rc = -ENODEV;
 	if (i7300_get_devices(mci))
-		goto fail0;
+		goto fail_buffer_free;
 
 	mci->mc_idx = 0;
 	mci->mtype_cap = MEM_FLAG_FB_DDR2;
@@ -1121,13 +1122,14 @@ static int __devinit i7300_init_one(struct pci_dev *pdev,
 	}
 
 	/* add this new MC control structure to EDAC's list of MCs */
+	rc = -ENODEV;
 	if (edac_mc_add_mc(mci)) {
 		debugf0("MC: " __FILE__
 			": %s(): failed edac_mc_add_mc()\n", __func__);
 		/* FIXME: perhaps some code should go here that disables error
 		 * reporting if we just enabled it
 		 */
-		goto fail1;
+		goto fail_put;
 	}
 
 	i7300_clear_error(mci);
@@ -1146,14 +1148,18 @@ static int __devinit i7300_init_one(struct pci_dev *pdev,
 	return 0;
 
 	/* Error exit unwinding stack */
-fail1:
-
+fail_put:
 	i7300_put_devices(mci);
 
-fail0:
+fail_buffer_free:
 	kfree(pvt->tmp_prt_buffer);
+
+fail_free:
 	edac_mc_free(mci);
-	return -ENODEV;
+
+fail_disable:
+	pci_disable_device(pdev);
+	return rc;
 }
 
 /**
@@ -1181,6 +1187,7 @@ static void __devexit i7300_remove_one(struct pci_dev *pdev)
 
 	kfree(tmp);
 	edac_mc_free(mci);
+	pci_disable_device(pdev);
 }
 
 /*