Add board support for hawkboard
PATCH v4 3/3 Add board support for hawkboard
---
Changes since V3
* Added README.hawkboard
* Moved setting of select_chip to nand_boot function
* Removed the superfluous entry in board/davinci/da8xxevm/Makefile added earlier.
MAINTAINERS | 5 + arch/arm/include/asm/arch-davinci/da8xx_common.h | 3 + arch/arm/include/asm/arch-davinci/hardware.h | 5 +- board/davinci/common/Makefile | 2 +- board/davinci/common/davinci_pinmux.c | 105 +++++++++++ board/davinci/common/misc.c | 75 -------- board/davinci/da8xxevm/Makefile | 1 + board/davinci/da8xxevm/hawkboard.c | 69 ++++++++ board/davinci/da8xxevm/hawkboard_nand_spl.c | 164 +++++++++++++++++ boards.cfg | 3 + doc/README.hawkboard | 93 ++++++++++ include/configs/hawkboard.h | 204 ++++++++++++++++++++++ nand_spl/board/davinci/da8xxevm/Makefile | 141 +++++++++++++++ nand_spl/board/davinci/da8xxevm/u-boot.lds | 75 ++++++++ nand_spl/nand_boot.c | 1 + 15 files changed, 869 insertions(+), 77 deletions(-) create mode 100644 board/davinci/common/davinci_pinmux.c create mode 100644 board/davinci/da8xxevm/hawkboard.c create mode 100644 board/davinci/da8xxevm/hawkboard_nand_spl.c create mode 100644 doc/README.hawkboard create mode 100644 include/configs/hawkboard.h create mode 100644 nand_spl/board/davinci/da8xxevm/Makefile create mode 100644 nand_spl/board/davinci/da8xxevm/u-boot.lds
MAINTAINERS +5 -0
@@ -851,6 +851,11 @@ Alex Z lart SA1100 dnp1110 SA1110 +Syed Mohammed Khasim <[email protected]> +Sughosh Ganu <[email protected]> + + hawkboard ARM926EJS (OMAP-L138) + ------------------------------------------------------------------------- Unknown / orphaned boards:
arch/arm/include/asm/arch-davinci/da8xx_common.h +3 -0
@@ -19,6 +19,9 @@#ifndef __COMMON_H#define __COMMON_H +#define HAWKBOARD_KICK0_UNLOCK 0x83e70b13 +#define HAWKBOARD_KICK1_UNLOCK 0x95a4f1e0 +struct lpsc_resource {const int lpsc_no; };
arch/arm/include/asm/arch-davinci/hardware.h +4 -1
@@ -379,7 +379,10 @@ int clk_get(enum davinci_clk_ids id);/* Boot config */ struct davinci_syscfg_regs {dv_reg revid; -dv_reg rsvd[71 ]; +dv_reg rsvd[13 ]; +dv_reg kick0; +dv_reg kick1; +dv_reg rsvd1[56 ];dv_reg pinmux[20 ];dv_reg suspsrc;dv_reg chipsig;
board/davinci/common/Makefile +1 -1
@@ -29,7 +29,7 @@ endif LIB = $(obj)lib$(VENDOR).a -COBJS := misc.o +COBJS := misc.o davinci_pinmux.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS))
board/davinci/common/davinci_pinmux.c new file +105 -0
105 lines not on this page · raw message
board/davinci/common/misc.c +0 -75
78 lines not on this page · raw message
board/davinci/da8xxevm/Makefile +1 -0
@@ -30,6 +30,7 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += common.o COBJS-$(CONFIG_MACH_DAVINCI_DA830_EVM) += da830evm.o COBJS-$(CONFIG_MACH_DAVINCI_DA850_EVM) += da850evm.o +COBJS-$(CONFIG_MACH_DAVINCI_HAWK) += hawkboard.o COBJS := $(COBJS-y)
board/davinci/da8xxevm/hawkboard.c new file +69 -0
69 lines not on this page · raw message
board/davinci/da8xxevm/hawkboard_nand_spl.c new file +164 -0
164 lines not on this page · raw message
boards.cfg +3 -0
