Skip to contentSkip to conversation

Call for help for demo UPNP media renderer

DISCUSSION Joshua Lock 6 participants 19 messages Oct 19, 2010 – Oct 20, 2010

lore
Share & tools
lore
#0 lore raw

Hi all,

I've packaged Rygel, a upnp media server and renderer, to use as the media renderer in the upnp demo. However I'm seeing a segfault at launch and as it's getting late here I'm wondering if someone in a strategic timezone can help debug while I cycle home and sleep.

The (ugly) recipes are in the josh/demo branch of the meta-demo repository.

rygel --gst-debug-level=5

shows plenty of output, but nothing that jumps out to a gstreamer newb like me. AFAICT I have all of the plugins required but it's possible we need to add more.

If not I'll pick it up again in the morning.

Thanks,
Joshua

Signature · 2 lines
Joshua Lock
        Intel Open Source Technology Centre
#1 lore raw

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

Thanks
Sau!

Quoted 20 lines · Joshua Lock

Hi all,

I've packaged Rygel, a upnp media server and renderer, to use as the media renderer in the upnp demo. However I'm seeing a segfault at launch and as it's getting late here I'm wondering if someone in a strategic timezone can help debug while I cycle home and sleep.

The (ugly) recipes are in the josh/demo branch of the meta-demo repository.

rygel --gst-debug-level=5

shows plenty of output, but nothing that jumps out to a gstreamer newb like me. AFAICT I have all of the plugins required but it's possible we need to add more.

If not I'll pick it up again in the morning.

Thanks,
Joshua

#2 lore raw

It seems I didn't push all of my changes, just trying to replicate them here and push.

Joshua

Quoted 35 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

Thanks
Sau!

Quoted 12 lines · Joshua Lock

Hi all,

I've packaged Rygel, a upnp media server and renderer, to use as the media renderer in the upnp demo. However I'm seeing a segfault at launch and as it's getting late here I'm wondering if someone in a strategic timezone can help debug while I cycle home and sleep.

The (ugly) recipes are in the josh/demo branch of the meta-demo repository.

rygel --gst-debug-level=5

Quoted 8 lines

shows plenty of output, but nothing that jumps out to a gstreamer newb like me. AFAICT I have all of the plugins required but it's possible we need to add more.

If not I'll pick it up again in the morning.

Thanks,
Joshua

_______________________________________________
yocto mailing list
[email protected]
https://lists.pokylinux.org/listinfo/yocto

Signature · 2 lines
Joshua Lock
        Intel Open Source Technology Centre
#3 lore raw

so Josh, have you pushed all of your changes now? That way Dongxiao can follow up with it here.

Thanks
Kevin

Quoted 53 lines

From: Joshua Lock
Sent: Wednesday, October 20, 2010 6:37 AM

It seems I didn't push all of my changes, just trying to replicate them here and push.

Joshua

Quoted 28 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

Thanks
Sau!

Quoted 18 lines · Joshua Lock

Hi all,

I've packaged Rygel, a upnp media server and renderer, to use as the media renderer in the upnp demo. However I'm seeing a segfault at launch and as it's getting late here I'm wondering if someone in a strategic timezone can help debug while I cycle home and sleep.

The (ugly) recipes are in the josh/demo branch of the meta-demo repository.

rygel --gst-debug-level=5

shows plenty of output, but nothing that jumps out to a gstreamer newb like me. AFAICT I have all of the plugins required but it's possible we need to add more.

If not I'll pick it up again in the morning.

Quoted 7 lines
Quoted 2 lines

Thanks,
Joshua

_______________________________________________
yocto mailing list
[email protected]
https://lists.pokylinux.org/listinfo/yocto

--
Joshua Lock
Intel Open Source Technology Centre

_______________________________________________
yocto mailing list
[email protected]
https://lists.pokylinux.org/listinfo/yocto

#4 lore raw
In reply to Saul Wold
Quoted 4 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

I did a sloppy job pushing my changes when leaving the office but think I have replicated most/all of the in the josh/demo branch.

I also took a look through the rygel code to see what gstreamer elements are explicitly being used, I've created a list and tried to ensure as many as possible of them are in the IMAGE_INSTALL list for poky-image-rygel, adding them to the RDEPENDS for rygel doesn't appear to have included them in the image I just created...

Full list of names of pipeline elements I found in the rygel code follows:

decodebin2, videorate, videoscale, ffmpegcolorspace, ffenc_wmv1, twolame, lame, mp3parse, ffenc_wmav2, convert-sink-pad, ffenc_mpeg2video, audio-src-pad, audio-sink-pad, audio-enc-sink-pad, sink, mpegtsmux, audioconvert, audioresample, audiorate, capsfilter, audiotestsrc, videotestsrc, ffmux_asf

Cheers,
Joshua

Quoted 31 lines

Thanks
Sau!

