Skip to contentSkip to conversation

ARMV7: OMAP4: Implement relocation for Panda and OMAP4430SDP

U-Boot Steve Sakoman 1 participant 1 message Oct 8, 2010 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

This patch fixes the build breakage introduced by the recent relocation changes for ARMV7

---

arch/arm/cpu/armv7/omap4/board.c +5 -0
index 8c1f395..24a66f5 100644
@@ -102,8 +102,13 @@ int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	gd->bd->bi_dram[0].start = 0x80000000;
 	gd->bd->bi_dram[0].size = sdram_size();
+#else
+	gd->ram_size = sdram_size();
+#endif
+
 	return 0;
 }
 
board/ti/panda/config.mk +1 -3
index 7382263..7176c14 100644
@@ -27,6 +27,4 @@
 # 8000'0000 - 9fff'ffff (512 MB)
 # Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
 # (mem base + reserved)
-
-# Let's place u-boot 1MB before the end of SDRAM.
-TEXT_BASE = 0x9ff00000
+TEXT_BASE = 0x80e80000
board/ti/sdp4430/config.mk +1 -2
index 7382263..7bb9473 100644
@@ -28,5 +28,4 @@
 # Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
 # (mem base + reserved)
 
-# Let's place u-boot 1MB before the end of SDRAM.
-TEXT_BASE = 0x9ff00000
+TEXT_BASE = 0x80e80000
include/configs/omap4_panda.h +3 -6
index 2618f7d..b52ca19 100644
@@ -139,12 +139,6 @@
 #undef CONFIG_CMD_IMLS		/* List all found images        */
 
 /*
- * Enabling relocation of u-boot by default
- * Relocation can be skipped if u-boot is copied to the TEXT_BASE
- */
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-
-/*
  * Environment setup
  */
 
@@ -233,4 +227,7 @@
  */
 #define CONFIG_NR_DRAM_BANKS	1
 
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+#define CONFIG_SYS_INIT_SP_ADDR		(LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */
include/configs/omap4_sdp4430.h +3 -6
index 8274577..174d73f 100644
@@ -144,12 +144,6 @@
 #undef CONFIG_CMD_IMLS		/* List all found images        */
 
 /*
- * Enabling relocation of u-boot by default
- * Relocation can be skipped if u-boot is copied to the TEXT_BASE
- */
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-
-/*
  * Environment setup
  */
 
@@ -238,4 +232,7 @@
  */
 #define CONFIG_NR_DRAM_BANKS	1
 
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+#define CONFIG_SYS_INIT_SP_ADDR		(LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */