apds9802als: add runtime PM support
Quoted 12 lines · Hong Liu
Hi, Alan
Thanks for your help, I still have some questions about the runtime PM after reading the doc you mentioned.
Quoted 5 lines · Alan Stern
Quoted 2 lines · Hong Liu
In
apds9802als_resume, I just want to power up the device, do some configuration, and thenruntime_suspendthe device.
Quoted 6 lines
Quoted 3 lines
Then you should change the function the way I suggested. The PM core will automatically do a runtime suspend after the system has fully woken up.
Would you please point out which part of the code does this? I am trying to find out...
In drivers/base/power/main.c:dpm_complete() there is a call to pm_runtime_put_sync().
Quoted 9 lines
I am still not very clear about who will be in charge of putting the device into runtime suspend state after the
probe(). I saw code in e1000e driver, before your patch (f3ec4f8), it will manually schedule a runtime suspend after 1 second. But with your new code, I can't see which part of the code will put e1000e to runtime suspend.(quoted diff) +0
-0@@ -5721,11 +5721,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, e1000_print_device_info(adapter);
Review static int __devinit e1000_probe(struct pci_dev *pdev, · line 5727
Quoted 10 lines
(quoted diff) +2
-5- if (pci_dev_run_wake(pdev)) { - pm_runtime_set_active(&pdev->dev); - pm_runtime_enable(&pdev->dev); - } - pm_schedule_suspend(&pdev->dev, MSEC_PER_SEC); + if (pci_dev_run_wake(pdev)) + pm_runtime_put_noidle(&pdev->dev); return 0;
I'm not surprised you couldn't find the code; you were looking in the wrong place. After a probe, the runtime suspend is done by either drivers/base/dd.c:driver_probe_device() or device_attach(), depending on whether the driver was already loaded when the device was registered. Both functions call pm_runtime_put_sync().
Quoted 5 lines
I think the runtime PM is working at bottom-up way, the child device will be in charge of itself, and once it decides to put itself into runtime suspend, it's parent will be notified, and if all children are runtime suspended, then the parent can runtime suspend itself. While for runtime resume, the child will runtime resume the parent first.
That's right.
Quoted 11 lines
Quoted 7 lines
Quoted 2 lines
We don't have
runtime_idle()implemented, so I have to manually put the device into runtime suspend.The problem is that the device can be runtime-resumed by code other than your own, and that other code will not always do a runtime-suspend afterward -- it will do a runtime-idle. That's why you need to define a
runtime_idle()callback.I saw subsystem level
runtime_idlewill callruntime_suspendif noruntime_idleis defined for the driver. So do we need to define aruntime_idlein the driver just to callruntime_suspend()?
I didn't realize the subsystem defined runtime_idle for you. In that case no, you don't need to define your own version. But you also don't have to manually put the device into runtime suspend (as you wrote above).
Alan Stern