Quoted 12 lines · Joshua Lock

Hi all,

I've packaged Rygel, a upnp media server and renderer, to use as the media renderer in the upnp demo. However I'm seeing a segfault at launch and as it's getting late here I'm wondering if someone in a strategic timezone can help debug while I cycle home and sleep.

The (ugly) recipes are in the josh/demo branch of the meta-demo repository.

rygel --gst-debug-level=5

Quoted 8 lines

shows plenty of output, but nothing that jumps out to a gstreamer newb like me. AFAICT I have all of the plugins required but it's possible we need to add more.

If not I'll pick it up again in the morning.

Thanks,
Joshua

_______________________________________________
yocto mailing list
[email protected]
https://lists.pokylinux.org/listinfo/yocto

Signature · 2 lines
Joshua Lock
        Intel Open Source Technology Centre
#5 lore raw
Quoted 18 lines

From: Joshua Lock
Sent: Wednesday, October 20, 2010 8:05 AM

Quoted 4 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

I did a sloppy job pushing my changes when leaving the office but think I have replicated most/all of the in the josh/demo branch.

I also took a look through the rygel code to see what gstreamer elements are explicitly being used, I've created a list and tried to ensure as many as possible of them are in the IMAGE_INSTALL list for poky-image-rygel, adding them to the RDEPENDS for rygel doesn't appear to have included them in the image I just created...

Quoted 8 lines

Full list of names of pipeline elements I found in the rygel code follows:

decodebin2, videorate, videoscale, ffmpegcolorspace, ffenc_wmv1, twolame, lame, mp3parse, ffenc_wmav2, convert-sink-pad, ffenc_mpeg2video, audio-src-pad, audio-sink-pad, audio-enc-sink-pad, sink, mpegtsmux, audioconvert, audioresample, audiorate, capsfilter, audiotestsrc, videotestsrc, ffmux_asf

Have all of above elements already enabled in your branch, or is it still in progress to follow up?

Is it a separate issue from segfault or related in your gut-feeling?

Thanks
Kevin

Quoted 44 lines

Cheers,
Joshua

Quoted 24 lines

Thanks
Sau!

Quoted 18 lines · Joshua Lock

Hi all,

I've packaged Rygel, a upnp media server and renderer, to use as the media renderer in the upnp demo. However I'm seeing a segfault at launch and as it's getting late here I'm wondering if someone in a strategic timezone can help debug while I cycle home and sleep.

The (ugly) recipes are in the josh/demo branch of the meta-demo repository.

rygel --gst-debug-level=5

shows plenty of output, but nothing that jumps out to a gstreamer newb like me. AFAICT I have all of the plugins required but it's possible we need to add more.

If not I'll pick it up again in the morning.

Quoted 7 lines
Quoted 2 lines

Thanks,
Joshua

_______________________________________________
yocto mailing list
[email protected]
https://lists.pokylinux.org/listinfo/yocto

--
Joshua Lock
Intel Open Source Technology Centre

_______________________________________________
yocto mailing list
[email protected]
https://lists.pokylinux.org/listinfo/yocto

#6 lore raw
Quoted 8 lines · Kevin

From: Joshua Lock

Quoted 7 lines

Sent: Wednesday, October 20, 2010 8:05 AM

Quoted 4 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the

gstreamer?

Quoted 2 lines
Quoted 2 lines

I did a sloppy job pushing my changes when leaving the office but

think

Quoted 3 lines
Quoted 3 lines

I have replicated most/all of the in the josh/demo branch.

I also took a look through the rygel code to see what gstreamer

elements

Quoted 3 lines
Quoted 3 lines

are explicitly being used, I've created a list and tried to ensure as many as possible of them are in the IMAGE_INSTALL list for poky-image-rygel, adding them to the RDEPENDS for rygel doesn't

appear

Quoted 5 lines
Quoted 5 lines

to have included them in the image I just created...

Full list of names of pipeline elements I found in the rygel code follows:

Quoted 7 lines
Quoted 5 lines

decodebin2, videorate, videoscale, ffmpegcolorspace, ffenc_wmv1, twolame, lame, mp3parse, ffenc_wmav2, convert-sink-pad, ffenc_mpeg2video, audio-src-pad, audio-sink-pad, audio-enc-sink-pad, sink, mpegtsmux, audioconvert, audioresample, audiorate, capsfilter, audiotestsrc, videotestsrc, ffmux_asf

Have all of above elements already enabled in your branch, or is it

still

Quoted 2 lines

in progress to follow up?

