Skip to contentSkip to conversation

Can't mount LV on fakeraid mirror

linux-lvm Mike Reed 2 participants 2 messages Oct 11, 2010

lore
Share & tools
lore

Mike Reed

author
#0 lore raw

Hi,
I was using a fakeraid mirror with LVM for backups (don't ask) and after an upgrade from ubuntu 8.10 to ubuntu 9.04, the switch to grub2 broke my system.
Before doing anything I wanted to check I could still see my backups on the mirror.
I'm using Ubuntu 10.04 Live CD. I boot up and:

# sudo su
# apt-get install lvm2
...

So far so good. Then

# lvdisplay
--- Logical volume ---
LV Name /dev/VolGroup01/LogVol02
VG Name VolGroup01
LV UUID tyP51S-EMOO-UCfE-4MSy-TA9f-xaJh-SMMnk9
LV Write Access read/write
LV Status NOT available
LV Size 465.76 GiB
Current LE 119234
Segments 1
Allocation inherit
Read ahead sectors auto

Hmmm... it says "NOT available" and indeed, I can't mount it.

# mkdir home
# mount /dev/VolGroup01/LogVol02 home
mount: special device /dev/VolGroup01/LogVol02 does not exist

I checked the raid sets:

# dmraid -s pdc_bbbad
/dev/sdb: "sil" and "pdc" formats discovered (using pdc)!
/dev/sdc: "sil" and "pdc" formats discovered (using pdc)!
*** Active Set
name : pdc_bbbad
size : 976562432
stride : 128
type : mirror
status : ok
subsets: 0
devs : 2
spares : 0

It says "ok". I also check through dmsetup:

# dmsetup info pdc_bbbad
Name: pdc_bbbad
State: ACTIVE
Read Ahead: 256
Tables present: LIVE
Open count: 0
Event number: 1
Major, minor: 252, 0
Number of targets: 1
UUID: DMRAID-pdc_bbbad

It says "ACTIVE" and the tables present are "LIVE". Why is my logical volume not available?

I then tried:

# partprobe
Error: Can't have a partition outside the disk!
Warning: Unable to open /dev/sr0 read-write (Read-only file
system). /dev/sr0 has been opened read-only.

Now that first error I'd seen a while back even when I could mount the LV. Now:

# lvdisplay
--- Logical volume ---
LV Name /dev/VolGroup01/LogVol02
VG Name VolGroup01
LV UUID tyP51S-EMOO-UCfE-4MSy-TA9f-xaJh-SMMnk9
LV Write Access read/write
LV Status suspended
# open 0
LV Size 465.76 GiB
Current LE 119234
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 252:4

Status is "suspended". Hmmm, looks slightly more hopefule, but:

# lvm lvchange -ay /dev/VolGroup01/LogVol02
device-mapper: resume ioctl failed: Invalid argument
Unable to resume VolGroup01-LogVol02 (252:4)

Before I tried to mount my LV with the backups I knew little about LV (I remember using some graphical tool to set it up years ago and hadn't touched it since), and new nothing about dmraid or dmsetup so now I'm stuck.
Really want to check my backup mirror LV before doing anything else so would really appreciate if someone can give me some pointers as to what to do next.

Thanks,
Mike.

#1 lore raw

I wonder what pvdisplay and vgchnage -ay would
say, but before doing anything else I'd make another backup of the files iif possible, or make an image of at least one of the drives. It looks like something may have changed with the RAID, such as storing the metadata at the end versus the beginning, but before messing with anything that could possibly make any chnages on the disks make a straight dd image, as any changes you make could bad.
--
Ray Morris
[email protected]

Strongbox - The next generation in site security:
http://www.bettercgi.com/strongbox/

Throttlebox - Intelligent Bandwidth Control
http://www.bettercgi.com/throttlebox/

Strongbox / Throttlebox affiliate program:
http://www.bettercgi.com/affiliates/user/register.php

Quoted 114 lines · Mike Reed

Hi,
I was using a fakeraid mirror with LVM for backups (don't ask) and after an upgrade from ubuntu 8.10 to ubuntu 9.04, the switch to grub2 broke my system.
Before doing anything I wanted to check I could still see my backups on the mirror.
I'm using Ubuntu 10.04 Live CD. I boot up and:

# sudo su
# apt-get install lvm2
...

So far so good. Then

# lvdisplay
--- Logical volume ---
LV Name /dev/VolGroup01/LogVol02
VG Name VolGroup01
LV UUID tyP51S-EMOO-UCfE-4MSy-TA9f-xaJh-SMMnk9
LV Write Access read/write
LV Status NOT available
LV Size 465.76 GiB
Current LE 119234
Segments 1
Allocation inherit
Read ahead sectors auto

Hmmm... it says "NOT available" and indeed, I can't mount it.

# mkdir home
# mount /dev/VolGroup01/LogVol02 home
mount: special device /dev/VolGroup01/LogVol02 does not exist

I checked the raid sets:

# dmraid -s pdc_bbbad
/dev/sdb: "sil" and "pdc" formats discovered (using pdc)!
/dev/sdc: "sil" and "pdc" formats discovered (using pdc)!
*** Active Set
name : pdc_bbbad
size : 976562432
stride : 128
type : mirror
status : ok
subsets: 0
devs : 2
spares : 0

It says "ok". I also check through dmsetup:

# dmsetup info pdc_bbbad
Name: pdc_bbbad
State: ACTIVE
Read Ahead: 256
Tables present: LIVE
Open count: 0
Event number: 1
Major, minor: 252, 0
Number of targets: 1
UUID: DMRAID-pdc_bbbad

It says "ACTIVE" and the tables present are "LIVE". Why is my logical volume not available?

I then tried:

# partprobe
Error: Can't have a partition outside the disk!
Warning: Unable to open /dev/sr0 read-write (Read-only file
system). /dev/sr0 has been opened read-only.

Now that first error I'd seen a while back even when I could mount the LV. Now:

# lvdisplay
--- Logical volume ---
LV Name /dev/VolGroup01/LogVol02
VG Name VolGroup01
LV UUID tyP51S-EMOO-UCfE-4MSy-TA9f-xaJh-SMMnk9
LV Write Access read/write
LV Status suspended
# open 0
LV Size 465.76 GiB
Current LE 119234
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 252:4

Status is "suspended". Hmmm, looks slightly more hopefule, but:

# lvm lvchange -ay /dev/VolGroup01/LogVol02
device-mapper: resume ioctl failed: Invalid argument
Unable to resume VolGroup01-LogVol02 (252:4)

Before I tried to mount my LV with the backups I knew little about LV (I remember using some graphical tool to set it up years ago and hadn't touched it since), and new nothing about dmraid or dmsetup so now I'm stuck.
Really want to check my backup mirror LV before doing anything else so would really appreciate if someone can give me some pointers as to what to do next.

Thanks,
Mike.

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/