@@ -372,6 +372,9 @@ davinci_sffsdr arm arm926ejs sffsdr davinci davinci davinci_sonata arm arm926ejs sonata davinci davinci da830evm arm arm926ejs da8xxevm davinci davinci da850evm arm arm926ejs da8xxevm davinci davinci +hawkboard arm arm926ejs da8xxevm davinci davinci hawkboard:SYS_TEXT_BASE=0xc1180000 +hawkboard_nand arm arm926ejs da8xxevm davinci davinci hawkboard:SYS_TEXT_BASE=0xc1080000,NAND_U_BOOT +hawkboard_uart arm arm926ejs da8xxevm davinci davinci hawkboard:SYS_TEXT_BASE=0xc1080000 guruplug arm arm926ejs - Marvell kirkwood mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood openrd_base arm arm926ejs - Marvell kirkwood
doc/README.hawkboard new file +93 -0
93 lines not on this page · raw message
include/configs/hawkboard.h new file +204 -0
204 lines not on this page · raw message
nand_spl/board/davinci/da8xxevm/Makefile new file +141 -0
141 lines not on this page · raw message
nand_spl/board/davinci/da8xxevm/u-boot.lds new file +75 -0
75 lines not on this page · raw message
nand_spl/nand_boot.c +1 -0
@@ -236,6 +236,7 @@ void nand_boot(void)/* * Init board specific nand support */ + nand_chip.select_chip =NULL ; nand_info.priv = &nand_chip; nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = (void __iomem *)CONFIG_SYS_NAND_BASE ; nand_chip.dev_ready =NULL ;/* preset to NULL */
Signature · 1 line
1.7.0.4
PATCH v4 3/3 Add board support for hawkboard
Quoted 8 lines · Sughosh Ganu
Signed-off-by Sughosh Ganu <[email protected]>---
Changes since V3
? * Added README.hawkboard
? * Moved setting ofselect_chiptonand_bootfunction
? * Removed the superfluous entry in board/davinci/da8xxevm/Makefile ? ? added earlier.
Applies cleanly to 908614f20f7f0f5df736eed21b88e81ebbf14e86 ofgit://git.denx.de/u-boot.git; no checkpatch warnings or errors.
Tested on da850evm with NAND, env.oob and tftp.
Best Regards,
Ben Gardiner
---
Nanometrics Inc.
http://www.nanometrics.ca
PATCH v4 3/3 Add board support for hawkboard
In reply to Sughosh GanuQuoted 24 lines · Sughosh Ganu
Signed-off-by Sughosh Ganu <[email protected]>---
Changes since V3
* Added README.hawkboard
* Moved setting ofselect_chiptonand_bootfunction
* Removed the superfluous entry in board/davinci/da8xxevm/Makefile added earlier.MAINTAINERS | 5 + arch/arm/include/asm/arch-davinci/da8xx_common.h | 3 + arch/arm/include/asm/arch-davinci/hardware.h | 5 +- board/davinci/common/Makefile | 2 +- board/davinci/common/davinci_pinmux.c | 105 +++++++++++ board/davinci/common/misc.c | 75 -------- board/davinci/da8xxevm/Makefile | 1 + board/davinci/da8xxevm/hawkboard.c | 69 ++++++++ board/davinci/da8xxevm/hawkboard_nand_spl.c | 164 +++++++++++++++++ boards.cfg | 3 + doc/README.hawkboard | 93 ++++++++++ include/configs/hawkboard.h | 204 ++++++++++++++++++++++ nand_spl/board/davinci/da8xxevm/Makefile | 141 +++++++++++++++ nand_spl/board/davinci/da8xxevm/u-boot.lds | 75 ++++++++ nand_spl/nand_boot.c | 1 +
Quoted 8 lines
15 files changed, 869 insertions(+), 77 deletions(-) create mode 100644 board/davinci/common/davinci_pinmux.c create mode 100644 board/davinci/da8xxevm/hawkboard.c create mode 100644 board/davinci/da8xxevm/hawkboard_nand_spl.c create mode 100644 doc/README.hawkboard create mode 100644 include/configs/hawkboard.h create mode 100644 nand_spl/board/davinci/da8xxevm/Makefile create mode 100644 nand_spl/board/davinci/da8xxevm/u-boot.lds
Can this be reviewed please. I would need to make some changes for the nand_spl due to the removal of CONFIG_SKIP_RELOCATE_UBOOT. I can post the next version incorporating all the review comments along with this change. Thanks.
-sughosh