They have now.

Quoted 2 lines

Is it a separate issue from segfault or related in your gut-feeling?

Definitely related, rygel launches without segfault now. It doesn't explicitly specify which elements are required at build time and for at least some of them doesn't handle them not being there very well at all.

Cheers,
Joshua

Signature · 2 lines
Joshua Lock
        Intel Open Source Technology Centre
#7 lore raw
In reply to Joshua Lock
Quoted 15 lines · Joshua Lock
Quoted 4 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

I did a sloppy job pushing my changes when leaving the office but think I have replicated most/all of the in the josh/demo branch.

I also took a look through the rygel code to see what gstreamer elements are explicitly being used, I've created a list and tried to ensure as many as possible of them are in the IMAGE_INSTALL list for poky-image-rygel, adding them to the RDEPENDS for rygel doesn't appear to have included them in the image I just created...

Quoted 9 lines

Full list of names of pipeline elements I found in the rygel code follows:

decodebin2, videorate, videoscale, ffmpegcolorspace, ffenc_wmv1, twolame, lame, mp3parse, ffenc_wmav2, convert-sink-pad, ffenc_mpeg2video, audio-src-pad, audio-sink-pad, audio-enc-sink-pad, sink, mpegtsmux, audioconvert, audioresample, audiorate, capsfilter, audiotestsrc, videotestsrc, ffmux_asf

The image I just built with my latest changes in josh/demo worked!?! Rygel did not segfault :-)

If you have time Dongxiao (or anyone else) I'd appreciate if you could double-check my changes (my install_append in rygel to create a .config isn't working, so you'll need to do that manually and run rygel-preferences to disable the tracker plugin).
If you could test using Rygel as a renderer for some content served by the mediatomb image, that would be much appreciated. You'll want gupnp-av-cp as provided by gupnp-tools to control the renderer and content server.

Thanks,
Joshua

Signature · 2 lines
Joshua Lock
        Intel Open Source Technology Centre
#8 lore raw
Quoted 29 lines · Joshua Lock
Quoted 15 lines · Joshua Lock
Quoted 4 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

I did a sloppy job pushing my changes when leaving the office but think I have replicated most/all of the in the josh/demo branch.

I also took a look through the rygel code to see what gstreamer elements are explicitly being used, I've created a list and tried to ensure as many as possible of them are in the IMAGE_INSTALL list for poky-image-rygel, adding them to the RDEPENDS for rygel doesn't appear to have included them in the image I just created...

Quoted 9 lines

Full list of names of pipeline elements I found in the rygel code follows:

decodebin2, videorate, videoscale, ffmpegcolorspace, ffenc_wmv1, twolame, lame, mp3parse, ffenc_wmav2, convert-sink-pad, ffenc_mpeg2video, audio-src-pad, audio-sink-pad, audio-enc-sink-pad, sink, mpegtsmux, audioconvert, audioresample, audiorate, capsfilter, audiotestsrc, videotestsrc, ffmux_asf

The image I just built with my latest changes in josh/demo worked!?! Rygel did not segfault :-)

Quoted 8 lines

If you have time Dongxiao (or anyone else) I'd appreciate if you could double-check my changes (my install_append in rygel to create a .config isn't working, so you'll need to do that manually and run rygel-preferences to disable the tracker plugin).
If you could test using Rygel as a renderer for some content served by the mediatomb image, that would be much appreciated. You'll want gupnp-av-cp as provided by gupnp-tools to control the renderer and content server.

It is my udnerstanding that we plan to run both the renderer and the gupnp-av-cp on each "player". That is an ARM BeagleBoard and a PowerPC *unknown* board. Each will have a suitable display. Is this your understanding/intention?

Signature · 2 lines
Darren Hart
Embedded Linux Kernel
#9 lore raw
Quoted 42 lines

From: Darren Hart
Sent: Wednesday, October 20, 2010 8:24 AM

Quoted 29 lines · Joshua Lock
Quoted 15 lines · Joshua Lock
Quoted 4 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

I did a sloppy job pushing my changes when leaving the office but think I have replicated most/all of the in the josh/demo branch.

I also took a look through the rygel code to see what gstreamer elements are explicitly being used, I've created a list and tried to ensure as many as possible of them are in the IMAGE_INSTALL list for poky-image-rygel, adding them to the RDEPENDS for rygel doesn't appear to have included them in the image I just created...

Quoted 9 lines

Full list of names of pipeline elements I found in the rygel code follows:

decodebin2, videorate, videoscale, ffmpegcolorspace, ffenc_wmv1, twolame, lame, mp3parse, ffenc_wmav2, convert-sink-pad, ffenc_mpeg2video, audio-src-pad, audio-sink-pad, audio-enc-sink-pad, sink, mpegtsmux, audioconvert, audioresample, audiorate, capsfilter, audiotestsrc, videotestsrc, ffmux_asf

The image I just built with my latest changes in josh/demo worked!?! Rygel did not segfault :-)

Quoted 8 lines

If you have time Dongxiao (or anyone else) I'd appreciate if you could double-check my changes (my install_append in rygel to create a .config isn't working, so you'll need to do that manually and run rygel-preferences to disable the tracker plugin).
If you could test using Rygel as a renderer for some content served by the mediatomb image, that would be much appreciated. You'll want gupnp-av-cp as provided by gupnp-tools to control the renderer and content server.

Quoted 5 lines

It is my udnerstanding that we plan to run both the renderer and the gupnp-av-cp on each "player". That is an ARM BeagleBoard and a PowerPC *unknown* board. Each will have a suitable display. Is this your understanding/intention?

I guess Josh may go to bed now. :-)

btw, Darren, do we have to use real boards for the exercise? We don't have those boards in PRC. Any limitations to use Qemu environments as the alternative in our side?

Also it'd be great if we have a detail list for demo steps. Is it included in the demo branch?

Thanks
Kevin

#10 lore raw
Quoted 51 lines

From: Tian, Kevin
Sent: Wednesday, October 20, 2010 8:31 AM

Quoted 42 lines

From: Darren Hart
Sent: Wednesday, October 20, 2010 8:24 AM

Quoted 29 lines · Joshua Lock
Quoted 15 lines · Joshua Lock
Quoted 4 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

I did a sloppy job pushing my changes when leaving the office but think I have replicated most/all of the in the josh/demo branch.

I also took a look through the rygel code to see what gstreamer elements are explicitly being used, I've created a list and tried to ensure as many as possible of them are in the IMAGE_INSTALL list for poky-image-rygel, adding them to the RDEPENDS for rygel doesn't appear to have included them in the image I just created...

Quoted 9 lines

Full list of names of pipeline elements I found in the rygel code follows:

decodebin2, videorate, videoscale, ffmpegcolorspace, ffenc_wmv1, twolame, lame, mp3parse, ffenc_wmav2, convert-sink-pad, ffenc_mpeg2video, audio-src-pad, audio-sink-pad, audio-enc-sink-pad, sink, mpegtsmux, audioconvert, audioresample, audiorate, capsfilter, audiotestsrc, videotestsrc, ffmux_asf

The image I just built with my latest changes in josh/demo worked!?! Rygel did not segfault :-)

Quoted 8 lines

If you have time Dongxiao (or anyone else) I'd appreciate if you could double-check my changes (my install_append in rygel to create a .config isn't working, so you'll need to do that manually and run rygel-preferences to disable the tracker plugin).
If you could test using Rygel as a renderer for some content served by the mediatomb image, that would be much appreciated. You'll want gupnp-av-cp as provided by gupnp-tools to control the renderer and content server.

Quoted 5 lines

It is my udnerstanding that we plan to run both the renderer and the gupnp-av-cp on each "player". That is an ARM BeagleBoard and a PowerPC *unknown* board. Each will have a suitable display. Is this your understanding/intention?

Quoted 5 lines

I guess Josh may go to bed now. :-)

btw, Darren, do we have to use real boards for the exercise? We don't have those boards in PRC. Any limitations to use Qemu environments as the alternative in our side?

Oops, we do have netbooks which I forgot. :-)

Thanks
Keivn

Quoted 4 lines

Also it'd be great if we have a detail list for demo steps. Is it included in the demo branch?

#11 lore raw
In reply to Tian, Kevin
Quoted 48 lines · Kevin
Quoted 42 lines

From: Darren Hart
Sent: Wednesday, October 20, 2010 8:24 AM

Quoted 29 lines · Joshua Lock
Quoted 15 lines · Joshua Lock
Quoted 4 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

I did a sloppy job pushing my changes when leaving the office but think I have replicated most/all of the in the josh/demo branch.

I also took a look through the rygel code to see what gstreamer elements are explicitly being used, I've created a list and tried to ensure as many as possible of them are in the IMAGE_INSTALL list for poky-image-rygel, adding them to the RDEPENDS for rygel doesn't appear to have included them in the image I just created...

Quoted 9 lines

Full list of names of pipeline elements I found in the rygel code follows:

decodebin2, videorate, videoscale, ffmpegcolorspace, ffenc_wmv1, twolame, lame, mp3parse, ffenc_wmav2, convert-sink-pad, ffenc_mpeg2video, audio-src-pad, audio-sink-pad, audio-enc-sink-pad, sink, mpegtsmux, audioconvert, audioresample, audiorate, capsfilter, audiotestsrc, videotestsrc, ffmux_asf

The image I just built with my latest changes in josh/demo worked!?! Rygel did not segfault :-)

Quoted 8 lines

If you have time Dongxiao (or anyone else) I'd appreciate if you could double-check my changes (my install_append in rygel to create a .config isn't working, so you'll need to do that manually and run rygel-preferences to disable the tracker plugin).
If you could test using Rygel as a renderer for some content served by the mediatomb image, that would be much appreciated. You'll want gupnp-av-cp as provided by gupnp-tools to control the renderer and content server.

Quoted 5 lines

It is my udnerstanding that we plan to run both the renderer and the gupnp-av-cp on each "player". That is an ARM BeagleBoard and a PowerPC *unknown* board. Each will have a suitable display. Is this your understanding/intention?

Quoted 5 lines

I guess Josh may go to bed now. :-)

btw, Darren, do we have to use real boards for the exercise? We don't have those boards in PRC. Any limitations to use Qemu environments as the alternative in our side?

For testing the images, you can use all x86 hardware. I'd prefer we not use QEMU as it is likely to complicate the networking, which is rather integral to this demo.

Quoted 3 lines

Also it'd be great if we have a detail list for demo steps. Is it included in the demo branch?

No documented steps yet, just build the live images in the demo layers and boot on hardware. If you run into issues, please share them here and we'll help work through them.

Thanks,

Signature · 2 lines
Darren Hart
Embedded Linux Kernel
#12 lore raw
In reply to Joshua Lock
Quoted 38 lines · Joshua Lock
Quoted 16 lines · Joshua Lock
Quoted 5 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

I did a sloppy job pushing my changes when leaving the office but think I have replicated most/all of the in the josh/demo branch.

I also took a look through the rygel code to see what gstreamer elements are explicitly being used, I've created a list and tried to ensure as many as possible of them are in the IMAGE_INSTALL list for poky-image-rygel, adding them to the RDEPENDS for rygel doesn't appear to have included them in the image I just created...

Quoted 9 lines

Full list of names of pipeline elements I found in the rygel code follows:

decodebin2, videorate, videoscale, ffmpegcolorspace, ffenc_wmv1, twolame, lame, mp3parse, ffenc_wmav2, convert-sink-pad, ffenc_mpeg2video, audio-src-pad, audio-sink-pad, audio-enc-sink-pad, sink, mpegtsmux, audioconvert, audioresample, audiorate, capsfilter, audiotestsrc, videotestsrc, ffmux_asf

The image I just built with my latest changes in josh/demo worked!?! Rygel did not segfault :-)

If you have time Dongxiao (or anyone else) I'd appreciate if you could double-check my changes (my install_append in rygel to create a .config isn't working, so you'll need to do that manually and run rygel-preferences to disable the tracker plugin). If you could test using Rygel as a renderer for some content served by the mediatomb image, that would be much appreciated. You'll want gupnp-av-cp as provided by gupnp-tools to control the renderer and content server.

Quoted 2 lines

Thanks,
Joshua

I will try your branch, however I didn't find josh/demo in poky-contrib. Is it reside in other place?

Thanks,
Dongxiao

#13 lore raw
Quoted 39 lines · Dongxiao
Quoted 38 lines · Joshua Lock
Quoted 16 lines · Joshua Lock
Quoted 5 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

I did a sloppy job pushing my changes when leaving the office but think I have replicated most/all of the in the josh/demo branch.

I also took a look through the rygel code to see what gstreamer elements are explicitly being used, I've created a list and tried to ensure as many as possible of them are in the IMAGE_INSTALL list for poky-image-rygel, adding them to the RDEPENDS for rygel doesn't appear to have included them in the image I just created...

Quoted 9 lines

Full list of names of pipeline elements I found in the rygel code follows:

decodebin2, videorate, videoscale, ffmpegcolorspace, ffenc_wmv1, twolame, lame, mp3parse, ffenc_wmav2, convert-sink-pad, ffenc_mpeg2video, audio-src-pad, audio-sink-pad, audio-enc-sink-pad, sink, mpegtsmux, audioconvert, audioresample, audiorate, capsfilter, audiotestsrc, videotestsrc, ffmux_asf

The image I just built with my latest changes in josh/demo worked!?! Rygel did not segfault :-)

If you have time Dongxiao (or anyone else) I'd appreciate if you could double-check my changes (my install_append in rygel to create a .config isn't working, so you'll need to do that manually and run rygel-preferences to disable the tracker plugin). If you could test using Rygel as a renderer for some content served by the mediatomb image, that would be much appreciated. You'll want gupnp-av-cp as provided by gupnp-tools to control the renderer and content server.

Quoted 6 lines
Quoted 2 lines

Thanks,
Joshua

I will try your branch, however I didn't find josh/demo in poky-contrib. Is it reside in other place?

It should be here:

ssh://[email protected]/meta-demo.git

Tom

#14 lore raw
Quoted 47 lines · Tom
Quoted 39 lines · Dongxiao
Quoted 38 lines · Joshua Lock
Quoted 16 lines · Joshua Lock
Quoted 5 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

I did a sloppy job pushing my changes when leaving the office but think I have replicated most/all of the in the josh/demo branch.

I also took a look through the rygel code to see what gstreamer elements are explicitly being used, I've created a list and tried to ensure as many as possible of them are in the IMAGE_INSTALL list for poky-image-rygel, adding them to the RDEPENDS for rygel doesn't appear to have included them in the image I just created...

Quoted 9 lines

Full list of names of pipeline elements I found in the rygel code follows:

decodebin2, videorate, videoscale, ffmpegcolorspace, ffenc_wmv1, twolame, lame, mp3parse, ffenc_wmav2, convert-sink-pad, ffenc_mpeg2video, audio-src-pad, audio-sink-pad, audio-enc-sink-pad, sink, mpegtsmux, audioconvert, audioresample, audiorate, capsfilter, audiotestsrc, videotestsrc, ffmux_asf

The image I just built with my latest changes in josh/demo worked!?! Rygel did not segfault :-)

If you have time Dongxiao (or anyone else) I'd appreciate if you could double-check my changes (my install_append in rygel to create a .config isn't working, so you'll need to do that manually and run rygel-preferences to disable the tracker plugin). If you could test using Rygel as a renderer for some content served by the mediatomb image, that would be much appreciated. You'll want gupnp-av-cp as provided by gupnp-tools to control the renderer and content server.

Quoted 6 lines
Quoted 2 lines

Thanks,
Joshua

I will try your branch, however I didn't find josh/demo in poky-contrib. Is it reside in other place?

Quoted 5 lines

It should be here:

ssh://[email protected]/meta-demo.git

Tom

Got it, thanks!

Dongxiao

#15 lore raw

I just built out the poky-image-rygel image with your meta-demo layer, and run

rygel --gst-debug-level=5

I still saw it "segmentation fault" in the last...

I am looking into it.

Thanks,
Dongxiao

Quoted 62 lines · Dongxiao
Quoted 48 lines · Tom
Quoted 40 lines · Dongxiao
Quoted 39 lines · Joshua Lock
Quoted 17 lines · Joshua Lock
Quoted 5 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

I did a sloppy job pushing my changes when leaving the office but think I have replicated most/all of the in the josh/demo branch.

I also took a look through the rygel code to see what gstreamer elements are explicitly being used, I've created a list and tried to ensure as many as possible of them are in the IMAGE_INSTALL list for poky-image-rygel, adding them to the RDEPENDS for rygel doesn't appear to have included them in the image I just created...

Quoted 9 lines

Full list of names of pipeline elements I found in the rygel code follows:

decodebin2, videorate, videoscale, ffmpegcolorspace, ffenc_wmv1, twolame, lame, mp3parse, ffenc_wmav2, convert-sink-pad, ffenc_mpeg2video, audio-src-pad, audio-sink-pad, audio-enc-sink-pad, sink, mpegtsmux, audioconvert, audioresample, audiorate, capsfilter, audiotestsrc, videotestsrc, ffmux_asf

The image I just built with my latest changes in josh/demo worked!?! Rygel did not segfault :-)

If you have time Dongxiao (or anyone else) I'd appreciate if you could double-check my changes (my install_append in rygel to create a .config isn't working, so you'll need to do that manually and run rygel-preferences to disable the tracker plugin). If you could test using Rygel as a renderer for some content served by the mediatomb image, that would be much appreciated. You'll want gupnp-av-cp as provided by gupnp-tools to control the renderer and content server.

Quoted 6 lines
Quoted 2 lines

Thanks,
Joshua

I will try your branch, however I didn't find josh/demo in poky-contrib. Is it reside in other place?

Quoted 5 lines

It should be here:

ssh://[email protected]/meta-demo.git

Tom

Got it, thanks!

Dongxiao
_______________________________________________
yocto mailing list
[email protected]
https://lists.pokylinux.org/listinfo/yocto

#16 lore raw

Hi Josh,

Today I took a glance at the rygel crash issue in poky. Though I didn't get the root cause, I found when configure Tracker plugin into rygel, the segmentation fault will happen. Since we have already configured the media-export plugin, and tracker plugin plays the same role, I think we can simply disable tracker plugin (by configure time or change by rygel-preferences) for demo usage.

Thanks,
Dongxiao

Quoted 76 lines · Dongxiao

I just built out the poky-image-rygel image with your meta-demo layer, and run

rygel --gst-debug-level=5

I still saw it "segmentation fault" in the last...

I am looking into it.

Thanks,
Dongxiao

Quoted 63 lines · Dongxiao
Quoted 49 lines · Tom
Quoted 41 lines · Dongxiao
Quoted 40 lines · Joshua Lock
Quoted 17 lines · Joshua Lock
Quoted 5 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

I did a sloppy job pushing my changes when leaving the office but think I have replicated most/all of the in the josh/demo branch.

I also took a look through the rygel code to see what gstreamer elements are explicitly being used, I've created a list and tried to ensure as many as possible of them are in the IMAGE_INSTALL list for poky-image-rygel, adding them to the RDEPENDS for rygel doesn't appear to have included them in the image I just created...

Quoted 9 lines

Full list of names of pipeline elements I found in the rygel code follows:

decodebin2, videorate, videoscale, ffmpegcolorspace, ffenc_wmv1, twolame, lame, mp3parse, ffenc_wmav2, convert-sink-pad, ffenc_mpeg2video, audio-src-pad, audio-sink-pad, audio-enc-sink-pad, sink, mpegtsmux, audioconvert, audioresample, audiorate, capsfilter, audiotestsrc, videotestsrc, ffmux_asf

The image I just built with my latest changes in josh/demo worked!?! Rygel did not segfault :-)

If you have time Dongxiao (or anyone else) I'd appreciate if you could double-check my changes (my install_append in rygel to create a .config isn't working, so you'll need to do that manually and run rygel-preferences to disable the tracker plugin). If you could test using Rygel as a renderer for some content served by the mediatomb image, that would be much appreciated. You'll want gupnp-av-cp as provided by gupnp-tools to control the renderer and content server.

Quoted 6 lines
Quoted 2 lines

Thanks,
Joshua

I will try your branch, however I didn't find josh/demo in poky-contrib. Is it reside in other place?

Quoted 5 lines

It should be here:

ssh://[email protected]/meta-demo.git

Tom

Got it, thanks!

Dongxiao
_______________________________________________
yocto mailing list
[email protected]
https://lists.pokylinux.org/listinfo/yocto

#17 lore raw
Quoted 8 lines · Dongxiao

Hi Josh,

Today I took a glance at the rygel crash issue in poky. Though I didn't get the root cause, I found when configure Tracker plugin into rygel, the segmentation fault will happen. Since we have already configured the media-export plugin, and tracker plugin plays the same role, I think we can simply disable tracker plugin (by configure time or change by rygel-preferences) for demo usage.

Yes, I thought I mentioned disabling the tracker plugin in an earlier mail? I'll prepare a patch to the recipe to disable that so we don't have to remember to do that by hand.

Cheers,
Joshua

Quoted 82 lines

Thanks,
Dongxiao

Quoted 76 lines · Dongxiao

I just built out the poky-image-rygel image with your meta-demo layer, and run

rygel --gst-debug-level=5

I still saw it "segmentation fault" in the last...

I am looking into it.

Thanks,
Dongxiao

Quoted 63 lines · Dongxiao
Quoted 49 lines · Tom
Quoted 41 lines · Dongxiao
Quoted 40 lines · Joshua Lock
Quoted 17 lines · Joshua Lock
Quoted 5 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

I did a sloppy job pushing my changes when leaving the office but think I have replicated most/all of the in the josh/demo branch.

I also took a look through the rygel code to see what gstreamer elements are explicitly being used, I've created a list and tried to ensure as many as possible of them are in the IMAGE_INSTALL list for poky-image-rygel, adding them to the RDEPENDS for rygel doesn't appear to have included them in the image I just created...

Quoted 9 lines

Full list of names of pipeline elements I found in the rygel code follows:

decodebin2, videorate, videoscale, ffmpegcolorspace, ffenc_wmv1, twolame, lame, mp3parse, ffenc_wmav2, convert-sink-pad, ffenc_mpeg2video, audio-src-pad, audio-sink-pad, audio-enc-sink-pad, sink, mpegtsmux, audioconvert, audioresample, audiorate, capsfilter, audiotestsrc, videotestsrc, ffmux_asf

The image I just built with my latest changes in josh/demo worked!?! Rygel did not segfault :-)

If you have time Dongxiao (or anyone else) I'd appreciate if you could double-check my changes (my install_append in rygel to create a .config isn't working, so you'll need to do that manually and run rygel-preferences to disable the tracker plugin). If you could test using Rygel as a renderer for some content served by the mediatomb image, that would be much appreciated. You'll want gupnp-av-cp as provided by gupnp-tools to control the renderer and content server.

Quoted 6 lines
Quoted 2 lines

Thanks,
Joshua

I will try your branch, however I didn't find josh/demo in poky-contrib. Is it reside in other place?

Quoted 5 lines

It should be here:

ssh://[email protected]/meta-demo.git

Tom

Got it, thanks!

Dongxiao
_______________________________________________
yocto mailing list
[email protected]
https://lists.pokylinux.org/listinfo/yocto

Signature · 2 lines
Joshua Lock
        Intel Open Source Technology Centre
#18 lore raw
Quoted 10 lines · Joshua Lock
Quoted 8 lines · Dongxiao

Hi Josh,

Today I took a glance at the rygel crash issue in poky. Though I didn't get the root cause, I found when configure Tracker plugin into rygel, the segmentation fault will happen. Since we have already configured the media-export plugin, and tracker plugin plays the same role, I think we can simply disable tracker plugin (by configure time or change by rygel-preferences) for demo usage.

Quoted 3 lines

Yes, I thought I mentioned disabling the tracker plugin in an earlier mail? I'll prepare a patch to the recipe to disable that so we don't have to remember to do that by hand.

Ah, oops. I didn't read your previous mail carefully... But luckily it didn't cost too much time. :-)

Thanks,
Dongxiao

Quoted 87 lines

Cheers,
Joshua

Quoted 83 lines

Thanks,
Dongxiao

Quoted 78 lines · Dongxiao

I just built out the poky-image-rygel image with your meta-demo layer, and run

rygel --gst-debug-level=5

I still saw it "segmentation fault" in the last...

I am looking into it.

Thanks,
Dongxiao

Quoted 65 lines · Dongxiao
Quoted 51 lines · Tom
Quoted 43 lines · Dongxiao
Quoted 42 lines · Joshua Lock
Quoted 21 lines · Joshua Lock
Quoted 5 lines · Saul Wold

Dongxiao,

Can you take a look at this since you have worked with the gstreamer?

I did a sloppy job pushing my changes when leaving the office but think I have replicated most/all of the in the josh/demo branch.

I also took a look through the rygel code to see what gstreamer elements are explicitly being used, I've created a list and tried to ensure as many as possible of them are in the IMAGE_INSTALL list for poky-image-rygel, adding them to the RDEPENDS for rygel doesn't appear to have included them in the image I just created...

Full list of names of pipeline elements I found in the rygel code follows:

Quoted 7 lines

decodebin2, videorate, videoscale, ffmpegcolorspace, ffenc_wmv1, twolame, lame, mp3parse, ffenc_wmav2, convert-sink-pad, ffenc_mpeg2video, audio-src-pad, audio-sink-pad, audio-enc-sink-pad, sink, mpegtsmux, audioconvert, audioresample, audiorate, capsfilter, audiotestsrc, videotestsrc, ffmux_asf

The image I just built with my latest changes in josh/demo worked!?! Rygel did not segfault :-)

If you have time Dongxiao (or anyone else) I'd appreciate if you could double-check my changes (my install_append in rygel to create a .config isn't working, so you'll need to do that manually and run rygel-preferences to disable the tracker plugin). If you could test using Rygel as a renderer for some content served by the mediatomb image, that would be much appreciated. You'll want gupnp-av-cp as provided by gupnp-tools to control the renderer and content server.

Quoted 6 lines
Quoted 2 lines

Thanks,
Joshua

I will try your branch, however I didn't find josh/demo in poky-contrib. Is it reside in other place?

Quoted 5 lines

It should be here:

ssh://[email protected]/meta-demo.git

Tom

Got it, thanks!

Dongxiao
_______________________________________________
yocto mailing list
[email protected]
https://lists.pokylinux.org/listinfo/yocto